Page 1
STEP 2 STEP 3
Fix Top Cap (2) on top of the Shelf Panel (A),
as shown.
2
A
In order to prevent product tip over, please follow the
instruction below to secure the unit to the wall.
HARDWARE PARTS LIST QTY
WALL PLUG EYELET SCREW
WALL PLUG
1/4’’
DRILL BIT
CABLE TIE
EYELET SCREW
1 SET
WALL
WALL
1
CABLE TIE
Assembly Instruction
Turn-N-Tube 5-Tier Multipurpose Shelf
Display Rack
Approx. 15 minutes
Recomm. 1 Person
Recommended Maximum Weight
15
15
15
15
15
*Unit in Pound(lbs)
No Tools Required
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
Page 2
No Hardware List Qty No QtyParts List
1
2
Long Pole
Top Cap
16pcs
4pcs
Shelf Panel
A 5pcs
STEP 1
1.1 Attach Round Leg (3) to the bottom of Shelf Panel (A) and tighten to Long Pole (1).
Attach another Shelf Panel (A) and repeat the steps, as shown.
1.2
3
Round Leg
4pcs
2
STEP 1.4
A
1
A
A
STEP 1.3
1
1
A
A
STEP 1.2
1
1
1
1
1
A
1
1
A
1
1
1
A
1
3
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
STEP 1.1
1
1
1
1
A
3
Loading...