Synaps CHD-3000 User Manual

CONTENTS

1. SAFETY .............................................................................................................................................................3

2. INTRODUCTION .............................................................................................................................................3

3. FEATURES........................................................................................................................................................4

4. REMOTE CONTROL ......................................................................................................................................5

5. FRONT PANEL ................................................................................................................................................7

6. REAR PANEL ...................................................................................................................................................7

7. CONNECTING YOUR SYSTEM ...................................................................................................................7

8. BASIC OPERATIONS .....................................................................................................................................9

8.1 T

8.2 P

8.3 C

8.4 V

8.5 N

8.6 M

8.7 P

8.8 R

8.9 F

8.10 A

8.11 I

URN ON OWER HANNEL UP/CHANNEL DOWN

OLUME UP/VOLUME DOWN UMBER

AUSE ECALL

AVORITE

STB ...................................................................................................................................................9

..............................................................................................................................................................9

........................................................................................................................9

- ..........................................................................................................................9

...........................................................................................................................................................9

UTE

...............................................................................................................................................................9

............................................................................................................................................................9

.........................................................................................................................................................9

UDIO

......................................................................................................................................................... 10

NFORMATION

............................................................................................................................................. 10

8.12 EPG ............................................................................................................................................................ 10

8.13 TV/RADIO ................................................................................................................................................. 11

8.14 C

8.15 S

8.16 P

HANNEL LIST

LEEP

.......................................................................................................................................................... 12

AGE UP/PAGE DOWN

............................................................................................................................................ 11

................................................................................................................................ 12

8.17 TEXT ......................................................................................................................................................... 12

8.18 S

8.19 F

8.20 Z

UBTITLE IND OOM

.................................................................................................................................................... 12

............................................................................................................................................................ 12

.......................................................................................................................................................... 13

8.21 TV/RCA ..................................................................................................................................................... 13

8.22 M

8.23 V

8.24 E

ENU

.......................................................................................................................................................... 13

IDEO FORMAT

XIT

............................................................................................................................................................ 13

........................................................................................................................................... 13

9. CHANNEL ....................................................................................................................................................... 13

9.1 TV C

HANNEL LIST

......................................................................................................................................... 13

9.1.1 Group ...................................................................................................................................................... 14

9.1.2 Skip ......................................................................................................................................................... 14

9.1.3 Edit ......................................................................................................................................................... 14

9.1.4 Sort ......................................................................................................................................................... 15

9.1.5 Favorite .................................................................................................................................................. 16

9.1.6 Find......................................................................................................................................................... 16

9.2 R

ADIO CHANNEL LIST

.................................................................................................................................... 16

10. TERRESTRIAL OR CABLE TV INSTALLATION ................................................................................... 17

10.1 C

OMMON INTERFACE(OPTIONAL

10.2 CA S

ETTING

...................................................................................................................................................... 19

) ...................................................................................................................... 18

11. SYSTEM .......................................................................................................................................................... 19

11.1 L

11.2 TV S

11.3 L

11.4 T

11.5 S

11.6 C

ANGUAGE

OCAL TIME SETTING IMER TARTUP CHANNEL

HANNEL PLAY TYPE

................................................................................................................................................. 20

YSTEM

................................................................................................................................................. 20

................................................................................................................................. 21

......................................................................................................................................................... 21

..................................................................................................................................... 22

.................................................................................................................................. 23

11.7 OSD S

11.8 P

ARENTAL LOCK

ETTING

............................................................................................................................................. 23

......................................................................................................................................... 24

12. TOOLS ............................................................................................................................................................. 24

12.1 I

12.2 D

NFORMATION

EFAULT SETTING

............................................................................................................................................. 25

...................................................................................................................................... 25

12.2.1 Default Setting: ....................................................................................................................................... 25

12.2.2 Delete All Channel: ................................................................................................................................ 26

12.2.3 LED Power In Standby ........................................................................................................................... 26

12.2.4 Scart Loop .............................................................................................................................................. 26

12.3 S

12.4 U

12.5 B

12.6 N

12.7 U

OFTWARE UPGRADE

PGRADE BY ACKUP TO ETWORK LOCAL SETTING(OPTIONAL PGRADE BY NETWORK(OPTIONAL

USB ......................................................................................................................................... 27

.................................................................................................................................. 26

USB ...................................................................................................................................... 27

) ...................................................................................................... 27

) .......................................................................................................... 27

13. GAME .............................................................................................................................................................. 28

13.1 T

13.2 S

13.3 O

ETRIS

........................................................................................................................................................ 28

NAKE

......................................................................................................................................................... 28

THELLO

.................................................................................................................................................... 28

14. USB ................................................................................................................................................................... 29

14.1 R

14.2 S

14.3 HDD

14.4 PVR S

14.5 F

14.6 USB S

14.7 R

ECORD MANAGER

TORAGE INFORMATION

FORMAT

ETTING

ILE LIST

EMOVE

.................................................................................................................................................... 30

PEED TEST

USB D

..................................................................................................................................... 29

............................................................................................................................................. 29

............................................................................................................................................. 30

........................................................................................................................................ 33

EVICE

............................................................................................................................. 29

................................................................................................................................ 33

15. NEW FEATURES ........................................................................................................................................... 33

15.1 E

15.2 T

15.3 R

QUALIZER IME SHIFT

ECORD

................................................................................................................................................. 33

...................................................................................................................................................... 33

16. TROUBLE SHOOTING ................................................................................................................................. 35

17. SPECIFICATIONS ......................................................................................................................................... 36

MAINS SUPPLY:

OVERLOADING

LIQUIDS:

CLEANING:

from the wall outlet before cleaning .Use a light damp cloth

VENTILATION:

must be left uncovered to allow proper airflow to

ATTACHMENTS:

CONNECTION TO THE

ANTENNA SOCKET

CONNECTION TO THE TV:

LOCA

TION:

1. SAFETY

This HD Receiver has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully.

100 - 250V AC 50/60Hz

: Do not overload wall outlet, extension cord or adapter as this may result in fire or

electric shock.

Keep liquids away from the HD Receiver. The apparatus shall not be exposed to dripping

or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Disconnect the HD Receiver

(no solvents) to dust the HD Receiver.

The slots on top of the HD Receiver the unit. Do not stand the HD Receiver on soft furnishings or carpets. Do not expose the HD Receiver to direct sunlight or do not place it near a heater. Do not stack electronic equipments on top of the Receiver.

Do not use any attachments that are not recommended as these may cause

hazard or damage the HD Receiver.

