
Revision A — April 2005
72-68756-02
For the latest version of this guide go to: http://www.symbol.com/manuals.
Licensing, Patent and Regulatory Information
Mobile 2003 Software for Pocket PCs
®
With Windows
MC906R-G RFID
© 2004-2005 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability, function, or design.
Symbol does not assume any product liability arising out of, or in connection with, the application or use
of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right
or patent, covering or relating to any combination, system, apparatus, machine, material, method, or
process in which Symbol products might be used. An implied license exists only for equipment, circuits,
and subsystems contained in Symbol products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product
names mentioned in this manual may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Patents
This product is covered by one or more of the patents listed on the Web site: www.symbol.com/patents.
Warranty
For the complete Symbol hardware product warranty statement, go to:
http://www.symbol.com/warranty.
+44 118 945 7360
Contact local distributor or call
+1-954-255-2610 Outside US
1-800-347-0178 Inside US
Inside Spain 91 324 40 00
Canada 905-629-7226
1-631-738-2400
END-USER SOFTWARE LICENSE AGREEMENT
You have acquired a device (“DEVICE”) that includes software licensed by SYMBOL TECHNOLOGIES, INC. from Microsoft
Licensing Inc. or its affiliates (“MS”). Those installed software products of MS origin, as well as associated media, printed
materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws
and treaties. The SOFTWARE is licensed, not sold. All rights reserved. SOFTWARE includes software already installed on
the DEVICE (“DEVICE Software”) and MS software contained on the CD-ROM disk (“Companion CD”).
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR COPY THE
SOFTWARE. INSTEAD, PROMPTLY CONTACT SYMBOL TECHNOLOGIES, INC. FOR INSTRUCTIONS ON RETURN OF THE
UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE
DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS
CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:
•DEVICE Software. You may use the DEVICE Software as installed on the DEVICE.
•COMPANION CD. A Companion CD is included with your DEVICE, and you may install and use the Microsoft
ActiveSync® 3.7 component on one (1) or more computers to exchange information with one (1) or more computing
devices that contain a compatible version of the Microsoft® Pocket PC Software 2003 operating system. For other
software component(s) contained on the Companion CD, you may install and use such components only in accordance
with the terms of the printed or online end user license agreement(s) provided with such component(s). In the absence
of an end user license agreement for particular component(s) of the Companion CD, you may install and use only one (1)
copy of such component(s) on the DEVICE or a single computer with which you use the DEVICE.
•Microsoft@ Outlook® 2002. If Microsoft Outlook 2002 is included with your DEVICE, the following terms apply to
your use of Microsoft Outlook 2002: (i) regardless of the information contained in the “Software Installation and Use”
section of the online EULA you may install one (1) copy of Microsoft Outlook 2002 on one (1) computer to use, exchange
data, share data, access and interact with the DEVICE, and (ii) the EULA for Microsoft Outlook 2002 is between
SYMBOL TECHNOLOGIES, INC. and the end user - not between the PC manufacturer and end user.
•Security Updates/Digital Rights Management. Content providers are using the digital rights management
technology contained in this SOFTWARE (“DRM”) to protect the integrity of their content (“Secure Content”) so that
their intellectual property, including copyright, in such content is not misappropriated. Portions of this SOFTWARE and
third party applications such as media players use DRM to play Secure Content (“DRM Software”). If the DRM
SOFTWARE's security has been compromised, owners of Secure Content (“Secure Content Owners”) may request that
MS revoke the DRM Software's right to copy, display and/or play Secure Content. Revocation does not alter the DRM
Software's ability to play unprotected content. A list of revoked DRM Software is sent to your computer whenever you
download a license for Secure Content from the Internet. You therefore agree that MS may, in conjunction with such
license, also download revocation lists onto your computer on behalf of Secure Content Owners. MS will not retrieve
Distributor Operations
Europe/Mid-East
Sales Support
Latin America
Sweden/Sverige 08 445 29 00 Outside Spain +34 91 324 40 00
South Africa 11-809 5311 Spain/España
Netherlands/Nederland 315-271700 Norway/Norge +47 2232 4375
Italy/Italia 2-484441 Mexico/México 5-520-1835
France 01-40-96-52-21 Germany/Deutschland 6074-49020
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
Australia 1-800-672-906 Austria/Österreich 01-5055794-0
United Kingdom 0800 328 2424 Asia/Pacific +65-6796-9600
United States 1-800-653-5350
there is a problem with the equipment, they will contact the Symbol Support Center:
If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support. If
Before you use the unit, it must be configured to operate in your facility’s network and run your applications.
Service Information
any personally identifiable information, or any other information, from your computer by downloading such revocation
lists. Secure Content Owners may also require you to upgrade some of the DRM components in this SOFTWARE (“DRM
Upgrades”) before accessing their content. When you attempt to play such content, MS DRM Software will notify you
that a DRM Upgrade is required and then ask for your consent before the DRM Upgrade is downloaded. Third party
DRM Software may do the same. If you decline the upgrade, you will not be able to access content that requires the
DRM Upgrade; however, you will still be able to access unprotected content and Secure Content that does not require
the upgrade.
