Page 1
INSTALLATION
AND CARE
INSTRUCTIONS
Top Down-Bottom Up Cordless
Honeycomb Shade
PACKAGE CONTENTS
• 2, 3, or 4 mounting brackets, depending on size
• 4–8 screws, depending on size
• 2 rail handles for lifting and lowering shade
INSTALLATION
Inside Mount
Flush inside mount requires 2" depth.
➀ Mark location of brackets and
screw to the window frame. The
brackets should lie 3–4" from each
end of where the shade will be
installed.
➁ Attach the
rail handles to
the bottom and
top rails.
➂ Attach the headrail
to the brackets as
shown. Lower top rail
by 3–4", then attach
headrail to brackets
as shown.
TOOLS REQUIRED
Phillips screw driver, pencil
OPERATING AND CLEANING INSTRUCTIONS
Always use the plastic handle to move the shade up and down.
Avoid touching the fabric.
To clean the shade use a vacuum or feather duster.
Outside Mount
For maximum draft and light control the headrail
should overlap each inside edge of the window by
at least ½".
➀ Mark location of brackets
and screw to the window
frame. The brackets should
lie 3–4" from each end of where
the shade will be installed.
Follow steps 2 and 3 from above.
Loading...