Symmons 1-2100VT User Manual

1-2100VT
Note: 2-1/2" (64 mm) min. 3" (76 mm) max. On 2" x 4" construction, use 2-1/2" (64 mm) min. rough-in.
Note: Dimensions subject to change without notice.
shower discharge
3-1/2"
(89 mm)
5" (127 mm) min. without
stops
7" (178 mm)
min. with stops
approx.
42"
(1067 mm)
oor line
22"
(559 mm)
7"
(178 mm)
min.
5-3/8"
(137 mm)
approx. 35-3/8"
(899 mm)
8-1/2"
(215 mm)
4"
(101 mm)
nished wall
see note
hot and cold inlets
Visu-Temp ® Tub and Shower System
Visu-Temp® Pressure-Balancing mixing valve with Clear-Vue™ thermometer and adjustable stop screw to limit handle turn. Lever diverter with volume control for shower head. Euro-Flo single mode shower head with arm and flange. Tub spout. Polished chrome finish.
Modifications:
Suffix BRS: Radiance® polished brass finish
®
Suffix PCB: Polished chrome and Radiance
®
Suffix STN: Radiance
satin finish
Suffix X: Integral service stops—allows water shut-off at valve for service
Suffix X-3/4 3/4” valve to increase flow approximately 20%
polished brass finish
SYMMONS PRODUCTS MEET
ASME A112.18.1
AND ALL KNOWN FLOW RATE
REQUIREMENTS.
Shower Heads and Hand Showers
2.5 GPM (9.5 L/min)
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 www.symmons.com
gethelp@symmons.com
Job/Location
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Engineer
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Contractor
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
This drawing to be used for rough-in installation only. All floor to center dimensions optional. Concealed piping and fittings not furnished by manufacturer. For ADA compliance (Americans with Disabilities Act) consult ADAAG or your state regulations for proper product choice and mounting locations. For complete installation, adjustment and service information see installa­tion instructions.
Copyright © 2015 Symmons Industries, Inc.
ZV-1445 REV A 090115
Loading...