Symphonic RSMSD125 User Manual

Owner’s Manual

Please read before using this unit.

DVD/CD Player

Owner's Manual

SYMPHONIC

RSMSD125

Supplied Accessory

• Remote control
(NB070UD) with
two AA batteries

Connecting to RF Modulator

If your TV has AUDIO/VIDEO input jacks, see the section
“Connections” on page 6. If not, it is still possible to connect
this unit to your TV by using a STEREO AUDIO/VIDEO RF
Modulator (commercially available.) In this case, follow the

instructions below.

1) Connect the AUDIO/VIDEO output jacks of this unit to the
AUDIO/VIDEO input jacks of your RF Modulator by audio and
video cables.

2) The antenna input jack of your TV may have been already occu­pied. If so, disconnect the RF cable from your TV, then connect
the RF cable to your RF Modulator (usually marked “ANT IN”.)

3) Connect your RF modulator to your TV by another RF cable.

4) Set your RF modulator’s channel 3/4 switch to either 3 or 4,
whichever the TV channel is least used in your area. If your RF
modulator has a Modulator/Antenna switch, set it according to
your RF modulator’s manual.

5) Turn on your TV and choose the same channel as you set the

RF modulator’s channel 3/4 switch to.
For more details, follow the instructions supplied with the RF
Modulator.

Antenna

Cable
Signal

Stereo Audio/Video RF Modulator

(commercially available)

ANT IN

AC 120V

2

Hint

Hint

• The quality of picture may become poor if the unit is connected

to an RF Modulator.

If you need additional operating assistance after

reading this owner’s manual, please call

TOLL FREE : 1-800-605-8610

or visit our web site at http://www.funai-corp.com

•

Audio/Video cables
(WPZ0102TM015/
WPZ0102LTE01/
WPZ0102CAB01)

TO TVCHANNEL VIDEO AUDIO

RL34

Audio/Video

(Supplied)

RF Cable (Not supplied)

3

• Owner’s Manual
(1VMN20430)

(Back of this unit)

L

Y

AUDIO OUT

DIGITAL

AUDIO OUT

COAXIAL

CR/PR

VIDEO

S-VIDEO

CB/PB

R

OUT

1

Cables

COMPONENT

VIDEO OUT

OUT

Antenna in jack

(Back of TV)

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

Table of Contents

Precautions

Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Avoid the Hazards of Electrical Shock and Fire . . . . . . . 4

Moisture Condensation Warning . . . . . . . . . . . . . . . . . . 4

About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Notice for Progressive Scan Outputs . . . . . . . . . . . . . . . 4

Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

■ About the Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unplayable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setup

■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to an Audio System. . . . . . . . . . . . . . . . . . . 7

Rear Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ About the Remote Control . . . . . . . . . . . . . . . . . . . . . 8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing the Batteries for the Remote Control . . . . . . . . 8

Functions

■ Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

■ On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

■ Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 11

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Repeat / Random / Programmed Playback . . . . . . . . 12

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Repeat A-B Playback. . . . . . . . . . . . . . . . . . . . . . . . . . 12

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Programmed Playback. . . . . . . . . . . . . . . . . . . . . . . . . 12

■ Special Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

■ DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

LANGUAGE Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . 14

DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

AUDIO Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

OTHERS Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Reset to the Default Setting

(except for PARENTAL Setting) . . . . . . . . . . . . . . . . . . 17

Information

■ Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . 17

■ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

■ Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

■ Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Precautions

SetupInformation

Functions

Español

Precautions

WARNING

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

Precautions

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

:

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Laser Safety

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECI-

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

BEAM.

FCC WARNING-This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the man­ual. The user could lose the authority to operate this equipment if an unauthorized change or modification
is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA

FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste.

Contact your council for details.

For Customer Use:
Read carefully the information located at the bottom of this unit and enter below the Serial No. Retain this information for
future reference.

Model No.
Serial No. _____________________

_____________________

–2–

EN

IMPORTANT SAFEGUARDS

1) Read Instructions - All the safety and operating instruc­tions should be read before the product is operated.

2) Retain Instructions - The safety and operating instruc­tions should be retained for future reference.

3) Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to.

4) Follow Instructions - All operating and use instructions
should be followed.

5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

6) Attachments - Do not use attachments not recom­mended by the product manufacturer as they may
cause hazards.

7) Water and Moisture - Do not use this product near
water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near
a swimming pool; and the like.

8) Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and seri­ous damage to the product. Use only with a cart,
stand, tripod, bracket, or table recom­mended by the manufacturer, or sold
with the product. Any mounting of the
product should follow the manufac­turer’s instructions, and should use a
mounting accessory recommended
by the manufacturer.

9) A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven sur­faces may cause the product and cart combination to
overturn.

10) Ventilation - Slots and openings in the cabinet are pro­vided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the prod­uct on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.

11) Power Sources - This product should be operated only
from the type of power source indicated on the mark­ing label. If you are not sure of the type of power sup­ply to your home, consult your product dealer or local
power company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.

12) Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way.This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.

13) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
product.

14) Lightning - For added protection for this product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the product due to
lightning and power-line surges.

15) Power lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.

16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.

17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid
of any kind on the product.

18) Servicing - Do not attempt to service this product your­self as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.

19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into

the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by follow-

ing the operating instructions. Adjust only those con-

trols that are covered by the operating instructions

as an improper adjustment of other controls may

result in damage and will often require extensive

work by a qualified technician to restore the product

to its normal operation,
e) If the product has been dropped or damaged in any

way.

f ) When the product exhibits a distinct change in per-

formance - this indicates a need for service.

20) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.

21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.

22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

Precautions

–3–

EN

CD

CD

DVD-V

DVD-V

Installation Location

Symbols Used in This Manual

For safety and optimum performance of this unit:

• Do not stand the unit up vertically. Install the unit in
a horizontal and stable position. Do not place any­thing directly on top of the unit. Do not place the unit
directly on top of the TV.

• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid

Precautions

places. Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes on the sides of the unit. Avoid locations sub­ject to strong vibration or strong magnetic fields.

• Be sure to remove the disc and unplug the AC
power cord from the output before carrying the unit.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.

Moisture Condensation Warning

Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. Do not use this unit at least for 2 hours
until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly
is prohibited.

Notice for Progressive Scan Outputs

Consumers should note that not all high definition televi­sion sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of
picture problems with 525 progressive scan output, it is
recommended that the user switch the connection to the
‘standard definition’ output. If there are questions regard­ing your TV set compatibility with this 525p DVD player,
please contact our customer service center.

The following symbols appear in some head­ings in this manual.

: Description refers to playback of DVD-Video discs.

: Description refers to playback of Audio CDs.

Maintenance

SERVICING

¡Please refer to relevant topics on the “Troubleshooting

Guide” on page 17 before returning the product.

¡If this unit becomes inoperative, do not try to correct

the problem by yourself. There are no user-service­able parts inside. Turn off, unplug the power plug,
and please call our help line mentioned on the front
page to locate an Authorized Service Center.

CLEANING THE CABINET

¡Use a soft cloth slightly moistened with a mild deter-

gent solution. Do not use a solution containing alco­hol, spirits, ammonia or abrasive.

