C-96-2-X
6 1/2"
164mm
4 5/8"
116mm
approx.
40"
1016mm
7 3/8"
187mm
4"
102mm min.
less stops
5 1/2"
140mm min.
with stops
2"
51mm
2 1/4"
58mm
Temptrol ® Tub and
Shower System
Temptrol Commercial Series Pressure-Balancing mixing valve with lever
handle, integral service stops, built-in choke and adjustable stop screw
to limit handle turn. Diverter tub spout, cast brass adjustable spray
shower head with arm and flange.
Modifications:
Suffix IPS: 1/2” female IPS connections
Suffix REV: Reverse coring, hot on right, cold on left, for back to back
installations
Suffix SS: Slip-on type tub spout in place of standard tub spout
SYMMONS PRODUCTS MEET
ANSI A112.18.1M, EPA ‘92
AND ALL KNOWN FLOW RATE
REQUIREMENTS.
Shower Heads and Hand Showers
2.5 GPM (9.5 L/min)
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250 ■ Fax (800) 9 6 1 - 9 6 21, (781) 8 4 3 - 3 8 4 9
Website: www.symmons. c o m ■ Email: c us t o me r s er v i c e @ sy m m on s . co m
Job/Location
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Engineer
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Contractor
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
This drawing to be used for rough-in installation
only. All floor to center dimensions optional.
Concealed piping and fittings not furnished by
manufacturer. For ADA compliance (Americans
with Disabilities Act) consult ADAAG or your
state regulations for proper product choice and
mounting locations. For complete installation,
adjustment and service information see installation instructions.
©2003, 2008 Symmons Industries, Inc. Printed in U.S.A. ■ 042408