Symmons Industries Inc. 31 Brooks Drive, Braintree, MA 02184 p 781.848.2250 f 800.961.9621 www.symmons.com
Symmons Industries, Inc. 2019 Product Manual: Appendix A
Symmons Water Management
Model: WW-05256, Sensor Module
Product Manual: Appendix A (R3)
Symmons Industries Inc. 31 Brooks Drive, Braintree, MA 02184 p 781.848.2250 f 800.961.9621 www.symmons.com
Symmons Industries, Inc. 2019 Product Manual: Appendix A
Device Compliance:
Symmons Industries Inc. 31 Brooks Drive, Braintree, MA 02184 p 781.848.2250 f 800.961.9621 www.symmons.com
Symmons Industries, Inc. 2019 Product Manual: Appendix A
FCC COMPLIANCE STATEMENTS
CAUTION: Changes or modifications not expressly approved could void your authority to use
this equipment
This device complies with Part 15 of the FCC Rules. Operation to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation
This device must be installed to provide a minimum of 20cm separation from persons to
comply with FCC, Canada and other national RF exposure limits
INDUSTRY CANADA STATEMENTS
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Transmitters evaluated by measurement of output power at an antenna terminal:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Loading...