®
Vella
Kitchen Faucet S-2610
Installation and Service Instructions
Model Numbers
S-2610.....
Kitchen Faucet
Tools & Materials
Decorative Finish Codes
Append to part numbers when applicable
-STN
-STS
--
Satin Nickel
Stainless Steel
Chrome (standard)
1/8 "
Quick Install Guide Vella Kitchen Faucet, S-2610
Spray
on / off
Pull-out spout
operation
nished deck
front view
Need Help?
Symmons customer service:
(800) 796-6667, (781) 848-2250
Email: customerservice@symmons.com
Monday - Friday 7:30 am - 6:00 pm EST
www.symmons.com/service
• Technical help
• Product information
• Warranty policy
Step 6
Flush supply lines
and check for leaks
Step 7
Turn limit stop clockwise to
limit handle turn to the hot
position if desired.
Step 1
Fasten deck plate
(optional)
Step 4
Attach counterweight
HOT
Step 2
Attach faucet
red stripe
blue stripe
Step 5
Connect water
supply lines
COLD
Step 3
Connect pull-out
spout hose
Installation Instructions
Installation Instructions
Caution: If replacing an older faucet ensure water supply is
turned OFF before removing and then turn faucet handles ON
to relieve water pressure.
Step 1 Attach deck plate (optional)
Installing deck plate is optional. Plate is typically used when
replacing a faucet to cover existing holes.
nished deck
front view
Step 3 Connect pull-out spout hose
blue stripe
red stripe
no stripe
washer
Step 2 Attach faucet assembly to deck
single hole mount
without deck plate
align
at edges
front view
nished deck
Step 4 Attach counterweight to hose
~ 25 inches
(635 mm)
Page 2
Page 2
Step 5 Connect supply lines
HOT
Care of faucet fi nish
Clean nish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve nish area.
Valve cartridge replacement
Removing handle and cartridge
1/8"
COLD
Step 6 Flush supply lines and check for leaks
washer
Replacing cartridge and handle
1
2
Page 3Page 3
1/8"
Dimensions Vella Kitchen Faucet, S-2610
*
optional decorative nish, append appropriate
three letter sufx code to part numbers marked
with an asterisk (
*
4"
(102 mm)
deck plate
1/4" (6 mm)
Finished deck
thickness
1-5/8" max
(41 mm)
deck plate
10-1/8" (257 mm)
3/4" dia. (19 mm)
deck plate hole size
7/8" (22 mm) min
1-1/8" (29 mm) max
8"
(203 mm)
(308 mm)
2-3/8"
(62 mm)
12-1/8"
10-1/8"
(258 mm)
1-1/8" dia (29 mm)
center spout hole size
1-1/4" (32 mm) min
1-1/2" (38 mm) max
10" (255 mm)
8-1/4"
(209 mm)
11"
(280 mm)
deck plate
2-5/8" (67 mm)
Parts Assembly Vella Kitchen Faucet, S-2610
handle*
screw, 1/4-28 x 5/16
plug button*
collar*
retaining ring
pull-out spout*
standard aerator
2.2 gpm
washer
see table
11-7/8"
*
(302 mm)
9-7/8"
*
(251 mm)
Finished deck thickness
*
1-7/8" (48 mm) max
Single hole mount without
*
deck plate installed
Note: Dimensions subject to change without notice.
8"
*
(203 mm)
10-3/4"
*
(273 mm)
Replacement Parts
Part Number Item
KN-4
SC-12W
valve cartridge
Pull-out spout hose washer
Washer for exible
metal type hose
valve cartridge
faucet body*
deck plate*
gasket
ber washer
ange nut
ber washer
mounting nut
pull-out spout
(metal or nylon type)
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects,
or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
supply hose
lead weight
screws
1/4-20 x 1/2
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-497 REV C ■ 053119
adapter
washer
hot supply hose
with red stripe
3/8"
cold supply hose
with blue stripe
KN-236A
LN-216
LN-15-1.5-NA
Note: When ordering parts for faucets with an
Washer for nylon
type hose
aerator ow rates
2.2 gpm (8.3L/min)
1.5 gpm (5.7L/min)
).
Ordering replacement parts:
Symmons customer service: (800) 796-6667,
(781) 848-2250 M-F 8:00 am - 7:30 pm EST
Symmons distributors: www.symmons.com
Loading...