Page 1
CARE AND MAINTENANCE
Never use abrasive or acid-based cleaners on the shelf rack.
Clean shelves and rods with a solution of mild detergent and water. Use a soft cloth or sponge to wipe
parts. Rinse and dry thoroughly. Keep surfaces dry and clean for a longer lasting finish.
NOTICE
Please read and understand these instructions before attempting to assemble, operate or install the product.
- Two adults required for a assembly.
- Do not allow children to climb or play in or around the shelves.
- Each shelf holds up to 160 lbs. when items are evenly distributed.
- Assemble on a soft surface, such as carpeting to avoid scratching the finish.
A
C
B
D
Part Description Picture Quantity
A
Shelves
Upper Pole
B
C
（with Joiner）
Spacers
Lower Pole
D
PREPARATION
1.Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents . If any part is missing or damaged, do not attempt to assemble the product.
2.Estimated Assembly Time: Approximately 15 - 20 minutes.
3.Helpful Tools (not included):Rubber Mallet.
4.No Tools Required for Assembly.
(with leveler）
4
4
18
4
36 in W x 14 in D x 54 in H
Page 2
A ssem b l Iy n st r u ct i ons
D
D
Use a pen to mark the height on the 4 Lower Poles (D). Be sure
all poles are marked in the same location.
4
A
A
B
A
2
C
C
D D D
Attach 2 Spacers (C) at the pen marks on the 4 Lower Poles (D).
Keep the arrows on the spacers (C) pointed upwards.
C
5
D
A
B
adju st the le veler
3
Place the Lower Poles (D) through the corner holes of 1 Shelf (A).
Fit the shelf carefully and securely over the Spacers (C).
D
A
The bi gger di amete r
down ward
Corn er hole t op and
bott om diff erenc e
A
6
B
D
Connector
Install the second Shelf (A) following steps 2-3.
7
A
Cloth
Use the rubber mallet to tap the shelves into place for a secure fit.
Use a soft cloth between the shelf & mallet to prevent damage to
the shelf.
Screw the Upper Pole (B) onto the threaded ends of the Lower
Poles (D). Be sure the connection is secure & tight.
8
B
D
Assembly is Complete.
A
Install remaining Shelves (A) following steps 2-3.
Loading...