CLEANING DISCS

¡When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not wipe
in a circular motion.

¡Do not use solvents such as benzine, thinner, com-

mercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for ana­log records.

CLEANING THE DISC LENS

¡If this unit still does not perform properly although you

refer to the relevant sections and to “Troubleshooting
Guide” in this Owner’s Manual, the laser optical pickup
unit may be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the laser
optical pickup unit.

DISC HANDLING

¡When you handle a disc hold it by its edge and try not

to touch the surface of the disc.

¡Always store a disc in its protective case when it is

not used.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade­marks of Dolby Laboratories.

–4–

EN

DVD-Video

* 1, 2, 4,

6, 10

* 1, 3, 4, 5,

6, 8, 9, 10

* 1, 3, 4, 5,
6, 7, 9, 10

* 4, 6, 10

* 4, 5, 6

9, 10

or

DVD-RW

DVD-R

DVD+RW

DVD+R

Audio CD

CD-RW

CD-R

Digital video

(MPEG2)

-

-

-

Region code

Mark (logo)

Playable

discs

Recorded

signals

Disc size

Disc types

12 cm

or

8cm

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1

Chapter 2

Chapter 3 Chapter 4

12 cm

or

8cm

Example

Track 1 Track 2 Track 5

Track 6

Track 3 Track 4

Digital audio

About the Discs

is a trademark of DVD Format/Logo Licensing Corporation.

Playable Discs

Precautions

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot

be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s pro-

ducers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not

play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD

recorder. However, depending on the recording status of a disc, the disc may not be played back at all or

normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with the

DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.

*9:

*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it

Unplayable Discs

¡

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be

played back at all or normally (the picture or sound may not be smooth, etc.).

If there is too much recording space left on a disc (the used portion is less than 55 mm across), it may not play

back properly.

correctly.

NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers

¡

On the following disc, the sound MAY NOT be heard.

Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.

¡

The sound recorded on the high density Super Audio CD layer cannot be delivered.

Any other discs without compatibility indications

–5–

EN

Setup

AUDIO OUT

DIGITAL

AUDIO OUT

COAXIAL

L

R

VIDEO

OUT

S-VIDEO

OUT

COMPONENT
VIDEO OUT

CB/PB

Y

CR/PR

LR

AUDIO IN

AUDIO OUT

L

R

VIDEO IN

VIDEO

OUT

S-VIDEO IN

S-VIDEO

OUT

VIDEO

OUT

S-VIDEO

OUT

CB/PB

Y

CR/PR

C

B

Y

C

R

COMPONENT

VIDEO IN

or

P

B

Y

P

R

N

Connections

If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see the section “Connecting to
RF Modulator” on the front page.

Connection to a TV

Method 1

Good pictureBasic Audio

Method 2

Better picture

Method 3

Best picture

TV

S-Video

cable

(commercially

available)

Component Video cables
(commercially available)

Setup

Audio cable

(supplied)

Video

cable

(supplied)

This unit

(Analog) AUDIO OUT VIDEO OUT

Hint

Hint

• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted
due to the copy protection system.

• When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

S-VIDEO OUT

COMPONENT VIDEO OUT

If y

our TV is compatible with 525p (480p) pr

enjo

y that high quality picture;

ogressive scanning and you want to

[DVD]

Set “PROGRESSIVE” to “ON” in the Display menu. P.SCAN light will light up on the front of the unit.
Details are on page 15.

If y

our TV is not compatible with pr

ogressive scanning;

Use this unit in interlace mode. Make sure “PROGRESSIVE”is set to “OFF”and P.SCAN light on the

more than 5 seconds

[Interlace mode]

front of the unit is off. Progressive scanning mode can be set to off either in the Display menu or by
pressing and holding [PLAY BB] on the front of the unit for more than 5 seconds. Detailes are on page 15.

[Progressive scanning mode]

After you have completed connections

• Hit the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input chan­nel (usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual
accompanying your TV.

INPUT MODES FOR COMMON TV BRANDS (Example)

• Listed below are inputs for common brand name TV’s.
Admiral: AUX

Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93
GE: INPUT, TV/VCR, 00, 90, 91, 92, 93
Hitachi: INPUT, AUX
JVC: A/V CHANNEL, INPUT1, SVIDEO,

INPUT2
Kenwood: AUX
LXI-Series: 00
Magnavox: AUX CHANNEL
Panasonic: TV/VIDEO
RCA: INPUT, TV/VCR, 00, 90, 91, 92, 93

Samsung: TV/VIDEO
Sanyo: VIDEO
Sharp: 00
Sony: VIDEO1, VIDEO2, VIDEO3
Toshiba: TV/GAME
Zenith: 00

–6–

STANDBY-O

STOPOPEN/CLOSE PLAY

y

EN

LR

AUDIO OUT

L

R

COAXIAL

DIGITAL

AUDIO OUT

COAXIAL

Connection to an Audio System

Method 1

Stereo system

Analog audio
input jacks

AUDIO

Audio cable

(supplied)

This unit

(Analog)
AUDIO OUT

Connection

Setting

Connecting to Stereo System.

* To complete these settings, refer to pages 14-15.

Hint

Hint

•

Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.

SETUP > AUDIO menu >

DOLBY DIGITAL

PCM

Method 2

Dolby Digital decoder,

MD deck or DAT deck

Digital audio
input jack

Audio Coaxial

Digital cable

(commercially

available)

DIGITAL
AUDIO OUT

Connection

Setting

Connecting to a Dolby Digital decoder
for Dolby Digital audio output.

Connecting to the other equipment (an MD deck or
DAT deck etc.) without Dolby Digital decoder.

* To complete these settings, refer to pages 14-15.

Hint

Hint

•

The audio source on a disc in a Dolby Digital 5.1 channel sur­round format cannot be recorded as digital sound by an MD or
DAT deck.

•

By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital 5.1 channel surround
sound as heard in the movie theaters.

•

Playing a DVD using incorrect settings may generate noise dis­tortion and may also damage the speakers.

SETUP > AUDIO menu >

DOLBY DIGITAL

BITSTREAM

PCM

Setup

Rear Terminals

DIGITAL AUDIO OUT COAXIAL jack

Connect an optional coaxial digital audio
cable here through the coaxial digital audio
input jack of a decoder or audio receiver.

AUDIO OUT jacks

Connect the supplied audio cable (red/white)
here through the audio input jacks of a TV or
other audio equipment.

AUDIO OUT

AUDIO OUT

DIGITAL

COAXIAL

L

R

VIDEO

OUT

Y

CB/PB

VIDEO OUT jack

Connect the supplied video cable
(yellow) here through the TV’s
video input jack.

–7–

CR/PR

COMPONENT

VIDEO OUT

S-VIDEO

OUT

COMPONENT VIDEO OUT jacks

Connect optional component
video cables here through the
component video input jacks of
a television.

S-VIDEO OUT jack

Connect an optional S-Video
cable here through the S-video
input jack of a TV.

EN

About the Remote Control

• To turn the unit on or off. • To turn the unit on or off.

• To display the current disc

mode.

• To display the current disc
mode.

• To open or close the disc
tray.

• To open or close the disc
tray.

• To select chapter or title
directly.