Disconnect the HD Receiver from the mains before

connecting or disconnecting the cable from the antenna socket. FAILURE TO DO SO CAN DAMAGE THE RECEIVER.

Disconnect the HD Receiver from the mains before connecting or disconnecting the cable from the antenna socket. FAILURE TO DO SO CAN DAMAGE THE TV.

Place the HD Receiver indoor in order not to expose to lightening, rain or sunlight.

2. INTRODUCTION

Thank you for purchasing the HD Receiver. This HD Receiver is fully compliant with the international DVB standard and thus transmits digital images, sounds, information guides and teletext directly to your TV through the terrestrial (THD-3000)broadcasting. Now you can comfortably see and receive digitally transmitted music, news, movie and sports terrestrial broadcasts in your office or at your home. You can enjoy interesting games embedded in HD Receiver. In service search section, both the automatic service search method and the manual search mode are provided. You can save up to 6000 TV and Radio services and work around with the favorite, Lock, Delete, Move and Sort functions. The menu is very modern and supports multiple languages. All functions can be carried out using the remote control and some of the functions can also be carried out using the front panel. The HD Receiver is easy to use and adaptable for future advances. Please be aware that new software may change the functions of the HD Receiver. If you have any difficulties concerning the operation of your HD Receiver, please refer to the relevant section of this manual, including the ‘Troubleshooting’. This Manual will provide you with useful information on using the HD Receiver.

3. FEATURES

 MPEG-Fully DVB-T/C (H.264) HD compliant  6000 channels (TV and Radio) programmable  Multilingual menu text support  Channel switching time less than 1 second  Channel list editing  Favorite channel list editing  True-color On-Screen Display (OSD)  Full Picture In Graphic (PIG) function  Electronic Program Guide (EPG) for on screen channel information  Subtitle supported  Teletext supported by VBI insertion and software emulation  Parental lock facility by channel  Program and Channel information transfer from receiver to receiver  Exciting games embedded  S/PDIF for digital audio or Dolby digital bitstream output  HDMI HD Video/Audio Output  Software update via LAN port(optional)  USB 2.0 Host  LED Display for service information  RTC (Real-Time-Clock)  LAN 10/100 Mbps Ethernet (optional)  Time Shift  Video Recording  Recording one channel and Time Shifting another channel (optional)

4. Remote Control

You can power on/off the receiver, operate on screen menu, and use a variety of hot key function.

POWER

To switch your receiver on from standby or standby to on.

MUTE

Used to enable or disable the audio

NUMERIC KEYS

Used to select channels or enter programming parameters

((((

TV / RADIO)

Receiver switches between TV and Radio mode.

(ZOOM)

Press key select zoom times, from X1 to X16.

(PREVIOUS

Return to the previous menu or status.

(AUDIO)

Audio channels setup, to select audio mode; Left, Right , Stereo, Mono.

TV/SAT

Receiver switches between TV and Satellite receive mode.

(INFORMATION)

To display channel status or various program information of current service.

EPG(Electronic Program Guide)

Display the Programs guide on screen when available.

Displays the Main Menu on the screen, or return to the previous menu or status.

EXIT

Cancel the user selection and return to the viewing mode from a menu.

To select menu option, or to updated on entry.

<,> KEY

To adjust volume level, or to move cursor left or right in the menu.

^,v KEY

To change channels, or to move cursor up or down in the menu.

P+/P-

To move up the cursor to the next or previous page in the menu or channel list.

PIP(RED KEY)

To start the PIP function

Teletext(GREEN KEY)

Shows teletext information of the current channel supports.

Subtitle(YELLOW KEY)

Subtitle Display.

(BLUE KEY)

Multi channels display. You can choice the desire channel use <,> ^,v and press ok confirm.

UHF

In case your TV is connected through RF Modulator (UHF), select output channel number between CH21 and CH69 with up and down key.

(FIND)

Use to prompt find channels sort by character.

TIMER

Press timer key you can setup up the Standby time.

P/N

Press P/N button to switch the display mode among "By source", "By native TV ", "480i", "480P”,”576i”,”576p",”720P” and "1080i".

SAT

Display satellite list.

FAV(FAVORITE)

To set receiver to the favorite server mode, display the favorite channel.

)

Archive

Press this button to enter the Record Manager menu directly.

TMS(Time Shift)

Press this button to display Time Shift info bar.

Play

To play the MP3, JPEG, or Record files.

Stop

To stop the Time Shift, recording, or MP3/JPEG player.

PAUSE

Used to select the freeze function. Press once to freeze the screen picture.

Record

To start recording.

To start Fast Backward function.

To start Fast Forward function.

To start Slow Backward function.

To start Slow Forward function

5. Front panel

POWER KEY: To switch the receiver power on/stand by MENU KEYTo enter into the main menu. <,> KEY: To adjust volume level, or to move cursor left or right in the menu. ^, v KEY : To change channels, or to move cursor up or down in the menu OK KEY: To see TV/Radio channel list, or to confirm in the menu. Remote Sensor: Detects infrared signal from remote control unit Display: Indicates operating status of receiver POWER Indicator: while the receiver is power on and at standby mode. Signal Indicator: When receiving signal is strong, the signal indicator is lighted. Card Slot: One slot CA Interface for Conax, Insert the smart card chip side up! Common Interface: One socket for Conditional Access Modules CAM (optional).

6. Rear Panel

Please refer to the diagram above for all possible connections of your receiver Do not connect the unit to the mains socket until all other connections have been made and checked. Your configuration can vary depending on model

AERIAL OUT: This enables the connection of another receiver. AERIAL IN : This port is to connect the coaxial cable from terrestrial antenna or cable network. TV : This is used to connect your TV through SCART cable. CVBS : This RCA connector is used to connect any external video. AUDIO R/L : These RCA connectors are used to connect any external audio amp or system. COAXIAL: Digital Audio interface, connect to AV amplifier S/PDIF input terminal. HDMI: Audio and Video output socket for TV set with HDMI Input Jack only. USB: USB 2.0 Host, connect to USB hard disk, or flash disk RS 232C SERIAL PORT: This is used to connect your receiver to a computer through a serial cable.

7. Connecting Your System

There are three ways to connect the receiver to your existing TV system. We recommend using one of the following cases for the best result:

1. If you have a high definition television set, you should use a HDMI cable for best result, Plug one end of the cable into the HDMI socket on the receiver, and the other end into the matching socket on your television. In this case, you do not have to make audio connections because the HDMI connector can output stereo audio or Dolby digital audio.

2. Connect one end of SCART cable to the TV (SCART) jack on the back of the receiver and the other end to a SCART jack on your TV.

