
532TS, 532TSD
Museo
Operation & Maintenance Manual
Model Numbers Specifications
™
Tub Spout Series
532TS Museo Non-Diverter Tub Spout
532TSD Museo Diverter Tub Spout
7 1/8" non-diverter tub spout (532TS) and 7 1/8" diverter
tub spout (532TSD) made from brass materials plated in
standard polished chrome nish.
Modifications Compliance
-BLK Polished graphite finish
-STN Satin nickel finish
-ASME A112.18.1/CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Note: Append appropriate -sufx to model number.
Refer to www.symmons.com/warranty for complete
warranty information.
Dimensions
532TS
A Ø 2 1/2”, 63 mm
A
A
B
B
B 1/2”, 13 mm
c
Measurements
CC
532TSD
A
A
B
B
CC
Note: Dimensions are subject to change without notice.
1
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ gethelp@symmons.com ■ ZV-3042 REV 0 01/15/2014
C 7 1/8”
D 1/2” - 14 NPT
D
D
Teon Tape
D
D
Required for Installation

532TS, 532TSD
Museo
Operation & Maintenance Manual
Installation Diverter Control
™
Tub Spout Series
1) Install tub spout to elbow. Turn clockwise to secure.
1
Note: 532TSD only.
1) Diverter lever in down position for tub spout operation.
2) Diverter lever in up position for shower operation.
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
2
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ gethelp@symmons.com ■ ZV-3042 REV 001/15/2014