• To select track directly.

• To select camera angles on

a disc.

• To select subtitles on a disc.

• To select audio languages on

a disc.

• To select STEREO,
L-ch or R-ch.

• To repeat between your
chosen point A and B.

• To repeat between your
chosen point A and B.

• To play a chapter or title
repeatedly.

• To play a track or disc
repeatedly.

• To return to the previous
operation in menu.

• To set black level on/off.

• To set virtual surround on/off.

• To arrange the playing

order or play randomly.

• To set virtual surround on/off.

• To call up the Menu

on a disc.

• To call up the Top Menu
on a disc.

• To magnify part of a picture.
(x2/x4)

• To return to the previous
operation in menu.

• To search chapter, title or time.

• To set or search the

markers.

• To search track.

• To search time.

• To set or search the

markers.

• To clear the markers.

• To cancel the point for A-B

repeat.

• To cancel the point for A-B
repeat.

• To clear the markers.

• To remove status number

in program input.

• To clear the numbers
entered incorrectly.

• To clear the numbers
entered incorrectly.

• To search forward/backward
through a disc.

• To begin slow forward

/reverse playback during
the pause mode.

• To search forward/backward
through a disc.

• To advance playback
one frame at a time.

• To pause disc playback.

• To pause disc playback.

• To stop playback. • To stop playback.

• To skip chapters. • To skip tracks.

• To begin disc playback. • To begin disc playback.

• To call up the DVD setup

menu.

• To call up the DVD setup
menu.

• To move the cursor and
determine its position.

• To move the cursor and
determine its position.

STANDBY–ON

DISPLAY

MENU

TOP MENU

ZOOM

SUBTITLE

MODE

ANGLE

SEARCH

MODE

REPEAT

A-B

AUDIO

CLEAR

123

456

789

0

+1 0

PAUSE

PLAY

STOP

SETUP

DVD-V

DVD-V

CD

CD

Button

(Alphabetical order)

Disc

ENTER

RETURN

REV FWD

OPEN/CLOSE

SKIP

STANDBY–ON

AUDIO

SUBTITLE

ANGLE

REPEAT

CLEAR

A-B

PAUSE

SETUP

TOP MENU

MENU

ENTER

MODE

ZOOM RETURN

SLOW

SKIP

OPEN/ CLOSE

DISPLAY

SEARCH

MODE

123

456

789

0 +10

PLAY

REV FWD

STOP

2

1

3

IR
SENSOR

P.SCAN

STANDBY-ONSTOPOPEN/CLOSE PLAY

y

Remote Control

Setup

Installing the Batteries
for the Remote Control

Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.

Keep in mind the following when
using the remote control:

•

Make sure that there is no obstacle
between the remote control and the
remote sensor on the unit.

• The maximum operable ranges
from the unit are as follows.

- Beeline: approx. 23 feet (7m)

- Either side of the center:

- Above: approx. 16 feet (5m)

- Below: approx. 10 feet (3m)

approx. 16 feet (5m) within 30°

within 15°

within 30°

–8–

EN

DVD-V

DVD-V

CDCDDVD-V

DVD-V

DVD-V

DVD-VCDCD

DVD-V

DVD-V

PLAY

Functions

STOP

STANDBY–ON

OPEN/CLOSE

E

1

1

CDCDDVD-V

DVD-V

CDCDDVD-V

DVD-V

Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.

Resume ON

DVD-V

DVD-V

x2 x4

Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and
any other equipments which are con­nected to this unit. Make sure the TV
and audio receiver (commercially avail­able) are set to the correct channel.

P.SCAN

STANDBY-ONSTOPOPEN/CLOSE PLAY

IR
SENSOR

y

1

1

3

3

To start
playback

2

2

Insert a disc with
label facing up.

To stop

4

4

playback

1

1

3

3

4

4

STANDBY–ON

DISPLAY

AUDIO

123

SUBTITLE

456

ANGLE

789

REPEAT

CLEAR

A-B

PAUSE

SLOW

PLAY

REV FWD

STOP

SETUP

TOP MENU

SEARCH

MODE

0 +10

DVD menu

Some discs contain menus which allow you to customize
DVD playback. Press [KK/ LL/ ss/ BB] to select an item, then
press [ENTER] (or [PLAY BB]).

Calling Up a Menu Screen during Playback

• Hit [MENU] to call up the DVD menu.

• Hit [TOP MENU] to call up the title menu.

Hint

Hint

• Menu operations may vary depending on the disc. Refer to the

manual accompanying the disc for more details.

Resume

2

2

1133441

P.SCAN (Progressive Scan) light

Lights up when the “PROGRESSIVE”

OPEN/CLOSE

SKIP

MENU

is “ON”. Details are on page 15.

Hint

Hint

1

1

•

A “prohibited icon” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this unit.

• Some DVDs may start playback from title 2 or 3 due
to specific programs.

• During the playback of a two-layered disc, pictures may stop
for a moment. This happens while the 1st layer is being
switched to the 2nd layer. This is not a malfunction.

TIP:

You can change the On-Screen language in “PLAYER MENU”
setting. (Refer to page 14.)

Fast Forward/Reverse Search

Press [FWD gg] or [REV hh] repeatedly dur­ing playback to select the required forward or
reverse speed.
To continue playback, hit [PLAY B].

Hint

Hint

•

For DVDs, fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).

• For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).

Slow Forward/Slow Reverse

1

Lights up
when power
is on.

Functions

Hit [STOP CC]. Resume mes­sage will appear on the TV
screen.

Hit
resume from the point at which
playback was stopped.

Hint

Hint

• To cancel resume, hit [STOP CC] one more time during the stop

mode.

• The resume information will be kept even when the power is turned
off.

Paused and Step-by-Step Playback

Hit [PAUSE FF] during playback.
To continue playback, hit

The disc goes forward by one frame each time [PAUSE FF]
is hit during the pause mode.
To continue playback, hit [PLAY B].

Hint

Hint

• On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pic-
tures in the pause mode are blurred. (Refer to pages 14-15.)

[PLAY BB], playback will

[PLAY B].

Press [FWD gg] or [REV hh] repeatedly dur­ing the pause mode to select the required for­ward or reverse speed.
To continue playback, hit [PLAY B].

Hint

Hint

• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).

• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the
slow playback mode are blurred. (Refer to pages 14-15.)

Zoom

Hit [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.

Press [KK/ LL/ ss/ BB] to slide the zoomed picture across the
screen.
To exit zoom function, hit [ZOOM] repeatedly to select OFF.

Hint

Hint

• Zooming function does not work while the disc menu is showing up.

• x4 zoom is not available on some discs.

• The picture may be distorted when you press

[REV hh] repeatedly in the zoom mode.

• It may take several seconds to slide the zoomed picture.

[PAUSEkk] or

–9–

EN

On-Screen Display

DVD-V

DVD-VCDCD

4/12 0:03:21 - 0:02:15

T

4/12 0:13:45 - 0:45:40

T

11/16 0:00:00 - 0:03:30

1/3 0:00:00 - 1:23:45

TL1

DISPLAY

DISPLAY

DISPLAY

DISPLAY

DISPLAY

DISPLAY

DISPLAY

You can check the information about the current disc by hitting [DISPLAY] on the remote control.

