Page 1
STEP 3
In order to prevent product tip over, please follow the instruction below to secure the unit to the wall.
Hardware List Qty
1SET
Assembly Instruction
1/4”
DRILL BIT
Recommended Maximum Weight
*NOTE:For one set
WALL
CABLE TIE
Approx. 20 minutes
Recomm. 1 Person
No Tools Required
Turn-N-Tube 5 Tier Corner
Display Rack Multipurpose Shelving Unit
10
10
10
10
10
*Unit in Pound(lbs)
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
Page 2
No Hardware List Qty No QtyParts List
Top/Shelf Panel
Long Pole
1
Top Cap
2
Round Leg
3
*All the hardware quantity are for two sets.
24pcs
8pcs
8pcs
A 8pcs
Bottom Panel
B 2pcs
Hardware List Qty
2SETS
STEP 1
1.1 Attach Long Pole (1), Top Cap (2) and
Round Leg (3) to Bottom Panel (B).
1.2 Attach Shelf Panel (A) and tigthen Long
Pole (1) , as shown:
STEP 2
Attach Top Panel (A) and tighten Top Cap (2),
as shown:
1/4”
DRILL BIT
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
A
finished surface
A
finished surface
A
finished surface
finished
B
surface
*NOTE: For one set
STEP 1.4
STEP 1.3
STEP 1.2
STEP 1.1
Long Pole - 12pcs
Top Cap - 1pc
Round Leg - 4pcs
A
A
A
A
B
Top Cap - 3pcs
*NOTE: For one set
A
FINISHED
SURFACE
B
FINISHED
SURFACE
Loading...