Symmons W400 Installation Manual
Laundry-Mate
Automatic Washing Machine Valve
W-400, W-500-B
™
Installation Instructions
Model Numbers
W-400 Valve assembly
W-500-B Valve assembly
Step 1 Sweat union ells to 1/2 inch copper tubing
Step 2 Screw union ells to wall
Step 3 Mount valve to wall
Step 4 Attach handle lever to valve
Operation
Single lever handle to
manually control both
hot and cold water
supply to machine.
Switch water supply
off after use to prevent bursting supply
hoses and protect machine solenoid valves.
with enclosure
Need Help?
Contact Symmons customer service at
(800) 796-6667, (781) 848-2250
Email: customerservice@symmons.com
Monday - Friday 7:30 am - 7:00 pm EST
Please check Symmons website for technical help,
the latest product information and warranty policy at
www.symmons.com/service
Step 5 Attach water supply hoses from washing
Step 6 Snap enclosure onto valve
Step 7 Slide handle sleeve over end of lever
4
handle lever
assembly
machine to valve
(model W-500-B only)
2-5/16"
(59 mm)
Model W-500-B
2
Note: wood
screws not
included
Enclosure,
66
W-500-B
model only
7
3
1
5
OFF
S
Y
M
M
O
N
MIX
S
Washing machine
hoses and washers
(not included)
HOT
supply
supply
1/2 inch
copper tubing
(not included)
COLD
Dimensions Laundry-Mate Automatic Washing Machine Valve, W-500-B
3.83"
(97 mm)
2.7"
(69 mm)
2"
(51 mm)
Symmons Industries, Inc. 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc. Printed in U.S.A. ■ www.symmons.com ■ gethelp@symmons.com ■ ZV-108 ■ 021914
Loading...