Page 1
Location:
CG
Identity
™
6706-TRM, 6706TRMTC
Tub/Shower/Hand Shower Trim
Specification Submittal
Feature Highlights Options/Modifications
• Identity Tub/Shower/Hand Shower Trim
• Requires Temptrol® Pressure Balancing Tub/Shower Valve
• Requires Symmons Triple Outlet Diverter Valve
• Metal lever handle
• Cradle for hand shower wand
• Dual checks for backow protection
• 60" exible metal hose
• 5-1/2" non-diverter tub spout
• 1 mode hand shower wand with easy to clean nozzles
• 1 mode showerhead with easy to clean nozzles
• 2.5 gpm (9.5 L/min) ow restrictors
• Components shall be metal and nonmetallic construction, plated in
standard Polished Chrome nish
• Available with TA-10 ow control spindle and T-12A cap assembly
for Temptrol valve bodies installed with Test Cap
(order p/n 6706TRMTC)
• For optional in-line vacuum breaker order p/n EF-109
Model Numbers
☐
6706-TRM
Tub/Shower/Hand Shower Trim,
Temptrol Pressure Balancing Tub/Shower Valve and
Symmons Triple Outlet Diverter valve ordered separately
☐
6706TRMTC
Tub/Shower/Hand Shower Trim with TA-10 ow control spindle and
T-12A cap assembly, must order Temptrol valve with Test Cap
Compliance
• ASME A112.18.1/CSA B125.1
☐
-1.5 1.5 gpm (5.7 L/min) flow restrictor
☐
-2.0 2.0 gpm (7.6 L/min) flow restrictor
☐
-72 72" hose in place of 60" hose
☐
-143 3 mode showerhead
☐
-145 5 mode showerhead
☐
-231 Super showerhead
☐
-ADACHS ADA hand shower wand (chrome)
☐
-ADAHS ADA hand shower wand (white)
☐
-B30 30" slide bar in place of wall cradle
☐
-B48 48" slide bar in place of wall cradle
☐
-EX Exposed column/slide bar, hand shower bracket
and hand shower wand (35EX)
☐
-H321-V 1 mode hand shower unit with slide bar
☐
-H323-V 3 mode hand shower unit with slide bar
☐
-H323-V-48 3 mode hand shower unit with 48" slide bar
☐
-H3524 24" decorative slide/grab bar with ADA wand
☐
-H3536 36" decorative slide/grab bar with ADA wand
☐
-L1 Less showerhead
☐
-L2 Less hand shower wand
☐
-L3 Less showerhead & hand shower wand
☐
-LP Loop handle
☐
-LR Lever handle
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete warranty information.
Go to www.symmons.com/register to register your Symmons product.
☐
-QD Quick-disconnect on hand shower units
☐
-R 60" white vinyl hose in place of 60" metal hose
☐
-REB Rebuild trim kit, includes TA-10 and TA-4
☐
-SS Slip spout on any tub/shower unit
☐
-T724 24" slide bar/grab bar with ADA wand
☐
-T736 36" slide bar/grab bar with ADA wand
☐
-T748 48" slide bar/grab bar with ADA wand
☐
-VB Elevated vacuum breaker
☐
-VP Vandal resistant escutcheon screws in place of
standard screws
☐
-STN Satin Nickel finish
Note: Append appropriate -sufx to model number.
Page 2
Dimensions
MM
CC
OOGG
KK
HH
FF
AA PP
QQ
SS
LL
NN
BB
DD
JJ
RR
TT
UU
VV
FLOORFLOOR
EE
II
Measurements
A 5-7/8", 149 mm
B 4-5/8", 117 mm
Male 1/2" NPT tting must be
C
D
E 3-1/2", 89 mm
F 2-7/8", 73 mm
G Ref. 10", 254 mm
H
I
J 3-1/2", 89 mm
K Ref. 12", 305 mm
L
M Ref. 32", 813 mm
N 5-1/2", 140 mm
O Ref. 77", 1956 mm
P Ø 2-1/2", 64 mm
Q Ø 3-1/8", 79 mm
R 6", 152 mm
S 2-1/8", 54 mm
T Ø 5", 127 mm
U Ø 6-3/8", 162 mm
V Ø 2-1/2", 64 mm
recessed 1/4" (6 mm) from
nished wall
Diverter Valve Hole Size
Min. Ø 3", 76 mm
Max. Ø 3-1/4", 83 mm
Shower Valve Hole Size
Min. Ø 3", 76 mm
Max. Ø 4", 102 mm
Rough-in
2-3/8" ± 1/2", 60 mm ± 13 mm
Male 1/2-14 NPT tting must
protrude 4" (102 mm)
from nished wall
Notes:
1) Valve body and piping not included and shown as reference only.
2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater.
3) All dimensions measured from nominal rough-in (see I as reference).
4) Dimensions subject to change without notice.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-1541 REV D ■ 020119
Loading...