Page 1
Location:
Identity
™
6700-TRM, 6700TRMTC
Shower Valve Trim
Specification Submittal
Feature Highlights Options/Modifications
• Identity Shower Valve Trim
• Requires Temptrol® Pressure Balancing Shower Valve
• Metal lever handle
• Showerhead not included
• Tub spout not included
• Components shall be metal and nonmetallic construction, plated in
standard Polished Chrome nish
• Available with TA-10 ow control spindle and T-12A cap assembly
for Temptrol valve bodies installed with Test Cap
(order p/n 6700TRMTC)
Model Numbers
☐
6700-TRM
Shower Trim, Temptrol Pressure Balancing Shower Valve ordered
separately
☐
6700TRMTC
Shower Trim with TA-10 ow control spindle and
T-12A cap assembly, must order Temptrol valve with Test Cap
☐
-LP Loop handle
☐
-LR Lever handle
☐
-REB Rebuild trim kit, includes TA-10 and TA-4
☐
-VP Vandal resistant escutcheon screws in place of
standard screws
☐
-STN Satin Nickel finish
Note: Append appropriate -sufx to model number.
Compliance
• ASME A112.18.1/CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete warranty information.
Go to www.symmons.com/register to register your Symmons product.
Page 2
Dimensions
CC
BB
EE
AA
DD
GG
FF
Measurements
A
B
C
D
E
F
G
3-1/2", 89 mm
2-7/8", 73 mm
Shower Valve Hole Size
Min. Ø 3", 76 mm
Max. Ø 4", 102 mm
3-1/2", 89 mm
Rough-in
2-3/8" ± 1/2", 60 mm ± 13 mm
Ref. 42", 1067 mm
Ø 6-3/8", 162 mm
Notes:
1) Valve body and piping not included and shown as reference only.
2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater.
3) All dimensions measured from nominal rough-in (see E as reference).
4) Dimensions subject to change without notice.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-1535 REV A ■ 020119
Loading...