Symmons 1-901-FSB User Manual

®

HYDAPIPE

Surface Mounted Shower System

1-901S-FSB: Through wall piping configuration with soap dish
1-901-FSB: Through wall piping configuration less soap dish

Pressure Balancing mixing valve with screw driver service stops and adjust­able stop screw to limit handle turn. Wall/hand shower with flexible 5’
metal hose with in-line vacuum breaker, wall connection and flange. 30”
slide bar for hand shower mounting. Attached soap dish and sloped metal
top cap. Stainless steel covering to be 18 gauge with #4 brush finish.

Modifications:

Valve:

Suffix 21: Single supply, manual shut off, 4 arm handle

Suffix 22: Single supply, manual shut off, lever handle

Suffix 60: Single supply, metering shut off (not ADA compliant)

Suffix 56: Pressure Balance and metering combination

Soap dish:

Suffix RS: Recessed soap dish

Suffix CWM: Wall mounted cake soap dish

Hand spray accessories:

Suffix FS: Hand spray, hose and wall hook (in lieu of Suffix FSB)

Suffix QD: Quick disconnect for hand spray units

Suffix R: White vinyl hose in lieu of metal hose

SYMMONS PRODUCTS MEET

ANSI A112.18.1M, EPA ‘92

AND ALL KNOWN FLOW RATE

REQUIREMENTS.

Shower Heads and Hand Showers

2.5 GPM (9.5 L/min)

Seat and Grab bars*:

Suffix HC1: Slat seat and two wall grab bar (right hand)

Suffix HC2: Slat seat and two wall grab bar (left hand)

Suffix HC3: Padded seat and two wall grab bar (right hand)

Suffix HC4: Padded seat and two wall grab bar (left hand)

*ADA requirements state that the seat shall be located opposite the controls.

This will require the construction of a partial wall, or use of a reinforced partition

for mounting the folding seat. Construction of a partial wall or reinforced partition

to be provided by others.

Job/Location

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

Engineer

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

Contractor

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

For ADA compliance (Americans with
Disabilities Act) consult ADAAG or your
state regulations for proper product choice
and mounting locations.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
[phone], [phone] ■ Fax (800) 9 6 1 - 9 6 21, (781) 8 4 3 - 3 8 4 9
Website: www.symmons. c o m ■ Email: c us t o me r s er v i c e @ sy m m on s . co m

©2003, 2008 Symmons Industries, Inc. Printed in U.S.A. ■ 043008