© 2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All rights reserved.
Release Notes RS507X PAAACS00-006-N01D0
Contents
Introduction
Description
Contents
Device Compatibility
Installation Requirements
Installation Instructions
Downloadable Software included in this Release
Part Number and Release Date
Introduction
This release is intended to provide SPR#39946 and SPR#40182 fixes available for all the customers
via CFE. This firmware is built on top of R04 firmware. This firmware version provides solution to
proximity alone mode of RS507 issue with Android host devices.
This firmware is compatible with both RS507X and legacy RS507 models.
Description
This release includes the following changes from the previous release S00-006-R04.
Fixes
• SPR#39946 Proximity issue fix
• SPR#40182 Intermittent beam stuck issue on RS507
© 2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All rights reserved.
Contents
Filename
Description
PAAACS00-006-N01D0.DAT
RS507X/RS507 firmware file
Device Compatibility
This firmware is compatible with following devices:
Device
Comments
RS507X
All SKUs
RS507
All SKUs
Installation Requirements
This firmware may be installed on any compatible RS507X and RS507 devices.
Installation Instructions
Using a WT41N0 device:
1. Use the firmware update utility \Windows\FirmwareUpdate\FirmwareUpdate.exe 2.
Download the PAAACS00-006-N01D0.DAT firmware to the WT41N0 device. (e.g.
\application\PAAACS00-006-N01D0.DAT)
3. Connect the RS507X/RS507 scanner to the WT41N0 device via the cable or Bluetooth.
4. Launch the FirmwareUpdate utility.
5. Select the Yes or No to ‘Is your scanner in Bluetooth mode?’ dialog, depending on your
connection method.
6. Click ‘Firmware…’ button and select the new firmware file (.DAT file).
7. Click ‘Flash Scanner’ button.
Loading...