Symmons SYM1202 Specifications

5505-TRM, 5505TRMTC

CG

Shower/Hand Shower Trim

Specification Submittal

Location

®

Elm

Feature Highlights

• Elm Shower/Hand Shower Trim

• Requires Temptrol® Pressure Balancing Shower Valve

• Requires Symmons Dual Outlet Diverter Valve

• Metal lever handles

• Cradle for hand shower wand

• Dual checks for backflow protection

• 60" flexible metal hose

• 3 mode hand shower wand

• 5 mode showerhead

• 2.0 gpm (7.6 L/min) flow restrictors

• Tub spout not included

• Components shall be metal and nonmetallic construction,
plated in standard Polished Chrome finish

• Available with TA-10 flow control spindle and T-12A cap
assembly for Temptrol valve bodies installed with Test Cap

(order p/n 5505TRMTC)

• For optional in-line vacuum breaker order p/n EF-109

Model Numbers

☐

5505-TRM

Shower/Hand Shower Trim,
Temptrol Pressure Balancing Shower Valve and
Symmons Dual Outlet Diverter valve ordered separately

☐

5505TRMTC

Shower/Hand Shower Trim with TA-10 flow control spindle
and
T-12A cap assembly, must order Temptrol valve with Test
Cap

Options/Modifications

☐

-1.5 1.5 gpm (5.7 L/min) flow restrictor

☐

-L1 Less showerhead

☐

-L2 Less hand shower wand

☐

-L3 Less showerhead & hand shower wand

☐

-L5 Less hand shower system

☐

-SBZ Seasoned Bronze

☐

-STN Satin Nickel finish

Note: Append appropriate -sux to model number.

Warranty

Limited Lifetime - to the original end

purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.

Compliance

• ASME A112.18.1/CSA B125.1

Architectural/ Engineering Specification

Symmons ____________ With Elm Shower/Hand Shower Trim, requires Temptrol® pressure balancing shower valve, Requires Symmons
Dual Outlet Diverter Valve, metal lever handle, Cradle for hand shower wand, Dual checks for backflow protection, 60" flexible metal
hose, 3 mode hand shower wand, 5 mode showerhead, 2.0 gpm (7.6 L/min) flow restrictor, Tub spout not included, components shall
be metal and nonmetallic construction, plated in standard Polished Chrome finish, available with TA-10 flow control spindle and T-12A
cap assembly for Temptrol valve bodies installed with Test Cap (order p/n 5505TRMTC), For optional in-line vacuum breaker order p/n
EF-109. 10 Year commercial Warranty. ASME A112.18.1/CSA B125.1, Complaint. Available options include "1.5 - 1.5 gpm (5.7 L/min) flow
restrictor", "L1 - Less showerhead", "L2 - Less hand shower wand", "L3 - Less showerhead & hand shower wand", "L5 - Less hand shower
system", "SBZ - Seasoned Bronze", “STN - Satin nickel finish”.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]

Copyright © 2022 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-1288 REV C ■ 060722

5505-TRM, 5505TRMTC

approx.

32"

(813 mm)

oor line

2"

(51 mm)

8"

(203 mm)

hot and cold inlets

2-3/8" ±1/2"

(60 mm ±13 mm)

Screw wall
cradle into
stud or install
proper backing.

approx.

6" (152 mm)

4-5/8"

(118 mm)

approx.

45"

(1143 mm)

nished wall

∅ 5"

(127 mm)

∅ 7-1/2"

(191 mm)

Male 1/2" IPS thread
must protrude
1/2" (13 mm) from
nished wall for
proper installation
of wall ell.

4" (102 mm)

minimum

less stops

5-1/2"
(140 mm)
minimum

with stops

8" ±1/2"

(202 mm ±13 mm)

∅ 2-1/4"

(57 mm)

2-3/4"

(70 mm)

3-1/2" ±1/2"

(89 mm ±13 mm)

2"

(51 mm)

shower
discharge

3-1/2"

(89 mm)

Rough-in

Dimensions

®

Elm

Notes:

1) Valve body and piping not included and shown as reference only.

2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater.

3) All dimensions measured from nominal rough-in.

4) Dimensions subject to change without notice.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]

Copyright © 2022 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-1288 REV C ■ 060722