Page 1
PRODUCT MANUAL
ATTENTION! PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS DEVICE
PRODUCT MANUAL
NOTICE:
If your package is missing parts or you are having issues with assembly, please call us
directly. Our customer service team will address any questions or concerns you may have.
Have this manual open and ready for reference.
SAFETY
To reduce risk of injury when assembling & using the bed, follow these precautions:
• Read all of these instructions before assembling and using your salon bed.
• It is helpful to have 2 people assemble and turn the bed upright after assembling.
• Do not over-extend the bed(0~150kg), creating the risk of falls or tipping the
bed, and its occupant over, resulting in injury
OTHER ITEMS YOU WILL NEED (not included)
•Hand Tools:Wrench
Sturdy box
Page 2
PARTS & FEATURES
Parts Item Picture
Parts name
Quatity Parts Item Picture
Parts name
Quatity
A
Seat
cushion
1 E
Leg
Support
1
B
Backrest
1 F
Armrest
2
C1
Short
spring Leg
1
C2
Long
spring Leg
1
D
Towel
holder
1
A
B
C1
D
E
F
H
I
J
C
2
Page 3
Installation instruction
FIRST：Assemble backrest(B)to
seat cushion(A)
1.Putting seat cushion（A）upside
down,
2. remove 4pcs Hexagon Flange
screws which already fixed on the seat
cushion (A)
3.Install metal joining parts on the
backrest（B）to be matched with seat
cushion 4 hole
4.Using 4pcs given Hexagon Flange
screws to tighten by wrench, please see
diagram besides
SECOND：Assemble legs to seat
cushion(A)and backrest(B)
1.remove 6pcs Hexagon Flange screws
which already fixed on the seat
cushion(A) seat cushion
2.Put two legs(C1+C2) to seat
cushion (A) and make sure holes on
legs matched with each holes on
seat cushion(A),install (C1) the
Short spring Leg on the side
which installed backrest.
3.Using 6pcs given Hexagon flange
screws to tighten by wrench, please
see diagram besides
A
B
A
C2
C1
C2
C1
3
Page 4
THIRD：Install Leg Support(E)to
the middle of legs
1.remove the 2pc Hexagon socket
screws from the leg support wo sides
(E).
2.insert leg support(E)to the middle of
legs(C)，make sure holes toward each
holes
3.Using 2pcs given Hexagon socket
screws to tighten by wrench, please see
diagram besides
FOURTH：Assemble towel
holder(D)to the seat cushion(A)
1.remove the 2pc Hexagon flange
screws from seat cushion(A)
2.Install towel holder(D)to the
seat cushion by 2pcs give Hexagon
flange screws
E
D
A
4
Page 5
FIFTH：Assemble armrest(F) to the
backrest(B)and seat cushion(A)
1：putting the bed up right
2: Insert two armrests to the holes on
each sides of bed, please follow up the
diagram besides
Function description
Adjustment of backrest and seat
Adjusting the support bar on the two
supports to match the rack, which can
adjust the tilt of the backrest and the
Seat cushion
（ Notice! When moving the
adjustment support rod, it must not
exceed the gear on both sides of the
rack)
F
F
A
B
5
Page 6
Using of towel holder
The Towel holder can hang towels
Tower holder
6
Loading...