Symmons C-96-1-X User Manual
C-96-1-X
6 1/2"
164mm
4 5/8"
116mm
7 3/8"
187mm
4"
102mm min.
less stops
5 1/2"
140mm min.
with stops
5/8"
16mm
1/2"
13mm
1/2"
13mm
1/2"
13mm
2"
51mm
approx.
24"
610mm
approx.
48"
1219mm
shower
discharge
finished wall
hot and
cold inlets
adjustment
floor line
Temptrol ® Shower System
Temptrol Commercial Series Pressure-Balancing mixing valve with lever
handle, integral service stops and adjustable stop screw to limit handle
turn. Cast brass adjustable spray shower head with arm and flange.
Modifications:
Suffix IPS: 1/2” female IPS connections
Suffix REV: Reverse coring, hot on right, cold on left, for back to back
installations
SYMMONS PRODUCTS MEET
ANSI A112.18.1M, EPA ‘92
AND ALL KNOWN FLOW RATE
REQUIREMENTS.
Shower Heads and Hand Showers
2.5 GPM (9.5 L/min)
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250 ■ Fax (800) 9 6 1 - 9 6 21, (781) 8 4 3 - 3 8 4 9
Website: www.symmons. c o m ■ Email: c us t o me r s er v i c e @ sy m m on s . co m
Job/Location
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Engineer
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Contractor
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
This drawing to be used for rough-in installation
only. All floor to center dimensions optional.
Concealed piping and fittings not furnished by
manufacturer. For ADA compliance (Americans
with Disabilities Act) consult ADAAG or your
state regulations for proper product choice and
mounting locations. For complete installation,
adjustment and service information see installation instructions.
©2003, 2008 Symmons Industries, Inc. Printed in U.S.A. ■ 042408
Loading...