Symmetrikit Meywalk 4 Series, Meywalk 4 Micro, Meywalk 4 Mini, Meywalk 4 Small, Meywalk 4 Medium User Handbook Manual
...
User Handbook
CONTENTS
Introduction
CE marking and labels
Safety precautions
Prior to rst use
Meywalk®4 part names
Warranty
Assembly
3
3
4
5
6
7
8
Adjustments
Cleaning and maintenance
Recycling
Disposal
Pre-assessment
Technical specications
Meywalk®4 accessories
10
18
18
18
20
21
22
2
INTRODUCTION
Meywalk® 4 Micro, Mini, Small, Medium and Large are primarily designed for young children, youths
and adults who have diculty walking without support. The user-friendly Meywalk®4 is designed
for indoor and outdoor use. The maximum permitted body weight of the user is: Micro - 60kg, Mini
- 80 kg, Small - 100 kg and Medium and Large - 130 kg.
With the Meywalk®4 you have purchased one of the best walkers available. A higher standard is
reached due to its unique design and high-quality materials. You will be impressed by the multiple
functions:
• Meywalk®4 follows individual body movements and walking patterns.
• Helps the user keep his/her torso upright and makes the user feel safe.
• The handlebar supports the user’s arms and reduces the strain on them.
• The seat can be lowered when getting in and out.
• The rear stop helps with keeping the user comfortably seated.
• The integrated springs and dynamic seat support the walking function.
CE marking and labels
The type and manufacturer label is placed on the bottom frame. Labels must always be readable.
Replace any unreadable or missing labels as soon as possible. The type and manufacturer label is
important for the identication of the product and may not be removed.
The Meywalk®4 is CE marked. This guarantees that the Meywalk®4 is in compliance with all relevant
safety requirements specied in Council Directive 93/42/EEC on medical devices. The Meywalk®4
was tested by Berlin Cert, Prüf- und Zertizierstelle für Medizinprodukte GmbH, at the Berlin Technical
University.
3
SAFETY PRECAUTIONS
• Never leave the user in Meywalk®4 unattended! Meywalk®4 is a therapy
product and should only be used as such!
• The spring system of Meywalk®4 may involve a risk of the walking aid toppling
over if used by a very restless user.
• Meywalk®4 rolls very easily and you should always consider potential dangers
that the user may get access to.
• Always hold the tilt bar securely when a user is being lifted or lowered. Especially
when opening the tilt bar to lower the user, you must be prepared for the
upward force which gradually increases as the tilt bar rises.
• Never let go of the tilt bar in the middle of a lifting or lowering operation, even
if taken by surprise by the heavy weight loading.
• Be aware of the higher risk of squeezing your ngers when adjusting the
walker.
• If ttings are removed, open tube ends may be revealed. These may have sharp
inner edges and may be dangerous for probing ngers. However, Meywalk®4
and its accessories are designed to avoid open ends! If a situation with open
tube ends should ever arise, it is recommended that they are closed o with
plastic plugs.
• Polyurethane foam and foam tubing may not be consumed.
• Please be aware that the upholstery heats up if placed in direct sun light. This
can cause skin damage if the upholstery is touched. Therefore, cover up the
upholstery parts or protect the walker from direct sun light.
• The walker should only be used on level and rm ooring. Avoid loose surfaces
such as gravel, sand or foliage. Be aware of unevenness and holes in the ooring
as there is a risk of toppling over or getting stuck. Be especially careful on wet or
icy surfaces as the risk of slipping is considerably higher.
4
• Check that all parts are securely fastened before using the walker.
• Do not use high-pressure cleaning tools or caustic chemicals when cleaning the
walker.
• Unlike previous generations of Meywalk® Walkers, the Meywalk®4 is now
equipped with drag brakes, non-reverse brakes and front wheel swivel-locks as
standard.
• The product is not made with natural rubber latex.
Prior to rst use
Meywalk®4 is supplied almost fully assembled. Please check that the package contains the following
parts:
• Bottom frame with wheels and brakes.
• Top part with seat and trunk support.
• A set of springs according to the user’s body weight.
• Accessories as ordered.
5
Meywalk®4 parts
Trunk support
height adjustment
Handlebar
Trunk support
Swing bar, not
for Mini model
Tilt function
Seat height
adjustment
Seat with
rear stop
Spanner grip for
adjustment of
upper tube
Brakes
Rear wheels
Fender
wheel
6
Front wheels
WARRANTY
Warranty is granted on all defects that are proven to be caused
by material or manufacturer fault. The warranty period is 24
months from the time of dispatch readiness alternatively time
of delivery. The warranty does not cover any damage due to
normal wear and tear, intentional, negligent or inexpedient
handling or use. This also applies if using unsuitable detergents
and lubricants.
7
ASSEMBLY
Joining the top part and bottom frame
Place the top part in the tubes on the bottom
frame. Remember to position the top part so
that the handlebar points in the direction of
the swivelling front wheels.
Spring loading
The two springs inside the tubes can be changed to obtain harder or softer suspension. As a
guideline, the springs should be fully compressed by the body weight of the user. There are
seven dierent spring hardness levels corresponding to the following body weight:
Orange 10 -15 kg
Purple 15 - 20 kg
White 20 - 50 kg
Yellow 45 - 65 kg
Blue 65 - 80 kg
Red 80 - 100 kg
Silver 100 - 130 kg
8
Loading...