Symmons 7-210-CK User Manual

7-210-CK
Maxline

Specification Submittal

Model Number

7-210-CK

Connections: 3/8” compression
fittings

Modifications

-B

-D

-NI

-T

-W

Note: Append appropriate -sufx to model number.

Wall cabinet in white enamel finish
including wall mounting bracket

3/8” compression fitting to allow water
bypass for hot and cold supply faucet

Nickel plated

Stainless steel cabinet in place of
standard white cabinet

Wall mounting bracket

Compliance

-ASME A112.18.1; CSA B125.1

Specification

Water temperature limiting valve including integral
checks and dual stainless steel strainers for double
protection against suspended particles in supply
lines. Valve made from lead free* metal components
(see table 1 for ow rates).

Temperature control range:

59°F - 113°F (15°C - 45°C)

Minimum supply pressure: 20 psi (138 kPa)
Maximum supply pressure: 125 psi (862 kPa)
Inlet to outlet temperature differential: 10°F (5.55°C)

*According to US Senate bill S.3874, the term “lead free” is dened as
follows: “not more than a weighted average of 0.25 percent lead when
used with respect to the wetted surfaces of pipes, pipe ttings, plumbing
ttings, and xtures”

Warranty

5 Years - for commercial installations.

-ASSE 1017; CSA B125.3

-ASSE 1070; CSA B125.3

-CA 116875 (AB 1953)

-NSF/ANSI 61.9; NSF/ANSI 372

-US S.3874

Valve Model

7-210-CK

Size

Connection

3/8”

Compression

(10 mm)

Min. Flow

Rate

0.5 gpm

(1.9 L/min)

Refer to www.symmons.com/warranty for complete
warranty information.

c

Table 1: Flow Rate - gpm (L/min)

Pressure Differential - psi (kPa)

5 psi

(34 kPa)

1.0 gpm

(3.8 L/min)

10 psi

(69 kPa)

2.0 gpm

(7.6 L/min)

20 psi

(138 kPa)

3.0 gpm

(11.4 L/min)

25 psi

(172 kPa)

3.5 gpm

(13.3 L/min)

30 psi

(207 kPa)

4.0 gpm

(15.2 L/min)

45 psi

(310 kPa)

5.0 gpm

(19.0 L/min)

1

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-1153 REV D 05/27/14

7-210-CK
Maxline

Specification Submittal

Dimensions

B

C

A

Measurements 7-210-CK

A 4 1/2”, 114 mm

B 5 1/4”, 133 mm

C 2”, 51 mm

D 2 1/2”, 64 mm

D

Note: Dimensions are subject to change without notice.

2

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc.■ www.symmons.com ■ [e-mail] ■ ZV-1153 REV D 05/27/14