1

1

2

2

3

3

Functions

Angle icon, appears only when avail­able on the DVD

Current playback status

Remaining time of the current chapter

Elapsed time of the current chapter

CH(Chapter):
Current chapter number / Total chapters

Remaining time of the current title

Elapsed time of the current title

TT(Title):
Current title number / Total titles

Hint

Layer numbers, appears only when
playing a two-layered Disc
L0: Layer 0 is playing
L1: Layer 1 is playing

Current repeat setting appears only
when the repeat setting is active

C: Chapter repeat / T: Title repeat /

A B: A-B repeat

BIT RATE: The amount of audio and
video data currently being read

Hint

• When you are playing a disc in PROGRAM or RANDOM mode,

Current playback status

1

1

2

2

3

3

PROGRAM (or RANDOM) will be displayed instead of .

Remaining time of the current track
Elapsed time of the current track
TR(Track):

Current track number / Total tracks

ALL:
Current track number / Total tracks

Current repeat setting appears only
when the repeat setting is active

T: Track repeat
A: All Tracks repeat

A B: A-B repeat
Remaining time of the entire disc
Elapsed time of the entire disc

2

2

4

4

–10–

EN

Search Function

CDCDDVD-V

DVD-V

1:29:00

TOTAL

1:29:00

TOTAL

SEARCH

MODE

PLAY

CDCDDVD-V

DVD-V

SEARCH

MODE

PLAY

CD

CD

/29

/29

DVD-V

DVD-V

/12

/12

123

456

789

0

+1 0

SEARCH

MODE

SEARCH

MODE

TR 1 TR 2 TR 3 TR 4

Current Track
(TR)

SKIP

SKIP

CH 1 CH 2 CH 3 CH 4

Current Chapter

(CH)

or

SKIP

TT 1 TT2 TT3 TT4

Current Title
(TT)

SKIP

SKIP

SKIP

SKIP

SKIP

Track Search

Using [SEARCH

Using [SEARCH

1

1

2

2

Within 30 seconds.

• For the disc with less than 10 tracks, hit

the track number directly.

• For discs with more than 10 but less

than 99 tracks, to play single-digit track,
hit [0] first, then the track number (e.g.
for track 3, hit [0], [3]). To play a double­digit track, hit the track number.

Using [SKIP

Using [SKIP

1

1

PLAY

HH

HH

MODE]

MODE]

GG

,

]

GG

,

]

Title / Chapter Search

Using [SEARCH

Using [SEARCH

1

1

Hit once for the chapter search.
Hit twice for the title search.

2

123

2

456

789

0

+1 0

Within 30 seconds.

Using [SKIP

Using [SKIP

1

1

PLAY

HH

HH

MODE]

MODE]

,

,

GG

GG

Time Search

1

1

Hit repeatedly until the
Time Search display
appears.

123

2

2

456

789

0

Within 30 seconds.

Hint

Hint

]

]

• When there is no need to enter a number,
“0” appears automatically.

For example, “0 : 0-:--” appears in the
Time Search display if the total time of the
title or track is less than 10 minutes.

[CLEAR] to erase the incorrect input at

• Hit
step 2).

Hint

Hint

• [+10] button can also bring the Track Search

display, except for the disc with less than 10
tracks. For such a disc, track search can be
done by just hitting the track number.

Marker Setup

This feature allows you to assign a specific
point on a disc to be called back later.

o set a marker

TTo set a marker

1

1

PLAY

SEARCH

2

2

3

3

MODE

ENTERENTER

or

Hit repeatedly until the
marker display
appears.

(If the disc has no chapters)

Hint

Hint

• Depending on the disc being played, this
function can also be performed by directly
entering the desired chapter number with
the Number buttons. Refer to the manual
accompanying the disc.

o return to the marker

TTo return to the marker

later

later

1

1

Hit repeatedly until
the marker display
appears.

2

2

or

3

3

ENTERENTER

at the desired marker

•Playback will restart from the specific point
which you set.

–11–

o e

xit the marker displayy

TTo e

xit the marker displa

1

1

RETURN

Hint

Hint

• Opening the disc tray or turning off the
power will erase all markers.

• Selecting “AC” at step 2) in the section “To
set a marker” will also erase all markers.

• To clear a marker, select the marker to be
cleared at step 2) in the section “To return
to the marker later,” and then hit

[CLEAR].

Functions

EN

Repeat / Random / Programmed Playback

DVD-V

DVD-V

CDCDDVD-V

DVD-V

CDCDDVD-V

DVD-V

CD

CD

CD

CD

A-

CD

CD

MODE

CD-DA TOTAL 0:00:00

ENTER

TOTAL 1: 03: 30

1/4 2/3

1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50

Repeat Playback Programmed PlaybackRepeat A-B Playback

Repeat function is available only during
playback.

1

1

PLAY

REPEAT

Each time you hit [REPEAT], repeat
function changes as example below.

CHAPTER

TITLE

OFF

TRACK

Functions

ALL

OFF

Hint

Hint

• Repeat setting will be cleared when mov­ing to another title, chapter, or track.

• Repeat playback may not function with
some discs or during repeat A-B playback.

(current chapter repeat)

(current title repeat)

off)

(repeat

(current track repeat)

(entire disc repeat)

(repeat

off)

1

1

PLAY

A-B

at your desired starting point (A)

2

2

A-B

A-B

at your desired end point (B)

• Point B should be in the same title or

track as point A.

Hint

Hint

• To exit the sequence, hit [A-B] so that

OFF appears.

• To cancel Point A, hit

• This function does not work in the other

repeat modes.

[CLEAR].

Random Playback

This function shuffles the playing
order of tracks instead of playback
in the sequence.

1

1

STOP

Hit twice

2

2

PLAY

Hint

Hint

• To repeat the current track in the random
selections, hit

“ TRACK” appears during playback.

• To repeat the entire random selections, hit

[REPEAT] repeatedly until “ ALL”
appears during playback.

RANDOM

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

--no indication--

PLAY

.

<Example: CD>

[REPEAT] repeatedly until

You may determine the order in which
tracks will play.

1

1

STOP

MODE

Hit once.

2

2

or

ENTERENTER

3

3

PLAY

Hint

Hint

• Hit [CLEAR] at step 2) to erase the most

recently entered track.

• To erase all programmed tracks at once,
select “ALL CLEAR’’ and hit
step 2).

• While a program is being played back,
[STOP CC] works as follows;

⇒

Hit [STOPCC] and [PLAY BB] next, so
that the programmed playback restarts.

⇒

Hit [STOP CC] twice and [PLAY BB] next,
so that playback restarts from the first
track in the original order. However, your
programmed playback can be restarted
when you follow the above steps. (Your
programs are still stored until either the
disc tray is open or power is turned off.)

• To repeat the current track in the program,
hit

[REPEAT] repeatedly until “ TRACK’’

appears during playback.

• To repeat the entire program, hit
repeatedly until “ ALL’’ appears during
playback.

<Example: CD>

• Up to 99 tracks can be
ordered.

•

If eight or more tracks were in a
program, use
to see all the tracks.

