Symmons Dia Series, Dia 352SH, Dia 352SH-3 Operation & Maintenance Manual

352SH, 352SH-3

IAPMO R&T

Dia™ Showerhead Series

Operation & Maintenance Manual

Model Number Specification

352SH

Dia 3” 1 Mode Showerhead

352SH-3

Dia 3” 3 Mode Showerhead

Modifications

-1.5

1.5 gpm (5.7 L/min) flow restrictor

-2.0

2.0 gpm (7.6 L/min) flow restrictor

-STN

Satin Nickel finish

Note: Append appropriate -sufx to model number.

Dimensions

352SH

B

B

AA

1 mode showerhead (352SH) and 3 mode
showerhead (352SH-3) include standard 2.5 gpm
(9.5 L/min) ow restrictors. Components made from
metal and nonmetallic materials plated in standard
polished chrome nish.

Compliance

-ASME A112.18.1; CSA B125.1

-WaterSense: 2.0 gpm (7.6 L/min) Max.

1.5 gpm (5.7 L/min) Min.

Certied by

c

Warranty

Limited Lifetime - to the original end purchaser in

consumer installations.
5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete
warranty information.

Measurements

A 4 1/4”, 108 mm
B 4 1/8”, 105 mm
C 4 3/4”, 121 mm
D 4 1/2”, 114 mm

Tools Required for Installation

352SH-3

Plumber tape

D

D

C

C

Notes: Dimensions subject to change without notice.

Installation Operation

2

1) Install showerhead to shower arm (not included)
turning clockwise to tighten.

1

Troubleshooting Chart

Finish is spotting. Elements in water supply may cause

water staining on nish.

Showerhead is leaking from shower

arm when valve is in “on” position.

Coupling connecting showerhead

to shower arm is cracked or washer

inside coupling is worn.

1) Turn showerhead to desired mode of operation.

Clean nished trim area with a soft

cloth using mild soap and water or a

non-abrasive cleaner and then quickly

rinse with water.

Inspect coupling and washer

and replace showerhead if

necessary.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]

©2015 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3046 REV A ■ 020415