Symbol Technologies RD11440 User Manual

Quick Reference Guide

RFID Reader

XR400 / XR480

Revision A — XXX 2006
72-XXXXX-01

http://www.symbol.com/warranty

For the complete Symbol hardware product warranty statement, go to:

Warranty

http://www.symbol.com/manuals

For the latest version of this guide and other supporting documentation, go to:

[phone]
Contact local distributor or call

[phone] Outside US
1-800-347-0178 Inside US

Inside Spain 91 324 40 00

Canada 905-629-7226

1-631-738-2400

Distributor Operations
Europe/Mid-East

Sales Support
Latin America

Sweden/Sverige 08 445 29 00 Outside Spain [phone]

South Africa 11-809 5311 Spain/España
Netherlands/Nederland 315-271700 Norway/Norge [phone]
Italy/Italia 2-484441 Mexico/México 5-520-1835
France 01-40-96-52-21 Germany/Deutschland 6074-49020
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
Australia 1-800-672-906 Austria/Österreich 01-5055794-0
United Kingdom 0800 328 2424 Asia/Pacific [phone]

United States 1-800-653-5350

representative. If there is a problem with the equipment, they will contact the Symbol Support Center:
applications. If a problem occurs using the equipment, contact the facility Technical or Systems Support
Before using the unit, it must be configured to operate in the facility network and run the required

Service Information

http://www.symbol.com/patents

This product is covered by one or more of the patents listed on the web site:

Patents

http://devzone.symbol.com

Devzone web site:
Software updates, SDKs, development support and related documents are available from the Symbol

http://www.symbol.com/manuals

Supporting documents are available for viewing/download from the Symbol documentation web site:

Reference Documents

http://www.symbol.com

Holtsville, N.Y. 11742-1300
One Symbol Plaza
Symbol Technologies, Inc.
are hereby acknowledged.
mentioned in this manual may be trademarks or registered trademarks of their respective companies and
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names
and subsystems contained in Symbol products.
process in which Symbol products might be used. An implied license exists only for equipment, circuits,
patent, covering or relating to any combination, system, apparatus, machine, material, method, or
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or
of any product, circuit, or application described herein.
Symbol does not assume any product liability arising out of, or in connection with, the application or use
Symbol reserves the right to make changes to any product to improve reliability, function, or design.
© 2006 SYMBOL TECHNOLOGIES, INC. All rights reserved.

Introduction

This QRG (Quick Reference Guide) provides information for the XR Series RFID Readers. The QRG includes
LED definitions, port descriptions, and mounting information. For details, refer to the XR Series RFID
Reader Integrator Guide P/N 72E-71773-XX, available at: http://www.symbol.com/manuals

Product Description

The Symbol XR Series RFID Readers are intelligent, multi-protocol UHF RFID readers with RFID read
performance that provides real-time, seamless EPC-compliant tags processing.

Features:

• UHF Generation 2 support (EPC Class 0 and Class 1 supported only in XR400)

• Intel XScale

• Support for custom or third-party applications

• Feature set for event and tag management.

®

processor with Windows® CE

Firmware Updates

The XR SeriesXR Series RFID Readers are shipped with the current firmware version. To install the latest
upgrade refer to the XR Series Integrator Guide P/N 72E-71773-XX, available from:

http://www.symbol.com/manuals

Note: Ensure that power is not interrupted during a firmware upgrade.

LED Definitions

LEDs indicate reader status as described in the following table.

LED Indication

Green Reader is powered on.
Red Error condition or non-operational mode, e.g., boot-up.
Yellow Successful tag read.

Physical Connections Ports

LEDs

Antenna (Reverse TNC) XR400/XR480 - Supports up to eight antennas (four transmit, four receive).

10/100BaseT Ethernet Insert a standard RJ45 Ethernet cable for connection to an Ethernet network.

Mounting

Tabs

10/100BaseT Ethernet

Antenna (Reverse TNC) USB Host RS232

USB Client

GPIO

Mounting
Tabs

Reset Button

Power

USB Client For future expansion.
USB Host Support for USB Flash drives, USB screen.
RS232 For serial console only.
GPIO Insert a DB15 serial cable for connection to an external device.
Power Connect the Symbol approved power supply (see Power Supply for the Symbol

Mounting

For installation instructions refer to the XR Series Integrator Guide P/N 72E-71773-XX, available from:

http://www.symbol.com/manuals.

1. Position the XR reader on the wall or shelf, ensuring a minimum clearance of five inches on all

2. Mark the hole locations using the mounting tabs as a guide. Remove the XR400 and drill four

3. Reposition the XR reader over the mounting holes and secure using fasteners appropriate for the

Port Description

XR480 - Supports up to eight transceiver antennas.

Insert a cross-connect Ethernet cable for connection to a local PC.

approved power supply). The power supply uses an AC adapter that varies
depending on the country. Maximum power consumption: 24 VDC, 1.2 A.

sides. Orient the XR reader vertically with the ports at the bottom and ensure that all connected
cables hang straight down.

mounting holes at the marked locations.

surface material.

Regulatory Information

All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will
be labeled as required. Regulatory information is available from: http://www.symbol.com/manuals
Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol
Technologies, could void the authority to operate the equipment.
Antennas: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications,
or attachments could cause damage and may violate regulations.

Country Approvals

Regulatory markings are applied to the device signifying the radio(s) are approved for use in the following
countries: United States.

Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is
available at: http://www2.symbol.com/doc.

Operation of the device without regulatory approval is illegal.

Health and Safety Recommendations

Warnings for Use of Wireless Devices

Please observe all warning notices with regard to the usage of wireless devices.

Potentially Hazardous Atmospheres-Fixed Installations

You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants

etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders).

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

It is advisable to use the device only in the normal operating position.

Remote and Standalone Antenna Configurations

To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or
operating near users at stand-alone desktop of similar configurations must operate with a minimum separation

distance of 79 cm from all persons.

Power Supply

Use only a Symbol approved power supply, output rated 24 Vdc and minimum 3 Amps. The power supply is
certified to UL60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval given to
this device and may be dangerous.

Radio Frequency Interference Requirements - FCC

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.