[SKIP HH,GG]

[ENTER] at

[REPEAT]

–12–

EN

Special Settings

DVD-V

DVD-V

CD

CD

DVD-V

DVD-V

1.ENG/6

DVD-V

DVD-V

1 / 8

ANGLE

ON

OFF

DVD-V

DVD-V

CDCDDVD-V

DVD-V

1.ENG/6

Subtitle Language

This unit allows you to select a subtitle
language (if available) during DVD play­back.

1

1

PLAY

SUB TITLE

Each time you hit [SUBTITLE], subtitle
language changes as example below.

ENG

FRE

(English subtitles)

(French subtitles)

...

OFF

(no subtitles)

To set subtitle ON/OFF

1

1

PLAY

SUB TITLE

2

2

Hint

Hint

• If your language is not shown after press-

[AUDIO] or [SUBTITLE] several times,

ing
the disc may not have that language.
However, some discs allow audio language
or subtitle language setting on the disc
menu. (Operation varies depending on the
disc, so refer to the manual along with the
disc.)

• When “NOT AVAILABLE” appears on the
TV screen, it means no subtitle is recorded
on the scene.

• If you choose a language that has three-let­ter-language code, the code will be dis­played every time you change the subtitle
language setting. If you choose any other
languages, ‘---’ will be displayed instead.
(Refer to page 18.)

OFF

Audio Language

This unit allows you to select an audio
language (if multiple languages are
available on disc) during DVD playback.

1

1

PLAY

AUDIO

Each time you hit [

1.ENG Dolby D 3/2.1ch 48k/ 3

AUDIO]

, audio

language changes as example below.

ENG

SPA

(English audio)

(Spanish audio)

...

FRE

(French audio)

Camera Angles

Some DVD discs may
contain scenes which have
been shot simultaneously
from various angles. You can change
the camera angle if the ( ) icon
appears on the screen. If the “ANGLE
ICON” setting is “OFF” in the OTHERS
menu, the ( ) icon will not appear.
(Refer to pages 14-16.)

1

1

PLAY

Black Level Setting

Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.

1

1

PLAY

MODE

Stereo Sound Mode

This unit allows you to select a sound
mode during CD playback.

1

1

PLAY

AUDIO

Each time you hit [

STEREO

AUDIO]

, sound

mode changes as example below.

STEREO

(right and left channels
are active)

L-ch

R-ch

(left channel is active)

(right channel is active)

Virtual Surround

You can enjoy stereophonic virtual
world on your existing 2 channel stereo
system.

1

1

PLAY

MODE

Hit twice

(once for CD)

2

2

ENTERENTER

1: Natural effect.
2: Emphasized effect.
OFF: No effects (original sound).

3

3

RETURN

Hint

Hint

For CD playback only

• Virtual Surround will not be effective if the
sound mode is set to something other than
STEREO. Refer to “Stereo Sound Mode”.

1

Functions

2

2

ENTERENTER

ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.

3

3

RETURN

OFF

–13–

EN

SETUP

QUICK
CUSTOM
INITIALIZE

AUDIO

ORIGINAL
ENGLISH
FRENCH

SUBTITLE

OFF
ENGLISH
FRENCH

DISC MENU

ENGLISH
FRENCH
SPANISH

PLAYER MENU

ENGLISH
FRANCAIS
ESPAÑOL

DVD Setup

UICK SETUP Menuu

QQUICK SETUP Men

You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from the
QUICK SETUP menu quickly.

1

1

STOP

SETUP

2

2

or

<SETUP MENU>

Confirm that “QUICK” is selected.

SETUP

QUICK
CUSTOM
INITIALIZE

You can change the settings of the unit.

QUICK

•

1

1

STOP

Functions

<SETUP MENU>

SETUP

QUICK
CUSTOM
INITIALIZE

LANGUAGE menu

SETUP LANGUAGE

AUDIO
SUBTITLE
DISC MENU
PLAYER MENU

Select the desired item.

CUST

CUST

OM Menuu

OM Men

ENTERENTER

SETUP QUICK

PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL

•

Refer to the sections “PLAYER MENU”, “TV ASPECT”

“PROGRESSIVE”

ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM

ENTERENTER

or “DOLBY DIGITAL” on page 14 or 15.

A

P14 Step 5)

B

P15 Step 5)

B

P15 Step 5)

C

P15 Step 5)

,

on pages 14-16 indicates DVD Setup menus also accessible from the QUICK SETUP menu.

3

3

or

Select the desired item.

SETUP CUSTOM

LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS

OTHERS menu

SETUP OTHERS

ANGLE ICON
AUTO POWER OFFONON

ORIGINAL
OFF
ENGLISH
ENGLISH

SETUP

DISPLAY menu

SETUP DISPLAY

TV ASPECT
STILL MODE
PROGRESSIVE

4:3 LETTER BOX
AUTO
OFF

2

2

Select “CUSTOM”.

AUDIO menu

SETUP AUDIO

DRC
DOWN SAMPLING
DOLBY DIGITAL

or

ON
ON
BITSTREAM

ENTERENTER

PARENTAL menu

SETUP PARENTAL

PASSWORD
Please enter a 4-digit password.

ENTERENTER

page 14

LANGUAGE Setting

A

A

page 15

Follow steps 1) to 3) in the “CUSTOM Menu” section above.

Select the desired item.

4

4

LANGUAGE menu

SETUP LANGUAGE

AUDIO
SUBTITLE
DISC MENU
PLAYER MENU

or

ORIGINAL
OFF
ENGLISH
ENGLISH

ENTERENTER

5

5

AUDIO ∗∗1 ∗∗2
(Default: ORIGINAL)

Sets the audio language.

SUBTITLE:∗∗1 ∗∗2
(Default: OFF)

Sets the subtitle language.

DISC MENU:∗∗1
(Default: ENGLISH)

Sets the language in DVD
menu.

PLAYER MENU:
(Default: ENGLISH)

Sets the language for the
On-Screen Display.

B

page 15

Select the desired language.

or

QUICK

–14–

SETUP

page 16

E

C

page 16

ENTERENTER

D

6 To exit the menu.

6

Hint

Hint

∗1

• Language options are not available
with some discs.

• If OTHER is selected in the AUDIO,
SUBTITLE or DISC MENU screen,
press four-digit number to enter the
code for the desired language. (Refer
to the language code list on page 18.)

• Only the languages supported by the
disc can be selected.

∗2

• Language setting for Audio and
Subtitle are not available with some
discs. Then hit

[SUBTITLE]. Details are on page 13.

[AUDIO] and

EN

B

TV ASPECT

4:3 LETTERBOX

STILL MODE

AUTO

PROGRESSIVE OFF

STILL MODE

AUTO
FIELD
FRAME

SETUP

ENTERENTER

ENTERENTER

ENTERENTER

ENTERENTER

SETUP DISPLAY

TV ASPECT
STILL MODE
PROGRESSIVE

4:3 LETTER BOX
AUTO
OFF

DRC ON
DOWN SAMPLING

ON

DOLBY DIGITAL BITSTREAM

ON
ON

PCM

DRC ON
DOWN SAMPLING

ON

DOLBY DIGITAL BITSTREAM

ON
OFF
BITSTREAM

ENTERENTER

NO
YESNOYES

Confirm again to use progressive scan.

