Page 1
Location:
Print
Email
Reset Form
Lig-Res
Diverter Valve Trim 57-458-TRM
Ligature Resistant
Specification Submittal
Feature Highlights
■ Dual Outlet Diverter Valve Trim with ligature
resistant knob
■ Trim is used with Symmons dual-port diverter valve
■ Vandal resistant screws
■ Metal construction
■ Polished chrome nish (standard)
Model Numbers
57-458-TRM
Dual outlet diverter valve trim
(diverter valve not included)
Finish Options / Modifications
Append appropriate -sux to model number
-
Polished Chrome (standard nish)
Disclaimers
■ Product is designed to reduce likelihood that unit
could be used as a device for hanging.
■ Product is not a substitute for the evaluation, treatment
or appropriate supervision of persons at risk of suicide
Warranty
■ Limited Lifetime - to the original end purchaser in
consumer installations.
■ 5 years - for commercial installations
Standards / Certifications
ASME A112.18.1-2005/CSA B125.1-05
™
Dimensions Lig-Res Diverter Valve Trim, 57-458-TRM
nished wall
2-1/2" (64 mm) min
3-5/8" (92 mm) max*
5-5/8" dia
(143 mm)
3-1/2" (89 mm) max
2-3/4" (70 mm) min
Notes:
(1) Dimensions identied with an asterisk (
without primary mixing control valve.
When diverter valve is coupled with a primary mixing control valve, then dimen-
sion is determined by rough-in drawing provided with mixing control valve.
(2) Dimensions subject to change without notice
Symmons Industries, Inc. 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667, (781)848-2250 ■ Fax: (800)961-9621, (781)664-1300
©2012 Symmons Industries, Inc. Printed in U.S.A. ■ www.symmons.com ■ customerservice@symmons.com ■ 080312
3-7/8" (98 mm) max
*
Hole size
3" (76 mm) min
*
*
) apply when diverter valve is installed
4-1/4" (108 mm) min
5-3/8" (137 mm) max
Diverter valve
(dual port)
1-1/4" (32 mm)
*
*
*
Loading...