Symmons Duro SLS-3610 series, Duro SLS-3612 series, Duro SLS-3612-1.5, Duro SLS-3610-1.5 Operation & Maintenance Manual

®

IAPMO R&T

CG

CG

Duro

SLS-3612-1.5, SLS-3610-1.5
Single Handle Lavatory Faucet

Operation & Maintenance Manual

Model Numbers Feature Highlights

SLS-3612

SLS-3610

SLS-3612-1.5 Single Handle Lavatory Faucet



with Metal Drain Assembly

SLS-3610-1.5 Single Handle Lavatory Faucet



Options/Modifications

-0.5 0.5 gpm (1.9 L/min) aerator



-1.0 1.0 gpm (3.8 L/min) aerator



-Delete



Suffix 1.5

-DP4 4" deck plate for single hole mount



Note: Append appropriate -sufx to model number.

2.2 gpm (8.3 L/min) aerator

faucets

Finish Modifications

-BBZ Brushed Bronze finish



-MB Matte Black finish



-STN Satin Nickel finish



Note: Append appropriate -sufx to model number.

• Single hole mount

• Quarter turn ceramic control cartridge

• Braided hose connections (3/8" compression)

• 6-7/8" height

• Metal drain assembly (SLS-3612 series only)

• Standard 1.5 gpm (5.7 L/min) aerator

• Shall be made from metal construction, plated
in standard polished chrome nish

Compliance

- ASME A112.18.1/CSA B125.1

- NSF/ANSI 61.9; NSF/ANSI 372

- WaterSense 1.5 gpm (5.7 L/min) only

c

Certied by

Warranty

Limited Lifetime - to the original end purchaser in

consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.

Dimensions

AA

CBB

Note: Dimensions subject to change without notice.

DD

FF

G

I

H

JJ

L

E

BACKSPLASHBACKSPLASH

KK

A 1-11/16", 43 mm

B

C 3/16", 5 mm
D 4-7/16", 113 mm
E Min. 1/2", 13 mm
F 8-7/16", 214 mm
G 6-7/8", 175 mm
H 5-5/16", 135 mm

J

K 24", 610 mm
L (2x) 3/8" compression tting

Measurements

Hole Size:

Min. Ø 1-1/4", 32 mm

Max. Ø 1-1/2", 38 mm

I 12°

Deck Thickness Ref.

Min. 7/8", 22 mm

Max. 2-1/2", 64 mm

Parts Breakdown

B

A

C

AA

BB

Z

F

D

E

X

J

Item Description Part Number

A
B
C

AA
BB

D

BB

D

F

J
K
T

KK Pop-up Assembly RL-154LR-11*

J Lift Rod RL-015*

Replacement Parts

Handle

Set Screw

Plug Button

Compression Nut

Limit Stop

Cartridge

Limit Stop

Cartridge

Aerator 2.2
Aerator 1.5
Aerator 1.0
Aerator 0.5

Lift Rod
Stopper

Ball Rod

LN-01416*

RL-069

RL-070

RL-059*
RL-063*
RL-064*
RL-065*

RL-014*

M

K Stopper RL-016*

G, H

K

L

OPTIONAL

Y

G

H

I

I

Y

Z Deck Plate RL-082*

*Note: Append appropriate nish -sufx to part number
for premium nish.

Mounting Gaskets (2x)

Fasteners

Supply Hose

RL-011

Tools Required

Adjustable wrench

W

N

O

S

P

Q

R

T

V

U

KK

Allen wrench 2.5mm

Plumber tape

Plumber putty

2

Installation

1) Insert faucet body (E) through
deck surface.

E

2) Slide mounting gasket (G) and
metal washer (H) on to fasteners (X).
Secure with mounting nuts (I).

X

1

G

H

I

2

Optional: Adjust limit stop washer

to limit handle turn to the
hot position if desirable.

2

_

1

4) Apply plumber putty to underside
of ange (L).

L

5) Insert ange (L) into drain
opening. From below, attach
drain body (Q) with gasket (M)
and washer (N) to ange (2-3
turns until hand tight).

L

OPTIONAL

+

3

6) From below, tighten ange nut (O)
to secure drain body (Q).
DO NOT overtighten.

O

Q

Note: Make sure ange is centered
in drain opening.

7) Insert stopper (K) into ange (L)
and rotate to proper position.

K

L

K

Non Removable

Note: Hoses removed for clarity.

3) Install plumber tape to inlets of
shut-off valves. Attach supply lines
to shut-off valves and hand tighten.
Using a wrench, nish with one­half turn. DO NOT overtighten.

1

1

2

1

2

M

Note: Make sure drain cavity (on
drain body) faces rear of sink.

3

N

3

Q

K

Removable

Removable

Note: Stopper can be installed
removable or non-removable
determined by eye hole position.

Installation

2

1

3

8) Insert pivot rod (T) into drain
body (Q) against gasket (P) and
inner seat (R). Install outer seat
(S) against pivot ball and secure
assembly by tightening retaining
nut (U).

T

P

1

S

R

Q

Note: Pivot rod passes under

stopper.

9) Insert lift rod (J) into back of
faucet body (E). From below,
attach clevis strap (W) to lift
rod (J). Tighten thumb screw to

10) With stopper in closed location,
insert pivot rod (T) into clevis
strap (W). Secure with spring
clip (V).

secure.

W

J

V

U

T

E

V

2

J

11) To adjust stopper, select

another hole in clevis strap or

W

loosen thumb screw to slightly
raise or lower lift rod.

12) Attach drain body to drain trap.

Troubleshooting Chart

Problem Cause Solution

Finish is spotting. Elements in water supply may cause

water staining on nish.

Faucet is leaking from handle

or faucet body.

Cartridge o-rings are worn or foreign

matter (dirt, chips) is lodged between

cartridge and o-rings.

Faucet no longer maintains desired

temperature.

Hard water deposits inside of

cartridge is preventing accurate mix

of hot and cold water.

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Clean nished trim area with a soft

cloth using mild soap and water or a

non-abrasive cleaner and then

quickly rinse with water.

Remove cartridge and inspect for

foreign matter. Replace cartridge

if necessary.

Soak cartridge in white vinegar for

1 hour to breakdown hard water

deposits, then rinse with water.

Replace cartridge if necessary.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]

Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-3030 REV F ■ 053118