Symmons 1-210VT User Manual

1-210VT

Visu-Temp ® Tub and
Shower System

Visu-Temp Pressure-Balancing mixing valve with integral thermometer
and adjustable stop screw to limit handle turn. Push-button diverter
with volume control for shower head. Super shower head with arm
and flange. Tub spout.

Modifications:

Suffix X: Integral service stops—allows water shut-off at valve for

service

Suffix X-3/4 3/4” valve to increase flow approximately 20%

SYMMONS PRODUCTS MEET

ANSI A112.18.1M, EPA ‘92

AND ALL KNOWN FLOW RATE

REQUIREMENTS.

Shower Heads and Hand Showers

2.5 GPM (9.5 L/min)

5 5/8”
143mm

9 1/2”
240mm

NOTE: 2-1/2” (64mm) min.
3” (76mm) max. On 2”x4”
construction, use 2-1/2”
(64mm) min. rough-in.
Valve inlets and outlets are
1/2” (13mm) IPS connections.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
[phone], [phone] ■ Fax [phone]
Website: www.symmons.com ■ Email: [e-mail]

Job/Location

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

Engineer

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

Contractor

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

This drawing to be used for rough-in installation
only. All floor to center dimensions optional.
Concealed piping and fittings not furnished by
manufacturer. For ADA compliance (Americans
with Disabilities Act) consult ADAAG or your
state regulations for proper product choice and
mounting locations. For complete installation,
adjustment and service information see installa­tion instructions.

©2010 Symmons Industries, Inc. Printed in U.S.A. ■ 082610