Symmons SYM1737 Specifications

Location:

CG

Identity

™

S-6702-TRM, S6702TRMTC
Tub/Shower Trim

Specification Submittal

Feature Highlights Options/Modifications

• Identity Tub/Shower Trim

• Requires Temptrol® Pressure Balancing Tub/Shower Valve

• Integral diverter control

• Metal lever handle

• 5-1/4" non-diverter tub spout

• 1 mode showerhead with easy to clean nozzles

• 2.5 gpm (9.5 L/min) ow restrictor

• Components shall be metal and nonmetallic construction, plated in
standard Polished Chrome nish

• Available with TA-10 ow control spindle and T-12A cap assembly
for Temptrol valve bodies installed with Test Cap

(order p/n S6702TRMTC)

Model Numbers

☐

S-6702-TRM

Tub/Shower Trim with integral diverter control,
Temptrol Pressure Balancing Tub/Shower Valve ordered separately

☐

S6702TRMTC

Tub/Shower Trim with integral diverter control,
TA-10 ow control spindle and T-12A cap assembly, must order
Temptrol valve with Test Cap

☐

-1.5 1.5 gpm (5.7 L/min) flow restrictor

☐

-2.0 2.0 gpm (7.6 L/min) flow restrictor

☐

-143 3 mode showerhead

☐

-145 5 mode showerhead

☐

-231 Super showerhead

☐

-EX Exposed column/slide bar, hand shower bracket

and hand shower wand (35EX)

☐

-L1 Less showerhead

☐

-LP Loop handle

☐

-LR Lever handle

☐

-REB Rebuild trim kit, includes TA-10 and TA-4

☐

-SS Slip spout on any tub/shower unit

☐

-VP Vandal resistant escutcheon screws in place of

standard screws

☐

-STN Satin Nickel finish

Compliance

• ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete warranty information.
Go to www.symmons.com/register to register your Symmons product.

Note: Append appropriate -sufx to model number.

Dimensions

AA

EE

CC

BB

DD

Measurements

A Ø 2-1/2", 64 mm
B 5-7/8", 149 mm
C Ref. 77", 1956 mm
D 3-1/2", 89 mm

E

F Ref. 32", 813 mm
G Ref. 12", 305 mm
H 3-1/2", 89 mm

I 2-7/8", 73 mm

J

K

L 5-1/4", 133 mm

M Ø 2-1/2", 64 mm

6-3/8", 162 mm

Ø

Rough-in

2-3/8" ± 1/2", 60 mm ± 13 mm

Male 1/2-14 NPT tting

must protrude 4" (102 mm)

from nished wall

HH

GG

II

FF

MM

KK

LL

FLOORFLOOR

Notes:

1) Valve body and piping not included and shown as reference only.

2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater.

3) All dimensions measured from nominal rough-in (see J as reference).

4) Dimensions subject to change without notice.

JJ

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]

Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-1547 REV B ■ 083119