If Picture is good, Select “YES”.

SELECT: K / L

SET:ENTER

Before proceeding…

1. Make sure your TV has progressive scan.

2. Connect with component video cable

NOTE: If there is no picture or picture is

distorted after selecting “YES”,
wait about 15 seconds for auto recovery.

Activate Progressive?

SELECT: K / L SET:ENTER

NO
YES

ENTERENTER

You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.

4

Select the desired item.

4

DISPLAY menu

5

5

PROGRESSIVE:
(Default: OFF)

See Hint to the right.

TV ASPECT
STILL MODE
PROGRESSIVE OFF

6 To confirm the

6

PROGRESSIVE
scanning mode

C

Choose the appropriate audio settings for your equipments. It only affects during the playback of DVD discs. Follow steps 1)
to 3) in the “CUSTOM Menu” section on page 14.

4

4

Select the desired item.

AUDIO menu

SETUP AUDIO

DRC
DOWN SAMPLING
DOLBY DIGITAL

DISPLAY Setting

or

QUICK

ENTERENTER

4:3 LETTERBOX
AUTO
ON

4:3 LETTERBOX

AUTO

AUDIO Setting

or

ON
ON
BITSTREAM

5

5

TV ASPECT:
(Default: 4:3 LETTER BOX)

See Hint to the right.

STILL MODE:
(Default: AUTO)

See Hint to the right.

QUICK

TV ASPECT
STILL MODE
PROGRESSIVE OFF

4:3 LETTERBOX

AUTO

SETUP

Select the
desired

TV ASPECT

4:3

LETTER BOX

4:3

PAN & SCAN

16:9

WIDE

If you do not hit any buttons for 15 seconds,
Progressive Scan will switch to “OFF”.

setting.

or

Select the
desired
setting.

or

If “PROGRESSIVE” is “ON”,
this message appears:

5

5

Select
YES.

or

DRC (Dynamic Range Control): (Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC ON
DOWN SAMPLING
DOLBY DIGITAL BITSTREAM

ON

ENTERENTER

OFF
ON
BITSTREAM

DOWN SAMPLING: (Default: ON)

Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.

ENTERENTER

DOLBY DIGITAL: (Default: BITSTREAM)

QUICK

Set to “BITSTREAM” when the unit is connected to a Dolby Digital receiver.

• BITSTREAM: Outputs a Dolby Digital Signals.

• PCM: Convert the Dolby Digital into PCM (2 channel).

ENTERENTER

–15–

Select
YES.

or

6 To exit the menu

6

(for TV ASPECT
& STILL MODE)

Hint

Hint

TV ASPECT:

• Select “4:3 LETTER BOX”,
so that black bars may
appear on the top and bot­tom of the screen.

• Select “4:3 PAN & SCAN”
for a full height picture with
both sides adjusted.

• Select “16:9 WIDE” if a
wide-screen TV is connect­ed to this unit.

STILL MODE:

• Select “AUTO” usually.

•

If you select AUTO, automati­cally select the best resolution
setting (FRAME or FIELD)
based on the datacharacteris­tics of the pictures. (default).

• If you select “FIELD”, the
picture in the still mode will
be stabilized.

• If you select “FRAME”, the
picture in the still mode will
be highly defined.

•

An individual picture on TV
screen is called as “frame”,
which consists of two sepa­rate images called as “field”.
Some pictures may be blurred
at the AUTO setting instill mode
due to their data characteristics.

PROGRESSIVE:

•

You can set “PROGRESSIVE”
to “OFF” either in the Display
menu or by pressing and hold­ing [PLAY BB] on the front of the
unit for more than 5 seconds.

•

When “PROGRESSIVE” is “ON”,
video signals from VIDEO OUT
and S-VIDEO OUT jacks will be
distorted or not be output at all.

6 To exit the menu

6

Hint

Hint

DRC:

• This function is available

DOWN SAMPLING:

• When playing disc with

• This function is available

SETUP

only on the discs which
are recorded in the Dolby
Digital format.

copyright protection, the
sound will be down sam­pled at 48kHz, even if
you set to OFF.

only on digital outputting
of a disc recorded in
96kHz.

Functions

EN

PARENTAL Setting

ENTERENTER

ENTERENTER

PASSWORD CHANGE

PARENTAL LEVEL ALL

PARENTAL LEVEL
ALL

8
7 [NC-17]
6 [R]

PASSWORD CHANGE

PARENTAL LEVEL ALL

SETUP PARENTAL

PASSWORD

Enter current password.

ANGLE ICON ON
AUTO POWER OFF

ON

ON
OFF

ANGLE ICON ON
AUTO POWER OFF

ON

OFF
ON

SETUP OTHERS

ANGLE ICON
AUTO POWER OFF

ON
ON

ENTERENTER

123

456

789

0

ENTERENTER

ENTERENTER

SETUP

SETUP

ENTERENTER

ENTERENTER

123

456

789

0

123

456

789

0

D

Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not play.)
This feature prevents your children from viewing inappropriate materials.

arentalLeLe

PParental

Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.

vels

vels

Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.

To exit

4

Enter your desired four-

4

digit password (except
for 4737).

5

Select “PARENTAL

5

LEVEL”.

6

Select the

6

desired level.

or

or

7

7

the menu

SETUP

PARENTAL menu

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

If you have set a password already,

or

enter the current four-digit
password.

o Chang

Functions

TTo Chang

e the P

e the P

asswworor

ass

You can change your password for parental controls. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.

4

4

Enter your desired four­digit password (except
for 4737).

CONTROL LEVELS

• ALL: All parental locks are cancelled.

• Level 8: DVD softwares of any grades (adult/general/children) can be played back.

• Levels 7 to 2: Only DVD softwares intended for general use and children can be played

• Level 1: Only DVD softwares intended for children can be played back, with those

TIPS FOR LEVELS

• 7 [NC-17]: No one under 17 admitted

• 6 [R]: Restricted; under 17 requires accompanying parent or adult guardian

• 4 [PG13]: Unsuitable for children under 13

• 3 [PG]: Parental Guidance suggested

• 1 [G]: General Audience

Hint

Hint

• DVD-Video discs may not respond to the parental lock settings. Make sure this function
works with your DVD-Video discs.

d f

or P

d f

5

5

arental Contr

or P

arental Contr

Select “PASSWORD
CHANGE”.

back.

intended for adult and general use prohibited.

ols

ols

6

Enter your new

6

four-digit password

7

(except for 4737).

or

7

To exit
the menu

PARENTAL menu

E

You can change the other functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.

4

4

OTHERS menu

SETUP PARENTAL

PASSWORD

Enter current password.

OTHERS Setting

Select the desired item

or

SETUP PARENTAL

Please enter a 4-digit password.

5

5

ANGLE ICON:
(Default: ON)

Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.

AUTO POWER OFF:
(Default: ON)

Set to “ON” to turn this unit off automatically after
30 minutes of no use.

–16–

PASSWORD

Hint

Hint

•

Record the password in
case you forget it.

• I

f you forget the pass-

word, hit [4], [7], [3], [7]
at step 4), then enter your
new password.

