Page 1
542TS, 542TSD
Degas
Operation & Maintenance Manual
Model Numbers Specifications
™
Tub Spout Series
542TS Degas Non-Diverter Tub Spout
542TSD Degas Diverter Tub Spout
8" diverter tub spout (542TS) and 8 1/8" non-diverter
tub spout (542TSD) made from brass materials plated in
standard polished chrome nish.
Modifications Warranty
-ORB Oil rubbed bronze
-STN Satin nickel finish
Note: Append appropriate -sufx to model number.
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Dimensions
A Ø 2 1/2”, 64 mm
542TS
AA
B
B
B 1/2”, 13 mm
C 8 1/8”, 206 mm
D 1/2”-14 NPT
E 8”, 203 mm
Measurements
C
C
542TSD
B
AA
B
EE
Note: Dimensions are subject to change without notice.
1
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ gethelp@symmons.com ■ ZV-3044 REV 0 01/15/2014
Required for Installation
DD
D
D
Teon Tape
Page 2
542TS, 542TSD
2
Degas
Operation & Maintenance Manual
Installation Diverter Control
™
Tub Spout Series
1) Install tub spout to stub out pipe. Turn clockwise to
secure.
1
Note: 542TSD only.
1) Diverter lever in down position for tub spout operation.
2) Diverter lever in up position for shower operation.
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
2
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ gethelp@symmons.com ■ ZV-3044 REV 0 01/15/2014
Loading...