Symmons HTA-100 User Manual

Location:
Print
Reset Form
TempControl
®
High Temperature Audio Visual Alarm System, HTA-100
Specification Submittal
Model Number
HTA-100
Options / Modifications
Solenoid Valves
Temperature Probe Cables
Note: Contact Symmons for additional lengths in 50 foot increments (1000 foot max)
Tee Fittings (required)
Water Hammer Arrester
SV-102
SV-200
SV-400
SV-500
SV-700/900
SV-1000
TPC-50
TPC-100
TF-102
TF-200
TF-400
TF-500
TF-700/900
TF-1000
WHA-1
Warranty
Limited Lifetime - to the original end purchaser in
residential/consumer installations
5 years - for commercial installations
High temperature audio visual alarm system (Reference alarm kit content below. A Tee tting for temperature probe is also required and ordered separately.)
1/2" NPT Solenoid Valve
3/4" NPT Solenoid Valve
1" NPT Solenoid Valve
1-1/4" NPT Solenoid Valve
1-1/2" NPT Solenoid Valve
2" NPT Solenoid Valve
50 foot probe cable
100 foot probe cable
1/2" x 1/2" x 1/4" NPT
3/4" x 3/4" x 1/4" NPT
1" x 1" x 1/4" NPT
1-1/4" x 1-1/4" x 1/4" NPT
1-1/2" x 1-1/2" x 1/4" NPT
2" x 2" 1/4" NPT
1" NPT Water Hammer Arrester
120 VAC Power
Relay 12 VDC @ <80mA (customer supplied option)
Remote monitoring
system connections
Solenoid valve (optional)
12 VDC, 10 Watts max
Water ow
Water hammer
arrester (optional)
(required, see
T
Tee tting
options)
General Information
Alarm System TempControl High Temperature Audio Visual Alarm System will monitor, alert and alarm when water temperature exceed preset limits. It ts applications where there is a critical need to accurately monitor and control warm or hot water temperature.
Operational Modes Programmable alarm control module features three operational modes: valve (normal) operation, caution(alert), and alarm (shutdown).
Set point range: 40°F - 149°F (4.5°C - 65°C)
Solenoid Valve (optional)- When alarmed, the valve is de-energized and closes to provide complete shut down of the water ow.
Relay (customer supplied option) Installed relay enables remote monitoring of alarm control module.
HTA-100 Alarm System Kit - includes the following:
a. Programmable alarm control module with two system
operation keys and stainless steel front panel b. Electrical mounting enclosure box; 4" x 4" c. Transformer; 120VAC, 12VAC/15VA, UL listed/CSA
certified class 2
d. Solid state temperature probe with 25' cable and 1/4"
NPT male compression fitting for attaching probe
coil connections
6V
12V
Transformer 12 VAC/15 VA
Alarm control module
25'probe cable (optional lengths)
Temperature probe and 1/4" NPT male tting
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667, (781)848-2250
©2010, 2013 Symmons Industries, Inc. ■ Printed in U.S.A. ■ www.symmons.com ■ customerservice@symmons.com ■ 032113
Fax: (800)961-9621, (781)664-1300
Loading...