•

Password will be cleared
and parental levels will be
set to “ALL”.

6 To exit the menu

6

EN

Reset to the Default Setting (except for PARENTAL Setting)

SETUP

QUICK
CUSTOM
INITIALIZE

SETUP INITIALIZE

Initialize?
NO
YES

SETUP

SETUP

SETUP

QUICK
CUSTOM
INITIALIZE

STOP

ENTERENTER

ENTERENTER

1

1

2

2

or or

3

3

4

4

To exit
the menu

<SETUP MENU>

Select “INITIALIZE”.

Select “YES”.

Hit
twice.

Hint

Hint

•

When you cancel
to initialize at step

3), select “NO”.

Information

Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit consulting the fol­lowing checklist.

Problem Solution

No power –Check if the AC power cord is properly connected.

No sound or picture –Check if the TV is switched on.

Distorted picture –Sometimes a small amount of picture distortion may appear.

Completely distorted picture or –Connect the unit directly to the TV.
black/white picture with DVD –Make sure the disc is compatible with the unit.

No sound or distorted sound –Adjust the volume.

No audio at digital output –Check the digital connections.

No DTS audio is output –This unit does not support DTS audio.

Picture freezes momentarily –Check the disc for fingerprints/scratches and
during playback clean with a soft cloth wiping from center to edge.

Disc can’t be played –Clean the disc

No return to start-up screen when disc is removed
The unit does not respond to –
the remote control –Reduce the distance to the unit.

Buttons do not work or the unit stops –To completely reset the unit, unplug the AC
responding cord from the AC outlet for 5-10 seconds.
The unit does not respond to some –Operations may not be permitted by the disc.
operating commands during playback Refer to the instructions of the disc.
The unit cannot read –Use a commonly available cleaning CD/DVD to
CDs/DVDs clean the lens before sending the unit for repair.
Angle does not switch –The angle cannot be switched for DVDs which do not contain

Playback does not start when the title is selected –Check the “PARENTAL” setting.
The password for rating level has been forgotten –Enter the default password “4737”, then your forgotten password

NOTES:

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual
for more details on correct operations.

• Playback from a desired track and random playback are not available during program playback.

• Some functions are prohibited on some discs.

–

Unplug the outlet once, and wait for 5-10seconds and then plug it in again

–Check the video connection
–Check the VIDEO/AUDIO cable connections to the TV

(See Connection to a TV)

–Set PROGRESSIVE correctly. Turn it on only if your TV has

Progressive Scan and you are using the Component Video connec­tions between the unit and the TV. Disable Progressive Scan for all
other connections. (See page 6)

This is not a malfunction.

–Connect the unit directly to the TV.

–

Check if the INTERLACE/PROGRESSIVE mode is set correctly. See page 6.

–Check that the speakers are connected correctly.

–Check if the audio format of the selected audio language matches

your receiver capabilities.

This is not a malfunction.

–Clean the disc

–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this unit.
–Handle a disc with special care so that it does not have fingerprints,

scratches, or dusts on its surface.

–Reset the unit by switching the unit off, then on again.

Aim the remote control directly at the sensor on the front of the unit.

–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of

noises. Then, turn the volume up. If you hear some signal sound
from the radio by pressing buttons on the remote control, the
remote control is working.

multiple angles. In some cases multiple angles are only recorded
for specific scenes.

will be cleared

–17–

EN

Information

Specifications

SYMPHONIC

Output signal format:

NTSC color

Power source:

120 V AC +/- 10%, 60 Hz +/- 0.5%

Power consumption:

10 W (standby: 0.8 W)

Operating temperature:

41°F (5°C) to 104°F (40°C)

Dimensions:

W : 9 5/8" (245 mm)

H : 2" (52 mm)
D : 9 13/16" (249 mm)

Weight :

Approx 2 lbs (0.9 kg)

• Designs and specifications are subject
to change without notice.

• If there is a discrepancy between lan­guages, the default language will be
English.

Language List

Language

Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851

Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166

Faroese 5261
Fiji 5256
Finnish [FIN] 5255

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 13. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)

Information

A-B

C-E

F-H

Code Language Code Language Code Language Code

French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467

Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767

Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866

I-K

L-N

Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061

Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467

Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555

O-R

S

Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568

Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Turkish [TUR] 6664
Turkmen 6657
Twi 6669

Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yoruba 7161
Zulu 7267

T

U-Z

FUNAI CORP. will repair this SYMPHONIC product, free of charge in
the USA in the event of defect in materials or workmanship as follows:

DURATION:
PARTS:

LABOR: FUNAI CORP. will provide the labor without charge for

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A pur­chase receipt or other proof of original retail purchase will be required
together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the

product are altered, replaced, defaced, missing or if service was
attempted by an unauthorized service center. This SYMPHONIC
Limited warranty does not apply to any product not purchased and
used in the United States.

This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs dur­ing normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty installa­tion, improper maintenance, commercial use such as hotel, rental or
office use of this product or damage which results from fire, flood,
lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC
PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL

Limited Warranty

FUNAI CORP. will provide parts to replace defective
parts without charge for one (1) year from the date of
original retail purchase. Certain parts are excluded
from this warranty.

a period of ninety (90) days from the date of original
retail purchase.

–18–

IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCA­SIONED BY THE USE OF OR THE INABILITY TO USE THIS PROD­UCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WAR­RANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILI­TIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT­NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DIS­CLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNIT­ED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST
BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO
FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO
STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU
ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF
THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN
OF THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest SYMPHONIC Authorized Service Center or
for general service procedure, please call or write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :[phone]

http://www.funai-corp.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

EN

STANDBY–ON

AUDIO

SUBTITLE

ANGLE

REPEAT

CLEAR

A-B

PAUSE

SLOW

SKIP

OPEN/CLOSE

DISPLAY

SEARCH

MODE

123

456

789

0 +10

PLAY

REV FWD

STOP

Español

CDCDDVD-V

DVD-V

PLAYER MENU

ENGLISH
FRANCAIS
ESPAÑOL

SETUP QUICK

PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL

ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM

ENTERENTER

ENTERENTER

ENTERENTER

• Para encender o apagar la
unidad.

• Para encender o apagar la
unidad.

• Para mostrar el modo de
disco actual.

• Para mostrar el modo de
disco actual.

• Para abrir o cerrar la bandeja
del disco.

• Para abrir o cerrar la bandeja
del disco.

• Para hacer una pausa en la
reproducción del disco.

• Para empezar la
reproducción del disco.

• Para empezar la
reproducción del disco.

• Para seleccionar
directamente el capítulo o
título.

• Para seleccionar
directamente la canción.

• Para seleccionar los ángulos
de cámara en un disco.

• Para seleccionar subtítulos
en un disco.

• Para seleccionar idiomas de
audio en un disco.

•

Para seleccionar ESTÉREO
L-ch o R-ch.

• Para repetir entre su punto A
y B seleccionado.

•

Para repetir entre su punto A y B
seleccionado.

• Para reproducir
repetidamente un capítulo o
título.

• Para reproducir repetidamente
una canción o disco

.

• Para activar/desactivar el
nivel del negro.

•

Para disponer el orden de reproducción
o la reproducción aleatoria.

