![](/html/11/11b1/11b1286f720f5aeb8b0211e162a137f8bb3a259d8c4ebc1e0eadc6213049ef47/bg1.png)
TermiCom XPe 15” and 19”
User Manual
Documentation Version: 26-09-2012
WEB site: www.symcod.com
E-mail: support@symcod.com
![](/html/11/11b1/11b1286f720f5aeb8b0211e162a137f8bb3a259d8c4ebc1e0eadc6213049ef47/bg2.png)
TermiCom XPe WWW.SYMCOD.COM
Warranty
Symcod warrants its products to be free
from defects in material and
workmanship during one year from the
purchase date. If a product proves to be
defective in material or workmanship
during the warranty period, Symcod will,
at its choice, repair or replace the product
with a similar product. Replacement
Product or parts may include
remanufactured or refurbished parts or
components. The replacement unit will be
covered by the balance of the time
remaining on the customer's original
limited warranty. Symcod provides no
warranty for the third-party software
included with the product or installed by
the reseller, distributor, customer or any
other party.
Warranty does not include:
Any product on which the serial number
has been defaced, modified or removed.
Damage, deterioration or malfunction
resulting from: Accident, misuse, neglect,
fire, water (except for waterproof units),
lightning, or other acts of nature,
unauthorized product modification, or
failure to follow instructions supplied
with the product. Repair or attempted
repair by anyone not authorized by
Symcod. Damage to or loss of any
programs, data or removable storage
media. Software or data loss occurring
during repair or replacement. Any
damage of the product due to installation
of the product. Causes external to the
product, such as electric power
fluctuations or failure. Use of supplies or
parts not meeting Symcod specifications.
Failure of owner to perform periodic
product maintenance as stated in
documents supplied. Any other cause
which does not relate to a product defect.
Damage caused by static. Removal,
installation, freight and set-up service
charges.
Warning
Safety & reliability, page 3
Powering, page 9
Earth ground, page 9
Fixation & handling, page 11
Cleaning, page 15
Disclaimer
The material on this document* is
intended for end user, distributor and/or
reseller use. Although downloading and
printing documents is allowed, Symcod
will not be responsible for any
modification or any other use of any
content in the displayed/downloaded
material.
Please note that all documents* are
subject to change without notice and are
occasionally revised to specify, correct or
revise the content or for other purposes.
Therefore, the version displayed on the
site may differ from your original printed
copy. Please contact us if you require
assistance. Symcod Inc. assumes no
liability for damage incurred directly or
indirectly, errors, omissions or
discrepancies between the device and the
manuals or documents supplied. Symcod
is not responsible for any loss or damage
(Including data corruption, interruption of
operation, lost business information, lost
production, etc.) caused by use, non-use
or misuse of any of the information
contained in this document*. Symcod Inc
is not responsible of the content or
validity of the links gave as references for
other products not manufactured by
Symcod Inc.
*Documents include instruction book,
user guide, operating instructions,
manuals, safety precautions /
instructions, data sheets or any other
documents supplied by Symcod.
2
![](/html/11/11b1/11b1286f720f5aeb8b0211e162a137f8bb3a259d8c4ebc1e0eadc6213049ef47/bg3.png)
TermiCom XPe WWW.SYMCOD.COM
IMPORTANT
Read me first
By carrying out the installation and the use of this equipment you accept the rules and limitations
described in this document or any other document relating to this product.
By carrying out the installation and the use of this equipment you are presumed having read all
the safety warnings ( ).
WARNING: Safety and reliability
SYMCOD Inc will not be responsible for the use of this equipment for other purpose then data
collection. This equipment is designed and intended for an industrial and commercial use only. The
TermiCom XPe is not for a residential use.
3
![](/html/11/11b1/11b1286f720f5aeb8b0211e162a137f8bb3a259d8c4ebc1e0eadc6213049ef47/bg4.png)
TermiCom XPe WWW.SYMCOD.COM
Content
TermiCom XPe ............................................................................................... 5
Main characteristics ........................................................................................ 6
Environmental specifications .......................................................................... 6
Power .............................................................................................................. 9
Options description ......................................................................................... 9
Using modes.................................................................................................. 10
Desktop or wall mount, side view ............................................................. 10
Desktop, back view ................................................................................... 10
How to install your TermiCom XPE ............................................................ 11
Detailed Specifications ................................................................................. 14
Power connector ..................................................................................... 14
TermiCom XPE configuration ...................................................................... 15
Recommendations ......................................................................................... 17
TermiCom XPE maintenance ....................................................................... 17
Certification .................................................................................................. 17
Troubleshooting ............................................................................................ 17
Accessories & options .................................................................................. 18
Dictionnary ................................................................................................... 19
Service and support ....................................................................................... 19
Support ................................................................................................... 19
Return Merchandise Authorisation (RMA) ........................................... 19
4
![](/html/11/11b1/11b1286f720f5aeb8b0211e162a137f8bb3a259d8c4ebc1e0eadc6213049ef47/bg5.png)
TermiCom XPe WWW.SYMCOD.COM
TermiCom XPE is microcomputer specifically designed for dusty industrial environment without
watering. The casing of the XPe is made of aluminum witch give it is lightness and resistance. Basic
TermiCom XPe is provided with a Atom 1,6 GHZ, a 15" tactile color screen (LCD TFT resistive) and with
a solid aluminum stand which allows desktop or wall mount installation in a few minutes. Several inputs
and outputs make possible the addition of peripherals such as industrial keyboard, bar code scanner or any
other peripherals. The "flash" disk included with the basic version can be completely protected. This
feature is used to prevent any modification made by the user that could put in danger the application or the
operating system. The basic operating system included in TermiCom XPE is Windows XP Embedded; it is
directly installed on the flash disk. For users who wish to have a complete version of Windows XP Pro, a
version of TermiCom XPe including this operating system is available. In that case, the operating system
will be installed on a hard disk.
The Ultra-Resistant touch screen option is offered when the TermiCom will be used in environment in
which there is particularly abrasive dust. Contrary to the standard touch screens that are covered with a
polymer, this one is covered with a thin layer of tempered glass, which makes it much more resistant to the
abrasives and even allows it to function with deep scratches. You can also use the wireless version of
TermiCom XPe by including the WiFi 802.11b/g option.
5
![](/html/11/11b1/11b1286f720f5aeb8b0211e162a137f8bb3a259d8c4ebc1e0eadc6213049ef47/bg6.png)
TermiCom XPe WWW.SYMCOD.COM
Power requirement without peripheral (max.)
2 gig Flash 2 gig Hard disk 80 GIG
Environmental specifications
Operating temperature C°
1
Humidity (without
Condensation) %
TermiCom XPe 15”
O = Available Option
1
Recommended for environments with very abrasive dust, screen covered with a fine layer of tempered glass, allows
operation with deep scratches.
1
Maximum temperature, IMPORTANT:
* Do not cover while the unit is ON.
* The back of the TermiCom should not be placed flat on a table while the unit is ON.
* Keep the surfaces of the TermiCom free of any material and respect a minimum area of 2” between
the back of TermiCom and of any surface in order to allow the dissipation of the internal heat.
6