Page 1
1-317VT-FS
Visu-Temp ® Tub and
Shower System with
Hand Spray
Visu-Temp® Pressure-Balancing mixing valve with integral thermometer
and adjustable stop screw to limit handle turn. Lever diverter with volume control for shower head, hand spray and tub spout. Super shower
head with arm and flange. Tub spout. Wall/hand shower with flexible
5’ metal hose, in-line vacuum breaker, wall connection and flange. Wall
hook for hand shower mounting.
Modifications:
Suffix X: Integral service stops—allows water shut-off at valve for
service
Suffix X-3/4 3/4” valve to increase flow approximately 20%
Male 1/2" IPS thread must protrude
3/8" (10 mm) from nished wall for proper
installation of street ell and ange.
5-5/8"
(143 mm)
Screw wall hook
into stud or install
proper backing.
nished
wall
shower
discharge
SYMMONS PRODUCTS MEET
ASME A112.18.1
AND ALL KNOWN FLOW RATE
REQUIREMENTS.
Shower Heads and Hand Showers
2.5 GPM (9.5 L/min)
6"
(152 mm)
to suit
5" (127 mm)
min. without stops
7" (178 mm)
min. with stops
Note:
2-3/8" (60 mm) min. 3" (76 mm) max.
2-5/16" (59 mm) xed dim. metal stall.
Valve inlets and outlets are 1/2" (13 mm)
IPS connections.
approx.
36"
(914 mm)
approx.
(1067 mm)
oor line
42"
9-1/2"
(240 mm)
7"
(178 mm)
min.
hot and
22"
cold inlets
(559 mm)
see note
4"
(101 mm)
Note: Dimensions subject to
change without notice.
3-1/2"
(89 mm)
Job/Location
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Engineer
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Contractor
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
This drawing to be used for rough-in installation
only. All floor to center dimensions optional.
Concealed piping and fittings not furnished by
manufacturer. For ADA compliance (Americans
with Disabilities Act) consult ADAAG or your
state regulations for proper product choice and
mounting locations. For complete installation,
adjustment and service information see installation instructions.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
Phone: (800) 796-6667
www.symmons.com
Copyright © 2015 Symmons Industries, Inc.
■ Fax: (800) 961-9621
■ gethelp@symmons.com
■ ZV-1440 REV A ■ 090515
Loading...