Page 1
A B
Chair Back
1 Unit
C D
Seat Mechanism
1 Unit
E F
Left Arm
1 Unit
Chair Seat
1 Unit
Right Arm
1 Unit
Gas Lift
1 Unit
High Back Mesh Chair
Step 1: Insert Casters (H) into Chair Base (G) and insert Gas lift (F) without cover into the hole in the
center of the Base (G) and Foot ring (O).
Step 2: Place Chair Back (A) on a support,non-abrasive surface. Attach arms (D&E) to Back (A) using
M6X25 mm Screws(I) Tighten with Allen Wrench (N).Cover screw holes with Arm Caps (M).
Step 3: Place Chair Seat (B)on a support,non-abrasive surface.Attach Arms (D&E) with Back (A) to
Chair Seat (B) using four washers(L)and four M6x35mm Screws(K) as shown.Tighten with
Allen Wrench (N).
Step 4: Place Seat Mechanism (C)on Chair Seat (B) and align the four holes in the mechanism with
the holes in Chair Seat (B).so the front of the Seat Mechanism (C) faces the FRONT label
on the bottom of the Chair Seat (B) Secure into place four M6X20 mm Screws (J).Tighten
with Allen Wrench (N).
Step 5: Carefully place the assembled chair frame onto the Gas lift(E),aligning the hole in the Seat
Mechanism (C) with the Gas Lift (E) press down on the Chair Seat (B) to secure in place.
F
O
G
H
I
5PCSF
A
E
M I
N
SUPPORT
D
M
I
4PCS
N
M 4PCS
G
Chair Base
1 Unit
I
M6x25mm Screws
4 Units
L M N
Washers
4 Units
H
Casters
5 Units
J
M6x20mm Screws
4 Units
Arm Caps
4 Units
O
Foot Ring
1 Unit
K
M6x35mm Screws
4 Units
Allen Wrench
1 Unit
N
K
L
SUPPORT
275
K 4PCS
N
L 4PCS
4PCS
N
J
SUPPORT
C
D
A
J
N
D
B
E
C
F
O
G
H
A
E
B
C
Loading...