Symmons 1-7480-X-CHKS User Manual

Download

Page 1

1-7480-X-CHKS

127mm

6 1/2''

165mm

12''

305mm

2 5/8" 67mm

15"

381mm

approx.

40"

1016mm

approx.

41"

1041mm

approx.

30"

762mm

7/8"

22mm

11/16" 17mm

approx.

36"

914mm

12"

305mm

12"

305mm

1/4'' 6mm

1/4"

6mm

1/2"

3/4"

approx. 8"-203mm right or left

24 5/8" 625mm

25 1/2" 648mm

finished wall

hot and cold inlets

shower discharge

floor line

Male 1/2'' I.P.S. thread must protrude 7/8''

(22mm) from finished wall for proper

installation of street ell and flange.

adjustment

proper backing

screw bar support into stud or install

All piping including valve inlets and outlets 3/4" except where noted otherwise.

Water Dance ® Two Wall Shower System

Water Dance System includes High-Flo™ Pressure-Balancing shower valve with integral check stops, metal ﬁnish insert lever handle and adjustable stop screw to limit handle turn. Three individual volume control valves to control each outlet type. Euro-Flo three mode shower head with arm and ﬂange. Three Euro-Flo adjustable body sprays. Euro-Flo three mode wall/hand shower with ﬂexible metal hose, in-line vacuum breaker, wall connection and ﬂange. 24” slide bar for hand shower mounting.

SYMMONS PRODUCTS MEET

ANSI A112.18.1M, EPA ‘92

AND ALL KNOWN FLOW RATE

REQUIREMENTS.

Shower Heads and Hand Showers

2.5 GPM (9.5 L/min)

Job/Location

. . . . . . . . . . . . . . . . . . . . . . . . . .

Engineer

. . . . . . . . . . . . . . . . . . . . . . . . . .

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 (800) 796-6667, (781) 848-2250 ■ Fax (800) 9 6 1 - 9 6 21, (781) 8 4 3 - 3 8 4 9 Website: www.symmons. c o m ■ Email: c us t o me r s er v i c e @ sy m m on s . co m

. . . . . . . . . . . . . . . . . . . . . . . . . .

Contractor

. . . . . . . . . . . . . . . . . . . . . . . . . .

This drawing to be used for rough-in installation only. All ﬂoor to center dimensions optional. Concealed piping and ﬁttings not furnished by manufacturer. For ADA compliance (Americans with Disabilities Act) consult ADAAG or your state regulations for proper product choice and mounting locations. For complete installation, adjustment and service information see installation instructions.