3. Connect one end of RCA cable to the RCA jack on the back of the receiver and the other end to a

RCA jack on your TV.

Finally connect the coaxial cable from the LNB to the LNB IN jack on the receiver.

With External Audio / Hi-Fi System

To connect any external Audio Hi-Fi system, the receiver has been provided with two RCA connectors at the back of the receiver marked with Audio L and R. Connect an RCA stereo cable from the AUDIO L, R jacks on the back of the receiver to the LINE, AUX, SPARE OR EXTRA input jacks on your Hi-Fi System.

8. Basic Operations

8.1 Turn on STB

First, press the [Device’s Main Power] to turn on the unit. When the STB is first used, there will play the first channel from the default Channel List. If the STB is not first used, STB will play the same channel as last time before turning off.

Frequently Asked Question

Q: The power of my STB has been turned on and not

in Standby mode, but the TV screen showed nothing:

A: Make sure the TV set has been set to the correct video input (not the TV channels). For example, if you have connected the unit with the Video1 input of the TV set, the TV set has to be switched to Video1.

Q: The power of my STB has been turn on and not in

Standby mode, but the TV screen showed nothing except one box with “No Signal” image.

A: That means the channel, which you select, is no

signal. It could be several causes:

1 The channel which you select is not in your

allocate satellite. The simply solution is to change channel.

2 The signal of current TV channel is too weak. You

can try to change channel to other strong signal channels. If the problems still exist, please consult your local dealer or other professionals for technical service.

3 You use the Dual LNB, and you need Modify LNB

Type

8.2 Power

8.5 Number

In full screen, use number key and press [OK] on the Remote Control Unit to change channel.

8.6 Mute

1 Press [MUTE] key to mute the sound and the

screen will show up mute OSD.

2 Press [MUTE] key again to restore sound.

8.7 Pause

1 In playing mode, press [Pause] key, the picture will

be paused, but the sound of the channel will still continues.

2 Press [PLAY] key again, the screen’s picture will

skip over to the current playing picture, and the sound of the channel will corresponding playing.

8.8 Recall

Press [RETURN] key will directly switch to the previous channel that you played before current channel.

8.9 Favorite

1 In full screen, press [FAV] key, it will display a

window of “Favorite list” on the left of the screen, which you can watch like below.

1 Press [Power] Key can enter the Standby state 2 In Standby state, press [Power] Key again can call

back the unit and go on play the previous channel

3 User can also disconnect the device’s main power

to end the Standby state.

8.3 Channel Up/Channel Down

In full screen, press [CH+/CH-] to change channel.

2 In the window of " Favorite list ", you can move

highlight by press [Channel Up/Channel Down] key to select favorite Channels.

3 In the window of ” Favorite list ", you can press

[Left/Right] key to select favorite groups Pressing

8.4 Volume Up/Volume Down-

In full screen, press [VOL+/VOL-] to adjust volume. 9

[P-/P+] keys can implement the “Page up/Page down” function

4 Press [Exit] key to exit the current window.

Frequently Asked Question

Q: Why the screen displays “No Favorite Channel”,

after pressing [Favorite] key?

A: It is because that you haven’t set any channels as

“favorite channel”. Please refer to Favorite

8.10 Audio

8.11 Information

In full screen, press [INFO] key can open information screen, in the window shows the parameters of current channel.

8.12 EPG

1 The STB has an Electronic Program Guide (EPG)

to help you navigate channels through all the possible viewing options. The EPG supplies information such as channel listings and starting and ending times for all available channels. Press [EPG] key to display EPG screen.

1 In full screen, press [AUDIO] key can open the

“Audio” window on the screen.

2 You can modify the audio track by press [Channel

Up / Channel Down] key and modify the audio mode by press [Volume Up / Volume Down] key.

3 Mode: Left/Right/Stereo/Mono

2 Press [green]key in each item can see more now

detail information and press[menu]key to cancel.

3 Press [yellow] key in each item can see more next

detail information and press [menu] key to cancel.

4 Press [Red] key in EPG menu can display”

Schedule" Menu. In "Schedule” menu, you can press [Up/Down] to select “Event”. Press [left / right] key to day change.

8.13 TV/RADIO

In TV mode, pressing [TV/RADIO] key can switch to Radio mode. In Radio mode, press [TV/RADIO] key to switch to TV mode.

8.14 Channel List

1 In full screen, press [OK] key can enter “Channel

List”.

5 Press [Green] key in schedule menu can open

timer menu. User can save a timer as he want.

2 Press [Left/Right] or [red] key to change satellite or favorite. which you can watch like below.

3 Press [Blue] key can open the “Sort” window like

below. There are four kinds of sorting ways. You can press [Channel Up/Channel Down] key to move highlight and press [OK] key to confirm you selection.

6 In EPG menu, press [Exit] to close EPG screen.

4 The five kinds of sorting way are:



Default: Sorting by scanning result.

 FTA/$: Sort channel through free and

scramble sequence. Free channel will in the front of channel list and scramble channel will at the rear of channel list

 Lock: Accumulated all locked channels and

list in the last of TV Channel List.

 Name (A-Z): Sorting in Alphabetical Order,

ignore “$” symbol.

 Name (Z-A): Sorting in Alphabetical Order,

ignore “$” Symbol.

 HD/SD: Sort channel by HD and SD

sequence, HD channels will at front of channel list and SD channel will at rear of channel list.

5 Press [Up/Down] key to move highlight and press [OK] key to play the highlighted channel. 6 Press [Page Up/Down] key to page up and page Down. 7 Press [Exit] key to exit the channel list.

8.15 Sleep

1 This function can set sleep timer. When you set a

sleep timer and the time arrive, the system will enter to standby automatically.

2 Pressing [SLEEP] key, it will switch the mode

between Sleep Timer Off /10/30/60/90/120 minutes.

8.16 Page Up/Page Down

In Channel list, press [Page+/Page-] key can page up and page down the channel list.

8.17 TEXT

1 Press [green] key in full screen, you can open

teletext page on the channel which has teletext information.

2 If the channel has no teletext information, it will

show “No Teletext Data” on the screen.

8.18 Subtitle

1 Press [Yellow] key in full screen, you can switch

subtitle on or off.

8.19 Find

Press[Find]

window like above.

Up/Channel Down/Volume Up/Volume Down]key to move highlight and press[OK]key to input the selected symbol or letter into the dialogue.

After input each character, the program list on the left will search the channel according your input, and list the matched channel.

