Location:
CG
®
Origins
9601-P-TRM, 9601PTRMTC
Shower Trim
Specification Submittal
Feature Highlights Options/Modifications
• Origins Shower Trim
• Requires Temptrol® Pressure Balancing Shower Valve
• Tri-star handle
• 1 mode showerhead with easy to clean nozzles
• 2.5 gpm (9.5 L/min) ow restrictor
• Tub spout not included
• Components shall be metal and nonmetallic construction, plated in
standard Polished Chrome nish
• Available with TA-10 ow control spindle and T-12A cap assembly
for Temptrol valve bodies installed with Test Cap
(order p/n 9601PTRMTC)
Model Numbers
☐
9601-P-TRM
Shower Trim, Temptrol Pressure Balancing Shower Valve ordered
separately
☐
9601PTRMTC
Shower Trim with TA-10 ow control spindle and
T-12A cap assembly, must order Temptrol valve with Test Cap
Compliance
• ASME A112.18.1/CSA B125.1
☐
-1.5 1.5 gpm (5.7 L/min) flow restrictor
☐
-2.0 2.0 gpm (7.6 L/min) flow restrictor
☐
-143 3 mode showerhead
☐
-145 5 mode showerhead
☐
-151 1 mode showerhead
☐
-231 Super showerhead
☐
-295 Institutional showerhead
☐
-B Brass escutcheon (chrome only)
☐
-D Brass dome cover (chrome only)
☐
-L1 Less showerhead
☐
-LAM Metal finish insert handle
☐
-LP Loop handle
☐
-REB Rebuild trim kit, includes TA-10 and TA-4
☐
-VP Vandal resistant escutcheon screws in place of
standard screws
Note: Append appropriate -sufx to model number.
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete warranty information.
Go to www.symmons.com/register to register your Symmons product.
Dimensions
DD
BB
AA
CC
EE
HH
Measurements
A 6-3/8", 162 mm
B 3-1/2", 89 mm
C 2-7/8", 73 mm
Shower Valve Hole Size
D
II
E Ref. 77", 1956 mm
F
G Ref. 42", 1067 mm
H Ø 2-1/2", 64 mm
I Ø 2-3/4", 70 mm
J 2-1/8", 54 mm
K Ø 5-3/4", 146 mm
Min. Ø 3", 76 mm
Max. Ø 4", 102 mm
Rough-in
2-3/8" ± 1/2", 60 mm ± 13 mm
JJ
FF
KK
GG
FLOORFLOOR
Notes:
1) Valve body and piping not included and shown as reference only.
2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater.
3) All dimensions measured from nominal rough-in (see F as reference).
4) Dimensions subject to change without notice.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-1323 REV B ■ 020119
Loading...