Symcom PC-102CICI-DL Catalog Page

Pump Controller with Dual seal-Leak Inputs

SymCom’s PC-102CICI-DL is a Dual seal­Leak detector.

The inputs are used to sense seal failures on
pumps. When water is detected, the
associated output relay is energized.

The input logic may be selected to be direct or
inverted using DIP switches on the side of the
device.

It has two isolated form-C output relays and
two red LEDs which illuminate when the
associated output relay is energized.

”

”

PC-102

”

”

”

Model PC-102CICI-DL

[e-mail] / [e-mail]

[phone] / [phone] / Fax [phone]

Specifications

Functional Specifications:

Adjustments/Settings
Sensitivity (for resistive probes)
Input Logic
Debounce Time Delay

Input Characteristics:

Supply Voltage:
Frequency:

Output Characteristics:

Relay Output Rating:
2 Form C (isolated)

Depluggable Connector (included)
LEDs (red)

General Characteristics:

Operating Temperature:
Terminals:
Wire Size
Torque
Standards Passed:
Electrostatic Discharge (ESD)
Radio Frequency Immunity (RFI)
Fast Transients

Safety Marks:
UL
cUL
Dimensions:
Weight:
Mounting Methods:

4.7k–100kΩ
Direct or inverted

0.5 or 2 seconds

120VAC nominal
50/60 Hz

5Amps @ 240VAC General Purpose
Pilot Duty 180VA @ 120VAC, C150
Phoenix Contact - Series MSTB plugs (or equivalent)
Output Relay Status Indicators

-20 to 55

12-20 AWG
6 in.-lbs. (max.)

IEC 61000-4-2, Level 3, 6 kV contact, 8 kV air
IEC 61000-4-2, Level 3, 10V/m
IEC 61000-4-4, Level 3, 4 kV power terminals, 2kV
input/output terminals

UL508 (File #E68520)
C22.2 No. 14
(LxWxD) 3.5” x 2.1” x 3.2” (D w/out connector – 2.4”)
9 oz.
35 mm DIN rail or
Surface Mount (#6 or #8 screws)

°

C

How to order:

Part Number: PC-102CICI-DL

[e-mail] / [e-mail]

[phone] / [phone] / Fax [phone]