Symmons The Smart Choice Water Dance 1-7480-TRM Operation & Maintenance Manual

1-7480-TRM
Water Dance

™

Two Wall Shower Trim

Operation & Maintenance Manual

Model Numbers Specifications

1-7480-TRM Two Wall Shower Trim

Two wall shower trim with lever handle includes
30" slide bar with cradle for hand shower, individual
volume controls for each outlet, in-line vacuum breaker,
exible metal hose, 3 body sprays, 3 mode hand shower
and 3 mode showerhead with 2.5 gpm (9.5 L/min)
ow restrictor. Components are made from metal and
nonmetallic materials plated in standard polished
chrome nish.

Modifications Warranty

-STN Satin nickel finish

Limited Lifetime - to the original end purchaser in

consumer installations.
5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete
warranty information.

Note: Append appropriate -sufx to model number.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-3069 REV 0 09/22/14

Dimensions

RR

TT

D

D

AA

SS

B

B

C

C

A Ø 2 1/4", 57 mm

Measurements

B 5", 127 mm

SS

F

F

G

G

C 6 1/2", 165 mm

D Ø 1 11/16", 43 mm

E

E

E 8", 203 mm right or left

I

H

H

H

H

M

M

I

L

L

K

K

J

J

O

O

Q

Q

N

N

P

P

F 2 1/8", 54 mm

1/2" IPS thread must be

G

recessed 1/4" from

nished wall

H 12", 305 mm

I Ø 3 1/8", 79 mm

J Ø 7 1/2", 191 mm

K 12", 305 mm

L 3 1/2", 89 mm

M 36", 914 mm

N 41", 1041 mm

Floor

Floor

O 3 1/8", 79 mm

P 2 7/8", 73 mm

Q

2 5/8"± 1/4, 67 mm ± 6 mm

(Rough in)

R 1/2", 13 mm

S 3/4", 19 mm

Female 1/2" IPS thread

T

must be recessed 1/4" from

nished wall.

Notes:

1) All dimensions measured from nominal rough-in (see Q as reference).

2) Dimensions are subject to change without notice.

2

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-3069 REV 0 09/22/14

Parts Breakdown

Replacement Parts

E

Item Description Part Number

B

A

C

D

N

R

M

O

Q

I

P

A
B

C Showerhead 4-143

D
E
F
G
H
J

H

G

F

L

BB

K

K

I

L Sleeve HF-139

Body Spray

Body Spray Flange

Shower Arm

Shower Arm Flange

Volume Control Handle

O-ring

Spindle Extension

Set Screw

Volume Control Dome

Volume Control

Escutcheon

4-412

300

HF-147

HF-138

J

M Wall Elbow EF-105

N Hand Shower EF-101

V

U

T

Z

AA

S

Y

X

W

O

BB

P

Q

R
S
T

W

X

Vacuum Breaker

60" Hose

Cap
Mounting Hardware
Slide Bar Assembly

Set Screw

Flange

Shower Handle

O-ring

EF-104

SC-115

HF-28-LAM

U Lock Nut SC-18

V Shower Dome Cover SC-13B-PL

Y Dial HF-117

Z

AA

Mounting Screws

Shower Escutcheon

HF-112

Notes:

1) Append -STN to part number for satin nickel nish.

Required for Installation

Adjustable wrench

Phillips head screwdriver

Allen wrench (1/8")

Plumber tape

3

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-3069 REV 0 09/22/14

Installation

2

2

2

2

2

3

Note:

For valve body installation, please
see valve body installation guides.

1) Install shower escutcheon (AA)
to shower valve. Secure with two
screws (Z).

AA

3) Install volume control dome
cover (K), o-ring (G), and volume
control handle (J) to volume
control valve and secure with set
screw (F).

G

1

5)

Install o-ring (X), flange (T), and
shower handle (W) to valve and
secure with set screw (S).

X

W

1

1

Z

2) Attach volume control
escutcheon (I), and spindle
extension (H) to volume control
valve

. Secure with

sleeve (L).

I

1

H

L

F

K

S

T

J

2

Notes: Handles should be facing

the 6 o'clock position.

Notes: Handle should be facing

the 6 o'clock position.
Temperature indicator will be
facing the 12 o'clock position.

4) Install shower dome cover (V) and
dial (Y) to shower valve and
secure with lock nut (U).

6) Install body spray (A) and
flange (B) to pipe fitting.
Turn clockwise to secure.

Secure
ange with set screw. Repeat for
remaining body sprays.

B

Y

1

1

A

V

U

4

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-3069 REV 0 09/22/14

Installation

7a)

3

3

1

Dry Wall Option: R

emove
upper and lower caps (P) from
30" slide bar brackets. Place
30" slide bar (R) into desired
position. Using brackets as a
guide, carefully drill 3/16" holes
into wall. Remove 30" slide bar
and install anchors.

7b) Stud Option: R

emove upper
and lower caps (P) from 30"
slide bar brackets. Place
30" slide bar (R) into desired
position. Using brackets as a
guide, carefully drill 1/8" pilot
holes into stud.

8) With 30" slide bar (R) in position,
secure to wall using screws (Q).
Replace upper and lower caps (P)
onto 30" slide bar brackets.

P

2

P

P

1

Q

1

4

2

2

RR

R

R

2

2

P

2

P

P

1

1

4

Notes: Make sure that 30" slide

Notes: Make sure that 30" slide

bar holes and bracket holes are
aligned before drilling. Before drilling
bottom hole, make sure 30" slide

bar holes and bracket holes are
aligned before drilling. Before
drilling bottom hole, make
sure 30" slide bar is plumb.

bar is plumb.

5

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-3069 REV 0 09/22/14

2

2

4

2

Installation

9) Install wall elbow (M) to pipe
tting. Secure with set screw.

1

M

10) Attach shower arm (D) and

ange (E) to vertical shower pipe
turning clockwise to tighten.

1

11) Install showerhead (C) to shower
arm (D). Turn clockwise to
tighten.

D

1

C

12) Attach large end of hand
shower hose (BB) to hand
shower (N). Attach small end
of hand shower hose (BB)
and gasket to in-line vacuum
breaker (O). Connect in-line
vacuum breaker to wall
elbow (M). Turn clockwise
to tighten.

N

1

BB

M

3

2

E

D

O

BB

6

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-3069 REV 0 09/22/14

Operation

Temperature Control Volume Control

1) Turn shower handle counterclockwise approximately
1/4 turn to put valve in cold position.

2) Turn shower handle counterclockwise approximately
1/2 turn to put valve in warm position.

3) Turn shower handle counterclockwise approximately
3/4 turn to put valve in hot position.

1) Turn diverter lever 1/2 turn for low pressure operation.

2) Turn diverter lever 3/4 turn for high pressure operation.

Care and Cleaning

1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.

Troubleshooting Chart

Problem Cause Solution

Finish is spotting. Elements in water supply may cause

water staining on nish.

7

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-3069 REV 0 09/22/14

Clean nished trim area with a soft

cloth using mild soap and water or a

non-abrasive cleaner and then

quickly rinse with water.