Symmons C-96-400-B30-V-X User Manual
C-96-400-B30-V-X
4"
102mm min.
less stops
5 1/2"
140mm min.
with stops
2"
51mm
2 1/4"
58mm
7 3/8"
187mm
Male 1/2” I.P.S. thread must protrude 3/8” (10mm) from
finished wall for proper installation of street ell and flange.
Temptrol ® Tub and
Shower System with
Hand Spray
Temptrol Commercial Series Pressure-Balancing mixing valve with lever
handle, integral service stops and adjustable stop screw to limit handle
turn. Diverter tub spout, wall/hand shower with flexible metal hose, inline vacuum breaker, wall connection and flange. 30” slide bar for hand
shower mounting.
Modifications:
Suffix IPS: 1/2” female IPS connections
Suffix REV: Reverse coring, hot on right, cold on left, for back to back
installations
Suffix QD: Quick-disconnect for hand spray units
Suffix B48: 48” adjusting bar in place of standard 30” bar
SYMMONS PRODUCTS MEET
ANSI A112.18.1M, EPA ‘92
AND ALL KNOWN FLOW RATE
REQUIREMENTS.
Shower Heads and Hand Showers
2.5 GPM (9.5 L/min)
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250 ■ Fax (800) 9 6 1 - 9 6 21, (781) 8 4 3 - 3 8 4 9
Website: www.symmons. c o m ■ Email: c us t o me r s er v i c e @ sy m m on s . co m
Job/Location
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Engineer
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Contractor
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
This drawing to be used for roughin installation only. All floor to center
dimensions optional. Concealed piping
and fittings not furnished by manufacturer.
Dimensions are for ADA compliance
(Americans with Disabilities Act) consult
ADAAG or your state regulations for proper
product choice and mounting locations. For
complete installation, adjustment and service
information see installation instructions.
©2003, 2008 Symmons Industries, Inc. Printed in U.S.A. ■ 042508
Loading...