Symmons 1-100-295 User Manual

1-100-295

Safetymix ® Shower
System

Safetymix Pressure-Balancing mixing valve with lever handle and adjust­able stop screw to limit handle turn. Fre-Flo shower head with adjust­able spray. Nozzle-type design for maximum protection against hard
water mineral build-up. All mounting fasteners for head are vandal
resistant recessed hex socket type.

Modifications:

Suffix X: Integral service stops—allows water shut-off at valve for

service

Suffix X-3/4: 3/4” valve to increase flow approximately 20%

Suffix X-REV: Reverse coring, hot on right, cold on left, for back to back

installations with integral stops only

Suffix BB: Back plate and thru bolts for Fre-Flo, Senior, and Universal

shower heads to accomodate extra thick wall up to 6”
(Specify dimension for thicker wall)

Suffix 15: Space saving 15˚ spray angle showerhead

SYMMONS PRODUCTS MEET

ANSI A112.18.1M, EPA ‘92

AND ALL KNOWN FLOW RATE

REQUIREMENTS.

Shower Heads and Hand Showers

2.5 GPM (9.5 L/min)

NOTE: 2-3/8” (60mm) min.
3” (76mm) max. 2-5/16” (59mm)
fixed dim. metal stall.
Valve inlets and outlets are
1/2” (13mm) IPS connections.

Job/Location

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

Engineer

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

Contractor

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

This drawing to be used for rough-in installation
only. All floor to center dimensions optional.
Concealed piping and fittings not furnished by
manufacturer. For ADA compliance (Americans
with Disabilities Act) consult ADAAG or your
state regulations for proper product choice and
mounting locations. For complete installation,
adjustment and service information see installa­tion instructions.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
[phone], [phone] ■ Fax [phone]
Website: www.symmons.com ■ Email: [e-mail]

©2010 Symmons Industries, Inc. Printed in U.S.A. ■ 082610