• Para llamar el Menú en un
disco.

• Para llamar el menú inicial
en un disco.

• Para ampliar la imagen de
vídeo en DVD. (x2/x4)

• Para activar/desactivar el
ambiental virtual.

• Para activar/desactivar el
ambiental virtual.

• Para volver a la operación
anterior en el menú.

• Para volver a la operación
anterior en el menú.

• Para buscar un capítulo, título
o tiempo.

• Para colocar o buscar los
marcadores.

• Para buscar una canción.

• Para buscar el tiempo.

•

Para colocar o buscar los
marcadores.

• Para borrar los marcadores.

• Para borrar los marcadores.

• Para eliminar el Nº de estado

en la entrada de programa.

• Para borrar los números mal
entrados.

• Para borrar el punto para la
repetición A-B.

• Para borrar los números mal

entrados.

• Para borrar el punto para la

repetición A-B.

•

Para buscar en avance/
retroceso por un disco.

•

Para empezar la reproducción
en avance lento/retroceso
durante el modo de pausa.

• Para buscar en avance/
retroceso por un disco.

•

Para avanzar la reproducción un cuadro
cada vez.

•

Para hacer una pausa en la reproducción.

• Para parar la reproducción. • Para parar la reproducción.

• Para saltar capítulos. • Para saltar canciones.

• Para llamar el menú de

ajustes de DVD.

• Para llamar el menú de
ajustes de DVD.

• Para mover el cursor y
determinar la posición.

• Para mover el cursor y
determinar la posición.

STANDBY–ON

DISPLAY

MENU

TOP MENU

ZOOM

SUBTITLE

MODE

ANGLE

SEARCH

MODE

REPEAT

A-B

AUDIO

CLEAR

123

456

789

0

+1 0

PAUSE

PLAY

STOP

SETUP

DVD-V

DVD-V

CD

CD

Botón

(Orden alfabético)

Disco

ENTER

RETURN

REV FWD

OPEN/CLOSE

SKIP

STANDBY–ON

STOP

STANDBY–ON

OPEN/CLOSE

PLAY

✄

Conexiones

1

Si su televisor tiene entradas
de AUDIO/VIDEO vea la sec­ción “Connection to a TV” en la
página 6 en el Manual de
Manejo. En caso contrario, vea
la sección “Connecting to RF
Modulator” en la página del
frente en el Manual de Manejo.

Instalación de las pilas

2

en el control remoto

1

3

1

1

2

2

Confirme que ha seleccionado “PLAY-
ER MENU”.

3

3

4 Para salir del menú.

4

2

Para cambiar el idioma
en la pantalla

STOP

SETUP

or

Confirme que ha selec­cionado “QUICK”.

SETUP

QUICK
CUSTOM
INITIALIZE

Seleccione el idioma deseado para

las indicaciones en la pantalla.

3

SETUP

Reproducción

4

Antes.

¡

Encienda el televisor, amplificador y
otros equipos conectados a esta
unidad. Asegúrese que el televisor y el
sintonizador de audio (de venta en los
comercios) están en el canal correcto.

1

1

1

3

3

Control remoto

5

1

4

4

–19–

1

1

Para empezar la

3

3

reproducción

2

2

Para parar la

4

4

reproducción

Ponga un
disco con
la etiqueta
hacia
arriba.

Español

ES

STANDBY–ON

AUDIO

SUBTITLE

ANGLE

REPEAT

CLEAR

A-B

PAUSE

SLOW

SKIP

OPEN/CLOSE

DISPLAY

SEARCH

MODE

123

456

789

0 +10

PLAY

REV FWD

STOP

Quick Use Guide

PLAYER MENU

ENGLISH
FRANCAIS
ESPAÑOL

SETUP QUICK

PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL

ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM

• To turn the unit on or off. • To turn the unit on or off.

• To display the current disc

mode.

• To display the current disc
mode.

• To open or close the disc
tray.

• To open or close the disc
tray.

• To select chapter or title
directly.

• To select track directly.

• To select camera angles on

a disc.

• To select subtitles on a disc.

• To select audio languages on

a disc.

• To select STEREO,
L-ch or R-ch.

• To repeat between your
chosen point A and B.

• To repeat between your
chosen point A and B.

• To play a chapter or title
repeatedly.

• To play a track or disc
repeatedly.

• To return to the previous
operation in menu.

• To set black level on/off.

• To set virtual surround on/off.

• To arrange the playing

order or play randomly.

• To set virtual surround on/off.

• To call up the Menu

on a disc.

• To call up the Top Menu
on a disc.

• To magnify part of a picture.
(x2/x4)

• To return to the previous
operation in menu.

• To search chapter, title or time.

• To set or search the

markers.

• To search track.

• To search time.

• To set or search the

markers.

• To clear the markers.

• To cancel the point for A-B

repeat.

• To cancel the point for A-B
repeat.

• To clear the markers.

• To remove status number

in program input.

• To clear the numbers
entered incorrectly.

• To clear the numbers
entered incorrectly.

• To search forward/backward
through a disc.

• To begin slow forward

/reverse playback during
the pause mode.

• To search forward/backward
through a disc.

• To advance playback
one frame at a time.

• To pause disc playback.

• To pause disc playback.

• To stop playback. • To stop playback.

• To skip chapters. • To skip tracks.

• To begin disc playback. • To begin disc playback.

• To call up the DVD setup

menu.

• To call up the DVD setup
menu.

• To move the cursor and
determine its position.

• To move the cursor and
determine its position.

STANDBY–ON

DISPLAY

MENU

TOP MENU

ZOOM

SUBTITLE

MODE

ANGLE

SEARCH

MODE

REPEAT

A-B

AUDIO

CLEAR

123

456

789

0

+1 0

PAUSE

PLAY

STOP

SETUP

DVD-V

DVD-V

CD

CD

Button

(Alphabetical order)

Disc

ENTER

RETURN

REV FWD

OPEN/CLOSE

SKIP

SETUP

QUICK
CUSTOM
INITIALIZE

SETUP

ENTERENTER

ENTERENTER

ENTERENTER

SETUP

STOP

STANDBY–ON

STOP

STANDBY–ON

OPEN/CLOSE

PLAY

Connections

1

If your TV has AUDIO/VIDEO
input jacks, see the section
“Connection to a TV” on page
6 of the Owner’s Manual. If not,
see the section “Connecting to
RF Modulator” on the front
page of the Owner’s Manual.

Installing the Batteries

2

for the Remote Control

1

3

1

1

2

2

Confirm that “PLAYER MENU” is selected.

3

3

4 To exit the menu.

4

Printed in China

2

To Change the On­Screen Language

Confirm that “QUICK” is
selected.

Select the desired language

for the On-Screen Display.

or

3

Playback

4

Before:

¡

Turn on the TV, amplifier and any other equip­ments which are connected to this unit. Make
sure the TV and audio receiver (commercially
available) are set to the correct channel.

1

1

1

3

3

Remote Control

5

1

4

4

DVD-V

DVD-V

1

1

To start playback

3

3

CD

CD

2

2

To stop playback

4

4

Insert a

disc with

label

facing up.

1VMN20430 / E6150UD ★★★★★

✄