Page 1
ASSEMBLY INSTRUCTIONS 13090
Room Divider
Thanks for choosing our product. Please kindly check parts listed below and read this manual
carefully, then assemble them step by step. Please feel free to contact us for any questions.
Attention
1. Check the parts list and check if the parts are completed.If any accessories are missing,
please kindly send us messages to let us know the number of missing part regarding to the part
list of instructions. We will send replacement to you asap.
2. If there is any damage, please send clear photos about damaged part to us as attachment,
we will check and offer you best solution soon.
3. We are concerned about each customer's experience, please feel free to contact u if you
have any problems, issues or concerns, we will provide effective solutions.
1
Page 2
Parts List
A B C D
X6 X6 X6X6
K
X2
Support Pole Support Pole
E G
Connector
F
X2
Washer Rubber Pad
X12 X3X6
Room Divider Assembly Instruction 13090
STEP1
A
Connect Pole
H
X2
M6*35mm Screw Fabric
I J
X12
Adjustable Foot
Steel Pole
B
* Connect Support Pole [A]
to Support Pole [B].
C
A
I
* Connect Connect Pole [C] to
Support Pole [A] and Support
Pole [B] with Rubber [G] and
Screw [I].
* Assembled by Phillips Screwdriver (Note:
this phillips screwdriver is not included in the
package.)
G C
2
Page 3
STEP2
A
B
C
J
J
I
I
GC
I
* Insert the fabric [J] to Connect Pole [C],then connect Support Pole [A] & [B] to
Connect Pole [C] with Rubber [G] and Screw [I].
* Assembled by Phillips Screwdriver (Note: this phillips
screwdriver is not included in the package.)
STEP3
K
D
F
* Connect Support Foot [D] to Support Pole [K], then insert the Support Pole [K]
to Support Pole [B] with Washer [F] and Screw [H].
3
H
Page 4
* Connect the every screen by Connector [E].
Loading...