Symmons 1-210 User Manual

1-210

Safetymix ® Tub and
Shower System

Safetymix Pressure-Balancing mixing valve with lever handle and adjust­able stop screw to limit handle turn. Push-button diverter with volume
control for shower head. Super shower head with arm and flange. Tub
spout.

Modifications:

Suffix X: Integral service stops—allows water shut-off at valve for

service

Suffix X-3/4: 3/4” valve to increase flow approximately 20%

5 5/8”
143mm

9 1/2”
240mm

approx.
30”
610mm

SYMMONS PRODUCTS MEET

ANSI A112.18.1M, EPA ‘92

AND ALL KNOWN FLOW RATE

REQUIREMENTS.

Shower Heads and Hand Showers

2.5 GPM (9.5 L/min)

Job/Location

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

Engineer

NOTE: 2-3/8” (60mm) min.
3” (76mm) max. 2-5/16” (59mm)
fixed dim. metal stall.
Valve inlets and outlets are
1/2” (13mm) IPS connections.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
[phone], [phone] ■ Fax [phone]
Website: www.symmons.com ■ Email: [e-mail]

©2010 Symmons Industries, Inc. Printed in U.S.A. ■ 082610

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

Contractor

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

This drawing to be used for rough-in installation
only. All floor to center dimensions optional.
Concealed piping and fittings not furnished by
manufacturer. For ADA compliance (Americans
with Disabilities Act) consult ADAAG or your
state regulations for proper product choice and
mounting locations. For complete installation,
adjustment and service information see installa­tion instructions.