Move highlight to OK and press [OK] key can close Find window and you can select channel from the channels list

directly.

key in full screen can open the “Find”

You can press[Channel

8.20 Zoom

1 The [ZOOM] key allows you to magnify a certain

area on the images

2 Press [ZOOM] key again, the image will enlarge

rotate as x1, x2, x4, x6, x8, x12, x16.

3 In “x2 ~ x16” image, using [Up/ Down/ Up/ Down]

keys to move the image center area you want to see.

4 In zoom mode, press [Exit] to close “Zoom”

window.

8.21 TV/RCA

1 Press [TV/RCA] key can switch between TV

mode and STB mode

8.22 Menu

1 Press [MENU] key can open the menu, exit the

current menu to last menu or close the window.

8.23 Video Format

1 Press [P/N]

playback for 1st, it will show the current system outputting video resolution, continuously press this key, system will switch its outputting video resolution by sequence “by source-> by native TV -> 480i-> 480P-> 576i-> 576p-> 720P-> 1080i”.

(white)

key under Full Screen

9. Channel

When you press [Menu] key to enter menu, there will display the picture like below:

1 Press [Up/Down] key to select menu pages among

Edit Channel, Installation, System , Tools , Game and USB.

2 Press [OK] or [Right] key to enter the “Edit

Channel”. If Menu Lock is “On”, it will display an dialogue for user to key in password. The default Password is “0000”.

3 Press [Up/ Down] key to select menu items among

TV Channel and Radio Channel

4 Press [Left] key or [Menu] key to go back to main

menu.

9.1 TV Channel List

8.24 Exit

1 Press [EXIT] key can exit the current menu to last

menu or close the window.

When you enter to “Channel List” menu, there will display the screen like below.

You can move highlight by press[Channel Up/Channel Down]key to preview the

current highlighted program in the right side preview window

2 You can press [Page Up/Page Down] key to

implement the Page Up/Page Down function.

3 You can use [Volume Up/Volume Down] key to

switch “Program Group”.

You can press[Menu]or[Exit]keys to enter full screen playing mode.

Press color key can implement the corresponding function in “Channel Manager”.

9.1.1 Group

In “TV Channel Manager” menu, press [Green] key can make a “skip mark” in the right side of the highlighted channel.

After save and exit “TV Channel Manager” menu, the channel will be skip while user change channel in the full screen.

9.1.3 Edit

Press [Yellow] key, it will show input password dialog. If the password is correct, it will open the window like below. The default password is

0000.

Press [Red] key can open the “Group” window like above

You can press [Up/Down] key to move highlight and press [OK] key to select group.

Press [Red] key or [Menu] key to close “Group” List.

9.1.2 Skip

9.1.3.1 Delete

In this menu, press [Red] key can make a delete mark in the right side of the highlighted channel.

Press [Red] key again can cancel the deleted mark on the current channel.

When exit the menu, it will ask you whether to save the change. Select “Yes” to save the change.

In “Name” item, press[OK]key can display the keypad, and you can edit new name here for selected channel.

In “Video PID”, “Audio PID” and “PCR PID” items, you can use the number key directly to modify corresponding parameters of the items.

After modification, move highlight to “Save” item and press[OK]key, can save

parameter and exit “Edit” mode. Otherwise, move highlight to [Exit]item and press[OK]key can exit “Edit” mode and won’t save any modification.

9.1.3.2 Edit

If you press[Yellow] key, it will show the window like below:

Press [Up/Down] or input numerals key to move the channel

Press [OK] key to put the channel to the target place.

When exit the menu, it will ask you whether to save the change. Select “Yes” to save the change.

9.1.4 Sort

1 On the “Name” item, press[OK]key can

display keypad to edit the name of selected channel.

2 On the “Video PID”, “Audio PID” and “PCR

PID” items, you can input numerals to modify the according item’s value.

3 After modification, move highlight to “Save”

item and press[OK]key can save the modified value and exit “Edit” mode. Otherwise, move highlight to [Exit]item and press[OK]key can exit “Edit” mode and won’t save any modification.

9.1.3.3 Lock

Press [Blue] key can make a “lock mark” in the right side of the highlighted channel. After save and exit the menu, STB will request you to input the password while you want to watch the locked channel.

9.1.3.4 Move

In this menu, press [White] key can make a moving mark in the right side of the

Press [Blue] key can open the “Sort” window like above. There are five kinds of sorting ways. You can press[Channel Up/Channel Down]key to move highlight and press[OK]key to confirm you selection

The five kinds of sorting way are:

 Default: Sorting by scanning result.  Name (A-Z): Sorting in Alphabetical

Order, ignore “$” symbol.

 Name (Z-A): Sorting in Alphabetical

Order, ignore “$” symbol.

 FTA: Sort channel by free and scramble

sequence. Free channel will at front of channel list and scramble channel will at rear of channel list

 Lock: Accumulated all locked channels

and list in the last of TV Channel List.

 HD/SD: Sort channel by HD and SD

sequence, HD channels will at front of

highlighted channel.

channel list and SD channel will at rear of channel list.

9.1.5 Favorite

1 Press [White]key can open the “Favorite”

window like above

2 You can move highlight between 8 favorite

groups by press[Channel Up/Channel

Up/Channel Down/Volume Up/Volume Down]key to move highlight and press[OK]key to input the selected symbol or letter into the dialogue.

After input each character, the program list on the left will search the channel according your input, and list the matched channel.

Move highlight to “OK” and press [OK] key can close “Find” window and you can select channel from the channels list directly.

9.2 Radio Channel List

Basically, the operation of “Radio Channel List” is same as “TV Channel List”, but there is one point different: In “Radio Channel List” mode, there is no video information, so it will always display Radio’s logo in the right side preview window.

Down]key and press[OK]key to make a favorite mark in the right side of the selected Favorite group.

Press[OK]key on the marked Favorite group can cancel the exist favorite mark.

After marking, press[Exit]key can back to “TV Channel List” , there will show a favorite mark beside the marked channel.

9.1.6 Find

Press[Find] key can open the “Find”

window like above. You can press[Channel

10. Terrestrial Installation (THD-3000)

Press [OK] key to enter the selected item.

1 There are two modes. You can scan channel by channel or by frequency”. 2 When scan band is UHF and region is “France”, the range of Ch No. is from 21 to 69. When scan band is VHF and region is “France”, the range of Ch No. is from 1 to 9. (it’s according to region) 3 When you complete your modification, press [red] key enter scan menu and then press [OK] key, then it will begin to scan.