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
•Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s),
you should understand that speech and handwriting recognition are inherently statistical processes and that errors can
occur in the component's recognition of your handwriting, and the final conversion into text. Neither SYMBOL
TECHNOLOGIES, INC. nor its suppliers shall be liable for any damages arising out of errors in the speech and
handwriting recognition process.
•Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer,
decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation.
•Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE
Software installed in read only memory (“ROM”) of the DEVICE may only be used as part of the DEVICE.
•Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations
and/or multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple
versions of the EULA, you are licensed to use only one (1) copy of the DEVICE Software.
•NOTICE REGARDING THE MPEG-4 VISUAL STANDARD. The SOFTWARE may include MPEG-4 visual decoding
technology. MPEG LA. L.L.C. requires the following notice:
•USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT
CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE
ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA. L.L.C.
If you have questions regarding this Notice, please contact MPEG LA. L.L.C., 250 Steele Street, Suite 300, Denver, Colorado
80206: Telephone 303 331.1880; FAX 303 331.1879
•NO RENTAL. Except if specifically authorized by SYMBOL TECHNOLOGIES, INC. for leased hardware, you may not rent,
lease, or lend the SOFTWARE.
LEASED HARDWARE. In the event that you receive the DEVICE under the terms of a lease from SYMBOL TECHNOLOGIES,
INC.or SYMBOL TECHNOLOGIES, INC.'s third-party representative, the following additional terms shall apply: (i) you may
not transfer the SOFTWARE to another user as part of the transfer of the DEVICE, whether or not a permanent transfer of
or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.
Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway
EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with
Ta iw an
C and +40° C).
To charge the battery for the mobile device, battery and charger temperatures must be between +32° F and +104° F (0°
Battery Charging Note
http:/mysymbolcare.symbol.com/battery/batbasics1.html.
included as part of the mobile computer or bar code scanner. For more information on Symbol batteries, please visit:
Standard warranty period for all Symbol batteries is 30 days, regardless if the battery was purchased separately or
Replace the battery when a significant loss of run time is detected.
battery.
once a year. If an electrolyte leakage is observed, avoid any contact with affected area and properly dispose of the
and electrolyte leakage. When storing batteries for one year or longer, they should be charged and discharged at least
batteries discharged in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts
When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store
affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.
However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors
Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry.
Battery Information

the SOFTWARE with the DEVICE is otherwise allowed in this EULA; (ii) your rights with respect to any SOFTWARE upgrades
shall be as determined by the lease you signed for the DEVICE; and (iii) you may not use the SOFTWARE after your lease
terminates, unless you purchase the DEVICE from SYMBOL TECHNOLOGIES, INC.
•Software Transfer. You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of
the DEVICE, provided you retain no copies, you transfer all of the SOFTWARE (including all component parts, the media
and printed materials, any upgrades, this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient
agrees to the terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the
SOFTWARE.
•Termination. Without prejudice to any other rights, SYMBOL TECHNOLOGIES, INC. or MS may terminate this EULA if
you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the
SOFTWARE and all of its component parts.
UPGRADES AND RECOVERY MEDIA.
•DEVICE Software. If the DEVICE Software is provided by SYMBOL TECHNOLOGIES, INC. separate from the DEVICE on
media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled “For Upgrade Purposes
Only” you may install one (1) copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing
DEVICE Software, and use it in accordance with this EULA, including any additional EULA terms accompanying the
upgrade DEVICE software.
•COMPANION CD. If any software component(s) is provided by SYMBOL TECHNOLOGIES, INC. separate from the
DEVICE on CD ROM disk(s) or via web download or other means, and labeled “For Upgrade Purposes Only”, you may (i)
install and use one (1) copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a
replacement copy for the existing Companion CD component(s).
COPYRIGHT. All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images,
photographs, animations, video, audio, music, text and “applets,” incorporated into the SOFTWARE), the accompanying
printed materials, and any copies of the SOFTWARE, are owned by MS or its suppliers (including Microsoft Corporation).
You may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the
content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be
protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this EULA are reserved by MS and its suppliers (including Microsoft
Corporation).
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply
with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration
Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For additional
information, see http://www.microsoft.com/exporting/.
Regulatory Information
All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled
as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol
Technologies, could void the user's authority to operate the equipment. Antenna's, use only the supplied or an approved
replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate
regulations.
Radio Modules
This device contains an approved radio module. This module is identified below:
• Symbol RLAN (11Mbps DSSS) radio module, Type: 21-64436.
Power Supply
Use only a Symbol-approved power supply output rated 11-16 Vdc and minimum 2A. The power supply is certified to
EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may
be dangerous.
