Page 1
Location:
Print
Email
Reset Form
Lucett a
Shower System 4605
Specification Submittal
Feature Highlights
■ Symmons Shower System
■ Symmons Temptrol® pressure balancing mixing valve with
adjustable stop screw to limit handle turn
■ Integral push-button diverter
■ Wall/hand shower with 5 foot exible metal hose, in-line
vacuum breaker, wall connection and cradle for hand
shower mounting
■ 6 inch rain showerhead #4-163 with mounting arm
■ Flow rate 2.5 gpm (9.5 L/min) for both shower head and
hand shower
■ Metal construction with polished chrome nish
Model Numbers
4605 ..................
Finish Options / Modifications
Append appropriate -sux to model number
Shower System with Symmons
Temptro l® mixing valve and diverter
assembly
-STN
Satin nickel
-
Polished chrome (standard)
™
Options / Modifications
Append appropriate -sux to model number
-REV
-L/HD
L/HS
Service Stops: Temptrol® mixing valve
-X
includes integral service stops to allow water
Reverse coring in valve for back to back
installations; hot on right, cold on le,
(available with -X integral stops only)
2.0 (7.6 L/min) ow rate restrictor
-2.0
Showerhead not included
(Includes showerhead arm only)
Hand Shower wand not included
(Includes hose, in-line vacuum breaker, wall
connections and ange only)
Vinyl hose in place of exible metal hose
-R
6 foot hose in place of standard 5 foot hose
-72
Quick-disconnect at hand shower wall connection
-QD
Standards / Certifications
ASME A112.18.1-2005/CSA B125.1-05
Warranty
■ Limited Lifetime - to the original end purchaser in
consumer installations.
■ 5 years - for commercial installations
Page 2
Dimensions Lucetta shower system, 4605
1/2" (12 mm)
Hole size
1" (25 mm) max.
Threads 1/2" IPS
diameter
6"
(153 mm)
Mount elbow
either side of
center approx.
6"
152 mm
2-1/8"
53 mm
2-1/2"
65 mm
5-1/2"
138 mm
Screw into backing
using 1-3/4" pan head
screws with wall anchors.
snap-off
snap-on
cover
1/4"
(6 mm)
1-7/8"
48 mm
10-5/8"
270 mm
nished wall
approx. 35"
889 mm
Hole size
1" (25 mm) max.
Threads 1/2" IPS
handspray
supply
10-3/4"
273 mm
HOT
supply
(138 mm)
6-7/16"
(173 mm)
Valve & diverter assembly
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250 ■ Fax (800) 961-9621, (781) 664-1300
Website: www.symmons.com ■ Email: customerservice@symmons.com
©2008 Symmons Industries, Inc. Printed in U.S.A. ■ 090710
6-1/2"
165 mm
5-7/16"
5-1/2"
138 mm
COLD
supply
Front
view
2-5/16"
59 mm
Hole size
3" (76 mm) min.
4" (102 mm) max.
Hole size
3" (76 mm) min.
4" (107 mm) max.
1-3/4" (43 mm)
2-3/8" (60 mm)
Adjust ± 1/2" (13 mm)
Wall thickness when
using mounting plates
1/4" to 1-1/4"
(1.6 mm to 19 mm)
Diverter
shower
supply
Control
valve
Mounting plate
(optional for walls
greater than 3/4")
approx. 32"
1067 mm
Floor
Loading...