Symmons TDHN1914 Specifications

Location:

CG

Identity

™

S6708TRM, S6708TRMTC
Shower/Hand Shower Trim

Specification Submittal

Feature Highlights Options/Modifications

• Identity Shower/Hand Shower Trim

• Requires Temptrol® Pressure Balancing Tub/Shower Valve

• Integral diverter control

• Metal lever handle

• Cradle for hand shower wand

• 60" exible metal hose

• 1 mode hand shower

• Dual checks for backow protection

• 1 mode showerhead with easy to clean nozzles

• 2.5 gpm (9.5 L/min) ow restrictors

• Tub spout not included

• Components shall be metal and nonmetallic construction, plated in
standard Polished Chrome nish

• Available with TA-10 ow control spindle and T-12A cap assembly
for Temptrol valve bodies installed with Test Cap

(order p/n S6708TRMTC)

• For optional in-line vacuum breaker order p/n EF-109

Model Numbers

☐

S6708TRM

Shower/Hand Shower Trim with integral diverter control,
Temptrol Pressure Balancing Tub/Shower Valve ordered separately

☐

S6708TRMTC

Shower/Hand Shower Trim with integral diverter control,
TA-10 ow control spindle and T-12A cap assembly, must order
Temptrol valve with Test Cap

Compliance

• ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete warranty information.
Go to www.symmons.com/register to register your Symmons product.

☐

-1.5 1.5 gpm (5.7 L/min) flow restrictor

☐

-2.0 2.0 gpm (7.6 L/min) flow restrictor

☐

-72 72" hose in place of 60" hose

☐

-143 3 mode showerhead

☐

-145 5 mode showerhead

☐

-231 Super showerhead

☐

-ADACHS ADA hand shower wand (chrome)

☐

-ADAHS ADA hand shower wand (white)

☐

-B30 30" slide bar in place of wall cradle

☐

-B48 48" slide bar in place of wall cradle

☐

-EX Exposed column/slide bar, hand shower bracket

and hand shower wand (35EX)

☐

-H321-V 1 mode hand shower unit with slide bar

☐

-H323-V 3 mode hand shower unit with slide bar

☐

-H323-V-48 3 mode hand shower unit with 48" slide bar

☐

-H3524 24" decorative slide/grab bar with ADA wand

☐

-H3536 36" decorative slide/grab bar with ADA wand

☐

-L1 Less showerhead

☐

-L2 Less hand shower wand

☐

-L3 Less showerhead & hand shower wand

☐

-LP Loop handle

☐

-LR Lever handle

☐

-QD Quick-disconnect on hand shower units

☐

-R 60" white vinyl hose in place of 60" metal hose

☐

-REB Rebuild trim kit, includes TA-10 and TA-4

☐

-SS Slip spout on any tub/shower unit

☐

-T724 24" slide bar/grab bar with ADA wand

☐

-T736 36" slide bar/grab bar with ADA wand

☐

-T748 48" slide bar/grab bar with ADA wand

☐

-VB Elevated vacuum breaker

☐

-VP Vandal resistant escutcheon screws in place of

standard screws

☐

-STN Satin Nickel finish

Note: Append appropriate -sufx to model number.

Dimensions

AA

CC

BB

DD

EE

Measurements

A Ø 2-1/2", 64 mm
B 5-7/8", 149 mm
C 2-1/8", 54 mm

Male 1/2" IPS tting

D

must be recessed 1/4" (6 mm)

from nished wall
E 3-1/2", 89 mm
F Ø 6-3/8", 162 mm
G Ref. 77", 1956 mm
H 3-1/2", 89 mm

I 2-7/8", 73 mm

J

2-3/8" ± 1/2", 60 mm ± 13 mm

Rough-in

FF

FLOORFLOOR

GG

HH

II

JJ

Notes:

1) Valve body and piping not included and shown as reference only.

2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater.

3) All dimensions measured from nominal rough-in (see J as reference).

4) Dimensions subject to change without notice.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]

Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-1954 REV 0 ■ 090119