4 Press [Exit] key to exit the scanning.

1. You can select the Bandwidth according different country.

2. You can set the Tuner Power ON/OFF.

3. Press [OK] key on Terrestrial Installation item to enter the following menu.

 LCN LCN Mode can control the channel whether sort by the sequence information in the streams. The option is: On / Off. You can press [Left/Right] key to select each mode circularly.

4. Scan Mode. 17

11. Cable Installation (CHD-3000)

Press [OK] button to enter the selected item. 1, You can select the Scan Mode, Manual Scan or Blind

Scan. 2, You can input the Frequency by use the numeric button of the RCU. 3, You can input the Second Frequency by use the numeric button of the RCU, if you set the Scan Mode to Blind Scan. 4, You can input the Symbol Rate by use the numeric button of the RCU. 5, You can select the QAM value among 16QAM,32QAM,64QAM,128QAM and 256QAM. 6, You can turn ON or OFF the NIT Search, if you set the Scan Mode to Manual Scan. 7, When you complete your modification, press OK button on Search item to enter Scan menu and then press OK button, it will begin to scan.

10.1 Common Interface(optional)

We provide two CI slots for user to use. Using different CAM & cards provided by different CAS operator, user can view many type or scrambled channels.

We provide this menu to display the detail information of the CAM & cards inserted in the slots. User can check all this information according to the help message at the bottom of each menu.

Note: All information showed in this menu and submenu is abstract from CAM & card. In case something is wrong, it may be the problem of CAM or card.

When you insert the CAM correctly at any time, a message will show in the screen to tell you

that which CAM has been detected by the receiver and is available now.

10.2 CA Setting

Note: All information showed in this menu and

submenu are coming from inserted card. In case if anything is wrong, it could be card problem. After inserting the card correctly at any time, a message-box will show on the screen with message about detecting the card, in "card info" menu all available information will be displayed.

12. System

We provide two CA slots for user to use. Receiver has build in smart card module with CONAX system. By using cards in this system provided by operators, it is possible to watch many scrambled channels coded in this system. This menu shows detailed information about cord inserted into cord reader module. It allows inserted according to help messages visible on the bottom of the screen.

When you enter to “System” menu, you will see the screen like below:

In “System” menu:

Press[Channel Up/Channel Down]key to select menu items among Language, TV System, Local Time setting, Timer, Channel Play Type, Startup Channel OSD Setting, Parental Lock.

Press[OK]key to enter the selected item.

12.1 Language

When you enter to “Language” menu, you will see the screen like below:

Subtitle Language: Press [Left/Right] key can select subtitle language.

6 Teletext: You can set teletext language. If the

streams have this language you can see the teletext in language you set.

7 Press [Exit] key to draw back from “Language”

menu.

12.2 TV System

When you enter to “TV System” menu, you will see the screen like below:

1 Language: press [Volume Up/ Volume Down] key

to select menu languages, the selections of languages include: English, French, German, Russian, Arabic, Portuguese, Turkish, Spanish, Polish and Italian.

2 First Audio: Some channels have more than one

audio language for choosing; by this function you can set the first audio for this channel. If the playing channel has the same audio as the “First Audio” you set, system will play this audio language as default. If the channel hasn’t the suited audio language, then the system will compare automatically with second audio language. The selections of audio languages include: English, French, German, Russian, Arabic, Portuguese, Turkish, Spanish, Polish and Italian.

3 Second Audio: If the channel has no correspond

audio with “First Audio” but have corresponded audio with “Second Audio”, system will play the second audio language as default. If no audio language corresponds with the “Second Audio”, then the default language of current channel will be played automatically. The selections of audio languages include: English, French, German, Russian, Arabic, Portuguese, Turkish, Spanish, Polish and Italian.

EPG: Press [Left/Right] key can select EPG language.

1 Display Mode is for switching the system

outputting video resolution. Move highlight on it and press left or right key, it will switch video resolution circularly by the sequence “by source<-> by native TV<-> 480i<-> 480P<-> 576i<-> 576p<-> 720P<-> 1080i”. This effect is equal to press V.Format Key under Full Screen and their last setting saving will be efficient for each others. By Source means system will set the video output resolution according to the program it’s playing, different resolution programs switching perhaps will makes TV screen flickering. By Native TV means system will be according to the HDMI TV’s max supported resolution to set its resolution, if system is not connected to a HMDI TV, it will set resolution to be default

2 Aspect Mode is for switching the screen aspect

ratio mode. Now we provide below options: 4:3 PS / 4:3 LB / 16:9/Auto. You can press [Left/Right] key to select each mode circularly. 16:9 will provide user pillar box mode it means user use 16:9 TV to display but need to see a 4:3 full display

picture. System will force press wide screen picture to be narrow and there’re black band on

left and right site. Auto means system won’t do any aspect ration translation, 16:9 picture source

will be good display on a 16:9 TV but will be too narrow on a 4:3 TV, and 4:3 picture source will be

too wide

in a 16:9 TV but will be good

display in a 4:3 TV.

Video Output: Press [Left/Right] to select RGB or YUV.

4 RF system and RF channel are for user to set the

TV RF modulator output signal VHF/UHF channel and TV system mode. If your TV is too old to supports CVBS/YPbPr/HDMI, you can use TV RF cable to connect STB’s TV RF output port to TV Antenna input port.

5 Digital Audio Out is for setting the both SPDIF and

HDMI’s digital audio output mode, it has options LPCM Out, Auto, You can press [Left/Right] Key to select each mode circularity. LPCM Out means system will decode no matter AC3 or PCM audio track data to be LPCM, digital audio decoder or HDMI TV will get LPCM digital audio data. Auto means system will detect which the connected HDMI TV can decode and then output that data. If HDMI TV can decode AC3, system just output RAW data, if HDMI TV can decode LPCM only, system will just decode AC3 or LPCM to be LPCM and then output.

Press [Exit] key to draw back from “TV System” menu.

12.3 Local Time Setting

When you enter to “Local Time Setting” menu, you will see the screen like below:

 GMT Usage: This item is use for open the

usage of GMT. You can press [Volume Up / Volume Down] keys to switch “On/Off”.

 The “GMT Offset” item is valid only when the

setting of “GMT Usage” is “Yes”. You can press [Volume Up / Volume Down] keys to switch “GMT Offset” value, and the range is “-12:00 ~ +12:00”, increase each half hour progressively.

 You can press [Left/Right] to control Summer

time on or off.



“Date” and “Time” items are valid only when the setting of “GMT Usage” is “No”. You can press [Volume Up / Volume Down] keys to moving highlight and use number keys to input directly.

