Symmons Lig-Res Diverter Valve Trim Installation Instructions Manual

Lig-Res
Diverter Valve Trim Ligature resistant
Installation Brief
Model Number
57-458-TRM . Diverter Valve Trim
(diverter valve not included)
Tools & Materials
5/32" hex wrench included
Disclaimers
Product is designed to reduce
Product is not a substitute for
57-458-TRM
likelihood that unit can be used as a device for hanging.
the evaluation, treatment or appropriate supervision of persons at risk of suicide.
Need Help?
Symmons customer service: (
800) 796-6667, (781) 848-2250 customerservice@symmons.com Mon - Fri 7:30 am - 7:00 pm EST
www.symmons.com/service
• Technical help
• Product information
• Warranty policy
Care and cleaning
Clean nished area using mild soap or a non-abrasive cleaner and then quickly rinse with water. A non­abrasive wax may be used to preserve nish area.
Visual Installation Guide Lig-Res Diverter Valve Trim, 57-458-TRM
Knob kit
RTS-029
5/32" ligature resistant hex wrench included
Note: Valve, piping, and ttings are not included. Actual plumbing should be determined and installed by a licensed plumber.
RTS-030
Dome cover Escutcheon
Finished wall
Dimensions Lig-Res Diverter Valve Trim, 57-458-TRM
nished wall
2-1/2" (64 mm) min 3-5/8" (92 mm) max*
*
5-5/8" dia
(143 mm)
3-1/2" (89 mm) max
2-3/4" (70 mm) min
Notes:
(1) Dimensions identied with an asterisk (
without primary mixing control valve.
When diverter valve is coupled with a primary mixing control valve, then dimen-
sion is determined by rough-in drawing provided with mixing control valve.
(2) Dimensions subject to change without notice
3-7/8" (98 mm) max
*
Hole size
3" (76 mm) min
*
*
) apply when diverter valve is installed
4-1/4" (108 mm) min 5-3/8" (137 mm) max
Diverter valve (dual port)
1-1/4" (32 mm)
*
*
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 (800)796-6667, (781)848-2250 Fax: (800)961-9621, (781)664-1300
©2012 Symmons Industries, Inc. Printed in U.S.A. www.symmons.com customerservice@symmons.com ZV-1086 080412
Loading...