Symple Stuff GPPX1000 Installation & Assembly

Page 1
Clock Radio with Dual Alarms
Volume/AL1/AL2
Press to adjust volume.
Press to set Alarm 1 or 2.
Radio/Power
Press to power ON.
Press and hold to power OFF.
Short press to switch
between AM and FM.
Press to snooze the alarm after it sounds.
With the radio ON, press repeatedly to set the sleep timer.
PM Indicator Sleep Indicator
Alarm 1 Buzzer/ Radio Indicator
Tuning/Min/Hour
Press to adjust tuning for the radio.
Press to set hours/minutes.
Preset/Clock
Press to cycle through preset radio stations (RADIO ON).
Press and hold to set the clock (RADIO OFF).
Alarm 2 Buzzer/ Radio Indicator
Power
Plug the power cord into a standard power outlet.
Battery Backup
The battery backup is intended for short power outages only. The clock radio’s primary functions cannot run o of the battery backup alone. Requires 2 AAA-size, batteries (not included).
Page 2
Clock / Sleep Timer
Radio
Setting the Clock
1. Press and hold the Preset/Clock button until the
display begins ashing.
2. Press the Hour and Minute buttons to adjust the time. The PM indicator will light when the hour is set in the PM.
3. Press the Preset/Clock button again to nish, or wait for the display to stop ashing.
Setting the Sleep Timer
1. Power the radio and press the Snooze button to adjust the timer ( 90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF ).
2. Once the set sleep time has expired the clock radio will automatically power o.
Alarm
Setting the Alarm
1. In o mode, press the AL1 or AL2 buttons to set Alarm 1 or Alarm 2.
2. The screen will ash and display the time the alarm is set to go o. Press the Hour and Minute buttons to set the desired time. Note the PM indicator.
3. Press the AL1 or AL2 buttons repeatedly to switch between Radio, Buzzer or o. Wait for the display to stop ashing.
4. Once the set alarm time is reached, the alarm will sound. Press the Power button to turn the alarm o until the set alarm time is reached again.
5. To set the other alarm, follow the above steps and choose the alarm not currently set.
Snooze and Alarm Reset
After the alarm sounds:
• Press the Snooze button to delay the alarm for an
additional 9 minutes.
• Press the Power button to turn the alarm o until the
set alarm time is reached again.
OR
Radio Reception
To improve radio reception, adjust the position of the unit.
Tuning the AM or FM Radio
1. Power on the radio and press the Power button again to switch between the AM and FM radio mode.
2. Press the Tuning ± buttons to nd the desired radio frequency.
3. Press the Volume ± buttons to adjust the volume of the radio.
Saving a Station as a Preset
1. With the radio on, tune to your desired frequency, press and hold the Preset/Clock button until the screen ashes.
2. Press the Tuning ± buttons to choose the desired preset station, 1 though 10.
3. Press the Preset/Clock button again to set the frequency to that preset station.
4. The unit will store 10 FM and 10 AM radio station presets. Once set, press the Preset/Clock button to cycle through your preset stations.
Loading...