If the current channel provides the correct time information, you will see the current time while you enter “Time” menu. If the channel doesn’t provide time information, you have to input the date and time information manually.

 Press [Exit]key to draw back from “Local

Time Setting” Menu.

12.4 Timer

Press [enter] key to open timer menu.  Current time information will display on the

first column; if the current time is incorrect, please modify the time information in “Time” item.

 Timer Number: You can press [Volume Up /

Volume Down] keys to set Timer number, and there are 8 timers in total.

 Timer Mode: There are several modes for

Timer to setting, include Off, Once, Daily, Weekly, Monthly and Yearly.

 Timer Service: There are two options for

“Timer Service”, include “TV Channel” and “Radio Channel” (timer setting for channel change and Wakeup/Sleep) and "Record Radio" and "Record TV" (Timer setting for Record the TV or Radio program to USB Hard Disk) and Message (reminding message).

 When you select “Channel” (timer setting for

channel change and Wakeup/Sleep) option in “Timer Service”, the screen will display like

automatically switch to the channel you want and start to play.

 Duration: After you set a time for

“Duration” item, once the time’s up, the system will automatically switch to standby mode. If you want not work this function, set the duration is 00:00.

 When you select “Message” (reminding

message) option in “Timer Service”, the screen will display like below:

below:

 Channel: press [OK] key to enter

channel list and select channel that you want to setting.

 Date: use number keys to input your

wakeup date.

 On Time: use number keys to input your

wakeup time. Once the time’s up, no matter what the system is in standby mode or in playing mode, the system will

 Wakeup Message: press [Volume Up /

Volume Down] key to select reminding message as Birthday, Anniversary and General.

 Date, you can use number key to input your

wakeup date.

 On Time: use number keys to input your

wakeup time. Once the time’s up, no matter what the system is in standby mode or in playing mode, the system will automatically pop a reminding message.

 The message will always display on the

screen, you can press [Exit] key to close it.

 Press [Exit]key to exit the current menu.

12.5 Startup Channel

Press [OK] key to enter “Startup Channel” menu, and you will see the screen like below:

For Example: If you select “Free”, in full screen play, all scrambled channels will be skipped when you change channels by use [Channel up/Channel Down] key.

Press [Exit] to draw back from “Channel

 If the setting of “Boot on Channel” is

“On”, it means the following two items can be work. If the setting is “Off”, it means the “Boot on Channel” function can’t work.

 In the “Mode” item, you can set the

“Startup Channel” as “TV channel” mode or “Radio channel” mode.

 In “Startup Channel” menu, you can

press [OK] key to open the channel list, and select the channel that you want it to startup, press [OK] key again to

Setup” Menu.

12.7 OSD Setting

When you input to “OSD Setting” menu, you will see a screen like below:

Subtitle Display: You can press [Volume Up/Volume Down] key to select “On” or “Off”.

confirm.

12.6 Channel Play type

Press [OK] key to enter “Channel Play Type” menu, and you can select the “playing channels” as “Free”, “Scrambled” or “All”.

If the current channel has subtitle information, it will be showed up while this function is “On”. If this function is “Off”, there won’t show up subtitle information even if the current channel has subtitle information.

OSD Timeout: When you switch channels in full screen, there will show up some information about current channel on the lower of the screen. And regarding to the duration of these information show up on the screen, you can press [Volume Up/Volume Down] key to set the time. The range of the duration is “1 second ~ 10seconds”.

OSD Position: control display position of the info bar in full screen mode. You can choose “bottom” or “top”.

OSD Transparency: Besides the setting of “OSD Menu Style”, you also can set the transparency of OSD. You can press [Volume Up/Volume Down] key to select the values. There are 5 levels of transparency, 10%, 20%, 30%, and 40% and “NO” (means no transparency function).

Auto Power Down: The receiver will enter standby mode automatically if no any operate during the time which you set.

Load OSD Setting Default: If you are not satisfy with your setting, you can move highlight to this item and press [OK] key to reset parameters as default value.

Press [Exit] key to draw back from the “OSD Setting” menu.

12.8 Parental Lock

You can set a password for anyone who wishes to operate in the “Installation” menu. And you can also set the password for the lock channels. (How to set the lock channel please refer to LOCK) Here will show you how to setting and how to revising the password.

In “Parental Lock” function, press [OK] key, there will pop an dialogue for you to input the password. When you input the correct password, you will see a screen like below:

Menu Lock determining that when user wish to enter “Installation” menu, whether have to input Password or not. If the setting of “Menu Lock” is “Yes” which means user have to key in password, set “No” means unlock.

Channel Lock determining that when user wish to play the lock channels, whether have to input the password or not. If the setting is “Yes”, play the channels with lock mark will show up a dialogue on the screen and ask for the password. If the setting of “Channel Lock ”is “No”, the Lock function will invalid.

New Password is used for revising password; you can input the new password in this item by using number keys directly. After you filled in 4 digital numbers, the highlight will auto skip to Confirm Password and ask you to input the new password again. If the password is correct, the screen will show up a message of “Saving Data, Please Wait…”. After finish saving and draw back to “System Setup” menu, the revising is complete.

Press [Exit] key to draw back from the “Parental Lock” menu.

13. Tools

When you enter to “Tools” menu, you will see a screen like below:

13.2 Default Setting

In “Tools” menu:

1 Press [Up/Down] key to select menu pages among

Information, Satellite Guide, Default Setting, Software Upgrade, Upgrade By USB, Backup to USB

Press [OK] key to enter the selected item.

13.1 Information

13.2.1 Default Setting:

When you press [OK] key In the “Default Setting” item:

There will pop a dialogue for you to enter

When you enter to “Information” menu, you will see a screen like above. The screen displays :MODEL ID,S/W VERSION,H/W VERSION,LOADER VERSION,LATEST UPDATE,STB SN,STB ID,VFD Version.

Press [Exit] key to draw back to “Tools” menu.

the password, and the default password is “0000”.

After you input the correct password, there will show a warning message to inquiry you “The operation will load default and erase all the channels that user added, continue?”.

If you select “OK” option, the all revised parameters of the receiver will reset to default value. Please carefully to using this function.

In step 1 and step 2, press[Exit]key can draw back from this item and without saving.

13.2.2 Delete All Channel:

13.3 Software Upgrade

When you press [OK] key in the “Delete All Channel” item, it will pop a dialogue ask you whether confirm to delete all channel. If you select “OK”, all the channel will be deleted.

