Symmons Canterbury 45-458-TRM, Canterbury 45-460-TRM Operation And Maintenance Manual

45-458-TRM, 45-460-TRM
Canterbury

Operation & Maintenance Manual

Model Numbers Specifications

™

Diverter Trim Series

45-458-TRM Canterbury Dual Outlet

Diverter Trim

45-460-TRM Canterbury Triple Outlet

Diverter Trim

Dual and triple outlet diverter trim made from metal and
plastic materials plated in standard polished chrome
nish.

Modifications Compliance

-STN Satin nickel finish

-ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Note: Append appropriate -sufx to model number.

Refer to www.symmons.com/warranty for complete
warranty information.

Dimensions

A 5”, 127 mm

c

Measurements

AA

B

B

Note: Dimensions are subject to change without notice.

1

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3039 REV 0 01/15/2014

C

C

B 2 3/4”, 70 mm

C 4 3/4”, 121 mm

45-458-TRM, 45-460-TRM
Canterbury

Operation & Maintenance Manual

Parts Breakdown

C

A

B

™

Diverter Trim Series

H

E

D

F

G

Replacement Parts

Item Description Part Number

A
B
C

I

D
E

F
G

H

I

Note: Append -STN to part number for satin nickel
nish.

Cap

Screw

Star Washer

Handle

Lock Nut

Dome Cover

Escutcheon

Screw

Mounting Plate

Required for Installation

T-226

T-19/20-PL

T-531

Phillips head screwdriver

2

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3039 REV 0 01/15/2014

45-458-TRM, 45-460-TRM

2

2

3

Canterbury

Operation & Maintenance Manual

Installation Diverter Control

™

Diverter Trim Series

Note: For rough-in installation,
please see valve body installation
guide.

1) Install plastic mounting plate (I)
to diverter valve (45-458-TRM
diverter valve = 4-458E-BODY,
45-460-TRM diverter valve =
4-460E-BODY). Secure with two
screws (H).

I

1

H

2

2) Attach diverter escutcheon (G) to
small plastic mounting plate (I).

3) Install dome cover (F) to valve
and secure with lock nut (E).

F

1

E

4) Install diverter handle (D) to
valve and secure with star washer
(C) and screw (B). Attach plug
bottom (A) to handle.

D

1

C

B

1) Diverter handle facing straight
down is for diverter function 1.

2) 45-458-TRM: Turn diverter

handle counterclockwise one full
turn for diverter function 2.

45-460-TRM: Turn diverter

handle counterclockwise one
quarter turn for diverter function

45-458-TRM 45-460-TRM

2.

G

I

Note: Tabs should snap into place.

Care and Cleaning

1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.

3

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3039 REV 0 01/15/2014

A

Note: Handle should be facing the
6 o'clock position.

3) 45-460-TRM: Turn diverter
handle counterclockwise 3/4 turn
for diverter function 3.