Page 1
Parts Listing
Computer Task Chair
A
Chair Back
1 Unit
C
Seat Mechanism
1 Unit
Adjustable Arms
E
Gas Lift
1 Unit
Telescopic Bellows
G
Aluminum Base
1 Unit
B
Chair Seat
1 Unit
D
2 Units
F
1 Unit
H
Casters
5 Units
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
STOP
A
D
B
K
J
C
I
F
E
Please read all instructions before assembly.
Step 1:
Step 2: Attach the Seat Mechanism (C) to the Chair Seat (B)
Step 3: Attach the Adjustable Arms (D) using M6x25mm
Step 4: Place center hole of Seat Mechanism (C) onto
Step 5: Insert the bar on the Chair Back (A) through the
Step 6: Place Plastic Bumper Stop (L) into the bottom hole
Note: Please see subsequent page for operating instructions.
Insert Casters (H) into Aluminum Base (G). Place
Gas Lift (E) into the center hole of the Aluminum
Base (G) and cover with Bellows (F).
using M6x12mm Screws (J).
Screws (I) and M6 Washers (K).
Gas Lift (E). Press down firmly on Chair Seat (B)
to secure to base.
rear slot of the Seat Mechanism (C), and tighten
the hand tension knob to secure.
of the bar on the Chair Back (A).
I
M5x25mm Screw
8 Units
M6x12mm Screw
K
M6 Washer
8 Units
Plastic Bumper Stop
J
4 Units
L
1 Unit
G
H
WEIGHT CAPACITY: 400 lbs.
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Page 2
Operation Instructions
Mechanism: Arms:
Back Height
Back Posture
Seat Height
Seat Posture
Arm Height
Arm Width
Location:
Right/Rear when Seated
Operation:
Loosen Knob to Adjust
Tilt Forward
Location:
Right/Front when Seated
Operation:
Ensure Seat Posture Lever
is Raised. Lean Back & Pull
Knob Out to Activate. Lean
Back & Push Knob in to Lock
Location:
Right/Rear when Seated
Operation:
Pull Up to Adjust
Push Down to Lock
Seat Depth
Location:
Front/Center when Seated
Operation:
Lift Lever to Activate
Release to Lock
Location:
Right/Center when Seated
Operation:
Lift Lever to Activate
Tilt Tension
Location:
Underneath Seat
Operation:
Turn Clockwise for Less
Tension / Conterclockwise
for More Tension
Location:
Right/Front when Seated
Operation:
Pull Up to Adjust
Push Down to Lock
Synchronized Tilt
Location:
Right Front & Back
when Seated
Operation:
Lift Both Seat Posture &
Back Posture Levers.
Use Tilt Tension Knob
to Adjust
Arm Swivel
Arm Slide
Loading...