13.2.3 LED Power In Standby

n"VFD Power in"menu,there are two options, “On” and “Off”, for your selection. If the setting is “On”,when you press [power] key to standby,the VFD will display the time and "STANDBY", If the setting is “Off”,when you press (power)key to

Upgrade by RS232:

1. We offer the functions for user to connecting receiver (Master) to the other receiver (Slave) via serial interface.

2. Connect master receiver to slave receiver via serial interface. Enter “Software Upgrade” menu in master receiver and

standby,the VFD will not display the time and "STANDBY".

press[Volume Up/Volume Down]keys to switch upgrade mode.

Upgrade modes include: code / Program

Press [Exit] to draw back from "Default Setting" menu.

List / user back /video back / radioback / defaultdb / code + program/ Default DB + User DB..

13.2.4 Scart Loop

This Scart Loop item have two options "ON" and "OFF", if setting is ON, will enable "SCART

3. Moving highlight to “Start” on master reeciver and press[OK]key to start upgrade.

LOOP" and "TUNER LOOP" function when receiver is in standby, if setting is OFF, will disable "SCART LOOP" and "TUNER LOOP"

4. Turn on slave receiver and it needn’t operate any setting.

function when receiver is in standby.

5. Press [Exit]key to draw back.

13.4 Upgrade By USB

In this menu you can upgrade the software from USB conveniently, press ' OK ' button to enter.

In this menu you can select the Upgrade Mode among Program+Code, Code, User Back, Video Back, Radio Back and Default DB, and you can select the appropriate upgrade file on "Upgrade File" item. After you select the "Upgrade Mode" and "Upgrade File", press ' OK ' button on "Start" item, the receiver can upgrade automaticlly. NOTE: You must put the upgrade file on the /ROOT DIRECTORY of the USB storage.

13.5 Backup to USB

In this menu ,you can dump the software to the USB equipment

1 In "Backup file",you can press [OK] key to edit the

file name.

2 In "Backup to USB",you can press [OK] to start

dumping software .

13.6 Network Local Setting(Optional)

In this menu you may assign a dynamic IP address to the digital receiver. To do so, select the DHCP Enable. If you have a static IP address, unselect the DHCP Enable, then the IP Address, Subnet Mask, Gateway, DNS Preferred and DNS Alternate options become enabled. You have to set these options according to your IP address.

13.7 Upgrade By Network(Optional)

In this menu you can Upgrade by network, you should assign the Protocol(HTTP or FTP), URL Type, URL address, User name and

Password,then the receiver will connect to the server and upgrad automatically.

14. Game

When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello.

Basic operation statement:

14.1 Tetris

 Moving highlight to “Setup” and press

[Volume Up/Volume Down] key to select the game level (speed).

 Moving highlight to “Start” and press [OK]

key to start the game.

 Moving highlight to [Cancel]keys and

press [OK]key to draw back from the game.

 Start on the game:

 [Volume Up/Volume Down] Move

shape left or right

 “Channel Up” Rotate clockwise  “Channel Down” Faster drop  [OK] Pause/Play the game  [Exit] Quit game and draw back to

“Game” menu.

14.2 Snake

 Moving highlight to “Setup” and press

[Volume Up/Volume Down] key to select the game level (speed).

 Moving highlight to “Start” and press [OK]

key to start the game.

 Moving highlight to[Cancel]keys and

press [OK]key to draw back from the game.

 Start on the game:

 [Volume Up/Volume Down/Channel

 [OK] Pause/Play game  [Exit] Quit game and draw back to

14.3 Othello

 Moving highlight to “Setup” and press

[Volume Up/Volume Down] keys to select the game level (degree of difficulty).

 Moving highlight to “Start” and press

[OK] key to start the game.

 Moving highlight to [Cancel] keys and

press [OK] key to draw back from the game.

 Start on the game:

 [Volume Up/Volume Down/Channel

 [OK] set chessman.  [Exit] Quit game and draw back to

UP/Channel Down] use these arrow keys to guide the snake.

“Game” menu.

UP/Channel Down] use these arrow keys to guide chessman.

“Game” menu.

15. USB

if you enter to the "USB" Menu, you will see the picture like the below:

Note: If no USB Hard Disk insert to the receiver this menu is not available.

15.1 Record Manager

 To play the file with full screen, please

press "OK" Button.

15.2 Storage Information

Press "OK" button to enter the HDD Information menu like the below picture, in this menu you can see the details information about the HDD.

15.3 HDD format

In this menu you can see the record files, and you can edit it:  To Lock the file, please press "Green"

Button.

 To Delete the file, please press "Blue"

Button.

If you want to format the HDD, press "yellow" button to enter Format menu, then select the File System between the "FAT" and the "NTFS", Press "OK" Button to confirm.

 To Rename the file, please press "Red"

Button.

 To play the file with small window, please

press "

" Button.

Note: If you format the HDD, all the files include MP3, JPEG and the record files will be deleted from the HDD.

If you want change the path for recording files and timeshift files, press “blue” button to enter the DVR Set menu, then press OK button to set the path on current select disc.

15.4 PVR Setting

ON: Means when you press the " " Button to record the program, it will merging the Timeshift files and the record files. OFF: Means when you record the program, it just start when you press " " button, not include the Timeshift files.

15.5 File List

In this menu you can check the files and folders of the USB storage, and you can view JPEG files.

 Time Shift: ON: Enable the Time Shift function. OFF: Disable the Time Shift function.  Record as Scrambled NO: Means you can play the record file (Free) without the CI module and the card. YES: Means when you play the record file (Scrambled) you must insert the CI module and the smart card.  Timeshift to Record

In this menu you can manage the play list.

Press 'OK' button on the selected files to play the single file.

You can preview the picture at the top right corner if the scroll bar is on the picture files (JPG, BMP), and show the logo when at MP3 file.

Move scroll bar when press up/down key, page up or down by page key. Go into sub-directory when press ok key in the file directory, play the selected file when scroll bar is on the file, automatic return USB menu after play is over.

5, Green key:

To sort the file list by press green button.

6, White key:

To setting the Repeat mode of the MP3 player.

Hot key operation:

Green key: 1, 0 key:

All the MP3 files in current directory are added into MP3 play list by 0 key, and screen display “Add to Play List”, display will disappear after one second.

2, 1 key:

All the Image files in current directory are added into Image play list by 1 key, and screen display “Add to Play List”, display will disappear after one second.

3, FAV key:

put the file selected by scroll bar to play list

7, Yellow Key:

Show one operation window:” please select play list type” by Red key, you can select Music or Image play by Left/Right Arrow key, open the selected Play list if press OK key. There will display “This type of play list does not exist” if there are no any file.