Benutzen Sie nur eine Symbol Technologies genehmigt in den Ausgabe: 11-16Vdc und minimum 2A. Die
Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben.
FCC RF Exposure Guidelines
Reducing RF Influence - Use Properly
It is advisable to use the device only in the normal operating position and it is recommended that no part of the human
body be allowed to come too close to the antenna during operation of the equipment.
Handheld Devices
To comply with FCC RF exposure requirements, this device must be operated in the hand and must operate with a
minimum separation distance of 20 cm or more from a person's body. Other operating configurations should be avoided.
Laser Labels
In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:
ENGLISH HEBREW
CLASS 1 CLASS 1 LASER PRODUCT
CLASS 2 LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
DANISH / DANSK ITALIAN / ITALIANO
KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE 1 PRODOTTO AL LASER DI CLASSE 1
KLASSE 2 LASERLYF CLASSE 2 LUCE LASER
SE IKKE IND I STRÅLEN NON FISSARE IL RAGG IOPRODOTTO
KLASSE 2 LASERPRODUKT AL LASER DI CLASSE 2
DUTCH / NEDERLANDS NORW EGIAN / NORSK
KLASSE 1 KLASSE-1 LASERPRODUKT KLASSE 1 LASERPRODUKT, KLASSE 1
KLASSE 2 LASERLICHT KLASSE 2 LASERLYS IKKE STIRR INN I LYSSTRÅLEN
NIET IN STRAAL STAREN LASERPRODUKT, KLASSE 2
KLASSE-2 LASERPRODUKT
FINNISH / SUOMI PORTUGUESE / PORTUGUÊS
LUOKKA 1 LUOKKA 1 LASERTUOTE CLASSE 1 PRODUTO LAS ER DA CLASSE 1
LUOKKA 2 LASERVALO CLASSE 2 LUZ DE LASE R NÃO FIXAR O RAIO LUMINO SO
ÄLÄ TUIJOTA SÄ DETTÄ PRODUTO LAS ER DA CLASSE 2
LUOKKA 2 LASERTUOTE
FRENCH / FRANÇAIS SPANISH / ESPAÑOL
CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASE 1 PRODUCTO LASER DE LA CLASE 1
CLASSE 2 LUMIERE LASER CLASE 2 LUZ LASER
NE PAS REGARDER LE RAYON FIXEMENT NO MIRE FIJAMENTE EL HAZ
PRODUIT LASER DE CLASSE 2 PRODUCTO LASER DE LA CLASE 2
GERMAN / DEUTCH SWEDISH / SVENSKA
KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASS 1 LASERPRODUKT KLASS 1
KLASSE 2 LASERSTRAHLEN KLASS 2 LASERLJUS STIRRA INTE MOT STRÅLEN
NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT KLASS 2
LASERPROD UKT DER KLA SSE 2
PRODUCT SUPPORT. Product support for the SOFTWARE is not provided by MS, its parent corporation Microsoft
Corporation, or their affiliates or subsidiaries. For product support, please refer to SYMBOL TECHNOLOGIES, INC.support
number provided in the documentation for the DEVICE. Should you have any questions concerning this EULA, or if you desire
to contact SYMBOL TECHNOLOGIES, INC. for any other reason, please refer to the address provided in the documentation
for the DEVICE.
NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY
INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL
PURPOSE.
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION,
PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE
PRINTED MATERIALS.
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below.
Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety
programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural/neutral position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Laser Devices
Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-1:1994+A11:1996. The laser
classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following
statement is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous laser light exposure.
•Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as
the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser
is not known to be harmful.
Scanner Labeling
LASERLICHT - NICHT IN DEN STRAHL BLICKEN.
LE FAISCEAU APPAREIL LASER DE CLASSE 2.
CAUTION-LASER LIGHT. DO NOT STARE INTO BEAM.
LASER KLASSE 2
LUMI¨RE LASER -NE PAS REGARDER DANS
CLASS 2 LASER PRODUCT 630-680 nM, 1 mW
JAPANESE / ᣣᧄ⺆
ࠢࠬޓࠢࠬࠩຠ
ࠢࠬޓࠩశ✢
శ✢ࠍ⋥ⷞߒߥߢߊߛߐ
ࠢࠬࠩຠ
KOREAN /G䞲ῃ㠊
X❇ G X❇ G⩞㧊㩖G㩲䛞
Y❇ G ⩞㧊㩖Gὧ㍶
G 㧊Gὧ㍶㦚G㭒㔲䞮㰖GⰞ㕃㔲㡺U
G Y❇ G⩞㧊㩖Gὧ㍶
CHINESE / ㅔԧЁ᭛
1㉏ 1㉏▔ܝѻક
2㉏ ▔ܝ
ߛ࣓⊼㾚ܝᴳ
2㉏▔ܝѻક
Radio Frequency Interference Requirements
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
the instructions, may cause harmful interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio Transmitters
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications
were met.
uses and can radiate radio frequency energy and, if not installed and used in accordance with