Symcom 201-XXX-SP Catalog Page

Single-Phase Voltage Monitor

Model 201-XXX-SP

Features:

• Low voltage protection

• Low & high voltage protection model

available

• Diagnostic LED

• UL508 listed

• CE Marked

• 8-pin plug in; DIN rail or surface mount

• 5-year warranty

• Made in USA

The Model 201-xxx-SP is an 8-pin octal base plug-in voltage moni­tor designed to protect single-phase motors regardless of size. It
can be used on 95-120VAC (201-100-SP) or 190-240VAC (201-200­SP) motors to prevent damage caused by low voltage. High voltage
detection is included on the 201-200-SP-T-9 model.

The unique microcontroller-based voltage and voltage-sensing cir­cuit constantly monitors the voltage to detect harmful power line
conditions. When a harmful condition is detected, the MotorSaver’s

output relay is deactivated after a specied trip delay. The output

relay reactivates after power line conditions return to an acceptable

level and a specied amount of time has elapsed (restart delay).
The trip delay prevents nuisance tripping due to rapidly uctuat-

ing power line conditions.

[phone] / [phone] / Fax [phone]

[e-mail] / [e-mail]

Rev. 0909

Specications

Functional Specications

Low Voltage (% of setpoint)
Trip
Reset
High Voltage
Trip (% of setpoint)
Reset (% of setpoint)
Trip Delay Time
Low Voltage
High Voltage
Restart Delay Time
After a fault or complete power loss

Input Characteristics

Supply Voltage
201-100-SP
201-200-SP
201-200-SP-T-9
Frequency

Output Characteristics

Output Contact Rating-SPDT
Pilot Duty
General Purpose

General Characteristics

Ambients Operating Temperature
Maximum Input Power
Relative Humidity
Terminal Torque
Wire Gauge
Standards Passed
Electrostatic Discharge (ESD)
Radio Frequency Immunity (RFI), Radiated
Fast Transient Burst
Surge Immunity
IEC
ANSI/IEEE
Hi-potential Test
Safety Marks
UL Listed (OT08 octal socket required)
CE
Dimensions
Weight
Enclosure
Mounting Methods

90%
93%

110% (-9 unit only)
107% (-9 unit only)

4 seconds
4 seconds (-9 unit only)

2 seconds

95-120VAC
190-240VAC
190-240VAC
50/60Hz (note: 50Hz will increase all delay timers by 20%)

480VA@240VAC
10A@240VAC

-40o to 70o C (-40o to 158o F)
5 W
10-95%, non-condensing per IEC 68-2-3
12 in.-lb.
12-22 AWG Solid or stranded

IEC 61000-4-2, Level 3, 6kV contact, 8kV air
150MHz, 10V/m
IEC 61000-4-4, Level 3, 3.5 kV input power and controls

IEC 61000-4-5, Level 3, 4kV line-to-line; Level 4, 4kV line-to-ground
C62.41 Surge and Ring Wave Compliance to a level of 6kV line-to-line
Meets UL508 (2 x rated V + 1000V for 1 minute)

UL508 (File #E68520)
IEC 60947-6-2

1.75”H x 2.375”W x 4.125”D (with socket)
9 oz.
Polycarbonate
Plugs into 8-Pin OT08 Socket; DIN rail or surface mount

Enclosure Dimensions

2.375”

(60.331)

BOTTOM

1.75”

(44.55)

4.125”

(104.65)

How to order:
Part Number: 201-100-SP

201-200-SP
201-200-SP-T-9

SIDE

WITH OT08* SOCKET

Auxiliary Products:
CT-OT08-PC (8-pin octal socket)

[phone] / [phone] / Fax [phone]

[e-mail] / [e-mail]

Rev. 0909