Music play operation

If you select music, and MP3 play list menu is activated, please see the below picture:

when press FAV Key, in the meanwhile show “Add to Play List”, display disappear after about one seconds, the file will be added into MP3 play list if it is one MP3 file, to Image play file for one Image file.

4, Red key:

In this menu to setting JPEG player.

Red Key:

Play the 1st music file by press Red Key. Play the file selected by scroll bar when press OK key.

Yellow Key:

Delete the file selected by scroll bar by Yellow key.

Blue Key:

Delete all the file by blue Key, but there is one remind “are you sure” before practical operation, if select Yes, all file will be deleted, and close the Play list window.

Red Key:

Start to browse image if press RED key, or play the selected image if press OK key, return to USB File list if play is over, or return by press

After begin to play MP3, it will show the MP3 play window. Press “PAUSE” button to pause.. Press “PLAY” button to play. Press “STOP” button to stop and time return to 00:00. Press “PREV” button to jump to the beginning of file list if play is over 3 seconds; or jump to previous file if play less than 3 seconds. Press “NEXT” button to go to the next file. Press “FORWARD” button to forward 20S. Press “BACKWARD” butto to back 20S. Jump to beginning or end if less than 20S to the

Exit Key.

Yellow Key:

Delete selected image if press Yellow Key.

Blue Key:

Press Blue Key, will delete all image files in play list, but system will remind you “ Are you sure? ” before practical operation, if you select Yes, all file will be deleted and Play list window will be closed.

8, Blue key:

Go to multi-picture view mode for picture by press blue button.

beginning or end of music file. Return to USB file List when play is over or press Exit key.

Image view operation

Please see the below image operation menu if Image function is selected.

15.6 USB Speed Test

In "USB Speed Test" Menu you can see the Standard speed and your USB harddisk speed, according this information you can know what operation your disk can support.

16.2 Time Shift

If you connect the USB HDD, and enable the Time Shift function in the menu "Main Menu/ Record/ PVR Setting/Time Shift", It will start the Time Shift function automatically after you switch the program, and when you press the "Tms" button the Time Shift info bar will displayed as the following picture:

15.7 Remove USB Device

Press [OK] key on this item, you can remove the USB safely.

16. New Features

16.1 Equalizer

When you listen the Radio program, it will display the music spectrum graphic on TV Screen.



You can press " " button to pause the video, and can save the picture to flash by press " P+ " button when the video is paused.



You can press " " or " " button to Fast Backward or Fast Forward.



You can press " " or " " button to Slow Backward or Slow Forward.



Press “left" or "right" button to jump to different position, then press "OK" button to confirm.



Press " " button to exit the playback.

16.3 Record

If you connect the USB HDD. You can press " " button to start record function, as following picture:

 Press " " button to display the record info

bar when you recording.

 Press " " button again to setting the

record time.



You can press " " button to pause the video, and can save the picture to flash by press " P+ " button when the video is paused.

 You can press " " or " " button to Fast

Backward or Fast Forward.



You can press " " or " " button to Slow Backward or Slow Forward.



Press “left" or "right" button to jump to different position, then press "OK" button to confirm.

 Press " " button to stop the recording.

Symptom

17. Trouble Shooting

If you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling authorized service agent.

Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidate your warranty.

Possible cause

Settings you made in the menu have not change

No signal The level of signal is weak

Receiver is on but no picture or sound except the following messages (NO TV program) Receiver not responding to remote control unit

Poor picture Quality The level of Signal strength is low No sound The cable is connected incorrectly

No display on the LED Display Panel No picture on the screen Receiver is in Standby mode

The receiver lost power before being able to enter into standby mode Some of the Settings saved by user can be deleted partly or fully

Antenna is out of order The cable from the Antenna or Terrestrial is incorrectly Connected (short circuit or open circuit) The position of antenna is aligned incorrectly

Channel is not available Channel is scramble

RCU batteries are dead or inserted incorrectly The RCU is pointing toward wrong direction

The Volume level is low Muting function is active

The power cord is not plugged in correctly.

RCA Jack or cable is not connected firmly to the video output port of television Incorrect channel or video output is selected on television Brightness level of your TV set is incorrectly defined

Tuner/Front

end (THD

3000)

Tuner/Front

-end (CHD

3000)

720*480P/I, 720*576P/I, 1280*720p,1920*1080i

A/V & DATA INPUT/OUTPUT

18. Specifications

SYSTEM RESOURCES

Main Processor Flash Memory DDR SDRAM

396M Hz based CPU 32M Bits 1024Mbits

Tuner Type Aerial In Connector

DVB-T IEC Type Female

Aerial out Connector IEC Type made Input Frequency 170-230MHz CH5-CH12, 470-860MHz

CH21-CH69

RF Input Level Antenna power output

Demodulation Number of carriers Constellation Guard Inter Val

Tuner Type Input Connector Loop Through Frequency Range Signal Level

Bandwidth Demodulation Constellations Input Symbol Rate

"-70dBm to -8dBm" 5V/50mA max COFDM 2K/8K 1705/6817 QPSK, 16QAM, 64QAM 1/4, 1/8, 1/16, 1/32

DVB-C (optional) F-type/IEC-Type, Connector, Female F-type, Connector, Male 47-862MHZ "-20dBMV to +20dBMV" 8MHZ QAM 8,16,32,64,128,256

1.5 - 7 Ms/s

POWER SUPPLY

Input Voltage Power Consumption

Free Voltage (100~250V AC, 50/60Hz) 15W MAX

MPEG TS A/V Decoding

Transport Stream Input Rate Aspect Radio Video Decoding

MPEG-2, H.264 Max.120Mbit/s 4:3, 16:9, Letter Box MPEG-2, MP@ML, MPEG-4 part 10/H264

Video Resolution Audio Decoding Audio Mode Sampling Rate

MEPG-1 layer I/II, Mpeg2 layerII, Dolby digital Left / Right / Stereo/ Mono 32, 44.1 and 48KHz

TV-SCART

RCA A/V

S/PDIF RS-232C

Video CVBS/RGB output Audio L/R output Video CVBS output Audio L/R output Coaxial, Digital Audio or Dolby Digital Bit Stream

Output Transfer rate 115.2Kbps

PHYSICAL SPECIFICATION

9 pin D-sub Type

USB

One USB 2.0 slot Compatible for VER1.2

HDMI

Type A

Size[W*H*D] Net Weight Operation Temperature Storage Temperature Storage Humidity

220mm*153mm*49mm

1.2KG 0℃~+45℃

-10℃~+70℃ 5%~95% RH (Non-Condensing)

Synaps CHD-3000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual