X
2.4G 4 CH REMOTE CONTROL QUADCOPTER
2
EVERSION
1
INSTRUCTION MANUAL
IMPLEMENT STANDARD: GB/T26701-2011
Main characteristics
Four-axis structure is applied,which makes the quadcopter more flexible
and rapid when flying.It has the characteristics of wind-resistant and can
be flied indoor or outdoor.
Built-in gyroscope stabilizer can ensure accurte positing in the air.
Modular design structure is applied, more simple for assembly and
convenient for maintenance.
360 degree 3D stunt & tumbling function.
All material, dimensions and spare parts included in this instruction are for reference
only. The company is not responsible for any changes printed parts and notify
consumer. Any updated or changed please refer to our website www.symatoys.com.
PREFACE
IMPORTANT INSTRUCTION
SAFETY & CAUTIONS
-1-
ABOUT CONTENTS
Ｐｒｏｄｕｃｔ ｉｎｃｌｕｄｅｄ
ｆｏｌｌｏｗｉｎｇ ｃｏｎｔｅｎｔｓ：
Ｑｕａｄｃｏｐｔｅｒ
２．４Ｇ Ｒｅｍｏｔｅ ｃｏｎｔｒｏｌｌｅｒ
ＵＳＢ ｃｈａｒｇｉｎｇ ｗｉｒｅ
Ｉｎｓｔｒｕｃｔｉｏｎ ｍａｎｕａｌ
Ｓｃｒｅｗｄｒｉｖｅｒ
Ｂｌａｄｅ（４ ｐｉｅｃｅｓ）
GET TO KNOW YOUR TRANSMITTER
Ｈｉｇｈ／Ｌｏｗ
Ｌｅｆｔ ｃｏｎｔｒｏｌ
ｌｅｖｅｒ
Ｔｒｉｍｍｉｎｇ
＆ ｒｅｓｅｔｔｉｎｇ
Ｌｅｆｔ Ｆｉｎｅ－ｔｕｎｉｎｇ
ｓｐｅｅｄ ｓｗｉｔｃｈ
ＯＮ／ＯＦＦ
ｐｏｗｅｒ ａｎｄ ｉｎｄｉｃａｔｏｒ
３Ｄ Ｅｖｅｒｓｉｏｎ
Ｒｉｇｈｔ ｃｏｎｔｒｏｌ
ｌｅｖｅｒ
Ｍｏｄｅ
ｓｗｉｔｃｈ
Ｒｉｇｈｔ Ｆｉｎｅ－ｔｕｎｉｎｇ
READY TO FLY YOUR QUADCOPTER
-2-
Ｂａｔｔｅｒｙ ｃｏｖｅｒ
４ｘ１．５Ｖ ｂａｔｔｅｒｉｅｓ
CAUTIONS
１．Ｗｈｅｎ ｔｈｅ ｉｎｄｉｃａｔｏｒ ｏｆ ｔｈｅ ｔｒａｎｓｍｉｔｔｅｒ ａｐｐｅａｒｓ ｅｔｅｒｎａｌ ｂｒｉｇｈｔ，ｈｏｗｅｖｅｒ，ｔｈｅ ｉｎｄｉｃａｔｏｒ
ｏｆ ｔｈｅ ｑｕａｄｃｏｐｔｅｒ ａｐｐｅｒｓ ｓｌｏｗ ｆｌａｓｈｉｎｇ， ｔｈｉｓ ｍｅａｎｓ ｔｈａｔ ｄｅｃｏｄｉｎｇ ｉｓ ｎｏｔ ｓｕｃｃｅｓｓｆｕｌ．
Ｔｈｉｓ ｔｉｍｅ ｐｌｅａｓｅ ｄｉｓｃｏｎｎｅｃｔ ｔｈｅ ｐｏｗｅｒ ｂｏｔｈ ｏｆ ｔｈｅ ｑｕａｄ ｃｏｐｔｅｒ ａｎｄ ｔｒａｎｓｍｉｔｔｅｒ，ｔｈｅｎ
ｒｅｐｅａｔ ｔｈｅ ｐｒｅ－ｆｌｙｉｎｇ ｓｔｅｐｓ．
２．Ｉｆ ｔｈｅ ｑｕａｄｃｏｐｔｅｒ ｉｓ ｔｉｌｔｉｎｇ ｔｏ ｏｎｅ ｓｉｄｅ ａｂｒｕｐｔｌｙ ｏｒ ｓｐｉｎｉｎｇ ｗｈｉｌｅ ｈｏｖｅｉｎｇ， ｐｌｅａｓｅ ｓｗｉｔｃｈ
ｏｆｆ ｔｈｅ ｐｏｗｅｒ ｂｏｔｈ ｏｆ ｔｈｅ ｑｕａｄｃｏｐｔｅｒ ａｎｄ ｔｒａｎｓｍｉｔｔｅｒ ａｎｄ ｔｈｅｎ ｒｅｐｅａｔ ｔｈｅ ｐｒｅ－ｆｌｙｉｎｇ
ｓｔｅｐｓ．
３．Ｗｈｅｎ ｔｈｅ ｉｎｄｉｃａｔｏｒ ｏｆ ｔｈｅ ｑｕａｄｃｏｐｔｅｒ ｋｅｅｐｓ ｆｌａｓｈｉｎｇ ｓｌｏｗｌｙ， ｉｔ ｍｅａｎｓ ｔｈａｔ ｔｈｅ ｑｕａｄ
ｃｏｐｔｅｒ ｈａｓ ｅｎｔｅｒｅｄ ｉｎｔｏ ｔｈｅ ｌｏｗ ｖｏｌｔａｇｅ ｐｒｏｔｅｃｔｉｏｎ ｓｔａｔｅ．Ｔｈｉｓ ｔｉｍｅ ｙｏｕ ｎｅｅｄ ｔｏ ｃｈａｒｇｅ
ｔｈｅ ｑｕａｄｃｏｐｔｅｒ．
MODE SWITCH & TRIMMING RESET FUNCTION
A B
Ｍｏｄｅ ｓｗｉｔｈ ｆｕｎｃｔｉｏｎ：
Ｋｅｅｐ ｐｒｅｓｓｉｎｇ ｔｈｅ ｂｕｔｔｏｎ Ａ， ｔｈｅｎ ｓｗｉｔｃｈ ｏｎ
ｔｈｅ ｐｏｗｅｒ ｏｆ ｔｈｅ ｔｒａｎｓｍｉｔｔｅｒ， ｙｏｕｒ ｃａｎ ｓｅｌｅｃｔ
Ｍｏｄｅ １ ｏｒ Ｍｏｄｅ ２．
Ｌｅｖｅｌ ｃａｌｉｂｒａｔｉｏｎ ｆｕｎｃｔｉｏｎ：
Ｉｆ ｑｕａｄｃｏｐｔｅｒ ａｌｗａｙｓ ｆｌｙ ｔｏ ａ ｓｉｄｅ ｗｈｅｎ ｓｔａｒｔｉｎｇ， ｐｌｅａｓｅ
ｒｅ－ｍａｔｃｈ ｓｉｇｎａｌ ａｎｄ ｐｌａｃｅ ｉｔ ｏｎ ａ ｈｏｒｉｚｏｎｔａｌ ｐｌａｎｅ． Ｔｈａｎ
ｔｕｒｎ ｔｈｅ ｔｗｏ ｌｅｖｅｒｓ ｔｏ ｔｈｅ ｌｏｗｅｒ ｒｉｇｈｔ ｃｏｍｅｒ（ａｓ ｌｅｆｔ ｉｍａｇｅ）
ｆｏｒ ｓｅｃｏｎｄｓ， ｗｈｅｎ ｉｎｄｉｃａｔｏｒ ｋｅｅｐ ｌｉｇｈｔ ｕｐ， ｉｔ ｆｉｎｓｈｅｓ ａｕｔｏ
ｌｅｖｅｌ ｃａｌｉｂｒａｔｉｏｎ．
Ｒｅｓｅｔｔｉｎｇ ｆｕｎｃｔｉｏｎ：
Ｋｅｅｐ ｐｒｅｓｓｉｎｇ ｔｈｅ ｂｕｔｔｏｎ Ｂ， ｔｈｅｎ ｓｗｉｔｃｈ ｏｎ
ｔｈｅ ｐｏｗｅｒ ｏｆ ｔｈｅｔｒａｎｓｍｉｔｔｅｒ． Ｅｎｔｅｒ ｉｎｔｏ ｔｈｅ
Ｔｒｉｍｍｉｎｇ ＆Ｒｅｓｅｔｔｉｎｇ Ｍｏｄｅ（Ｉｔ ｉｓ ｈｉｇｈｌｙ
ｓｕｇｇｅｓｔｅｄ ｔｈａｔ ｔｈｅ ｆｒｅｓｈｍａｎ ｓｈｏｕｌｄ ｒｅｓｅｔ
ｔｈｅ ｔｒｕｍｍｅｒ ｆｉｒｓｔ ｂｅｆｏｒｅ ｓｔａｒｔｉｎｇ ｔｈｅ ｆｉｒｓｔ ｆｌｉｇｈｔ．）
-3-
ILLUSTRATION ON CONTROLL THE QUADCOPTER
(MODE 1, DEFAULTED MODE WHEN STARTING)
MODE 1
-4-
ILLUSTRATION ON HOW TO CONTROL THE
QUADCOPTER (MODE 2)
MODE 2
-5-
FLIGHT CONTROL
3D EVERSION AND THROWING FLIGHT
INSTRUCTIONS
１．Ｗｈｅｎ ｙｏｕ ａｒｅ ｆａｍｉｌｉａｒ ｗｉｔｈ ｔｈｅ ｂａｓｉｃ
ｏｐｅｒａｔｉｏｎ， ｙｏｕ ｃａｎ ｐｌａｙ ｓｏｍｅ
ａｗｅｓｏｍｅ ＆ ｔｈｒｉｌｌｉｎｇ ｓｔｕｎｔ ｏｐｅｒａｔｉｏｎ．
Ｆｉｒｓｔ ｏｆ ａｌｌ， ｆｌｙ ｔｈｅ ｆｏｕｒ－ａｘｉａｌ ａｉｒｃｒａｆｔ ｔｏ
ｔｈｅ ｈｅｉｇｈｔ ｏｆ ａｂｏｕｔ ｏｒ ｍｏｒｅ ｔｈａｎ ３
ｍｅｔｅｒｓ， ｐｒｅｓｓ ｔｈｅ ３Ｄ Ｅｖｅｒｓｉｏｎ ｓｗｉｔｃｈ
ｏｎ ｔｈｅ ｒｉｇｈｔ ａｂｏｖｅ ｏｆ ｔｈｅ ｔｒａｎｓｍｉｔｔｅｒ，
ｔｈｅｎ ｒｉｇｈｔ ａｂｏｖｅ ｏｆ ｔｈｅ ｔｒａｎｓｍｉｔｔｅｒ，
ａｎｄ ｐｕｓｈ ｔｈｅ ｒｉｇｈｔ ｒｕｄｄｅｒ （ｉｎ ａｎｙ
ｄｉｒｅｃｔｉｏｎ） ａｔ ｔｈｅ ｓａｍｅ ｔｏｎｅ ｔｈｅｎ ｙｏｕ ｃａｎ
ｍａｋｅ ３６０ ｄｅｇｒｅｅ ３Ｄ ｔｕｍｂｌｉｎｇ ｏｐｅｒａｔｉｏｎ
ｉｎ ａｎｙ ｄｉｒｅｃｔｉｏｎ ａｎｄ ｍａｋｅ ｓｕｃｃｅｓｓｉｖｅ
ｔｕｍｂｌｉｎｇ ｓｔｕｎｔ ｐｅｒｆｏｒｍａｎｃｅ ａｓ ｗｅｌｌ．
３ ｍｅｔｅｒｓ
-6-
BATTERY CHARGING
Ｃａｕｔｉｏｎ：
１．Ｐｌｅａｓｅ ｐｕｌｌ ｏｕｔ ｔｈｅ ｃｈａｒｇｉｎｇ ｗｉｒｅ ｂｅｆｏｒｅ
ｓｈｕｔｔｉｎｇ ｄｏｗｎ ｔｈｅ ｃｏｍｐｕｔｅｒ ｗｈｅｎ ｃｈａｒｇｉｎｇ
ｂｙ ｔｈｅ ｃｏｍｐｕｔｅｒ ．
２．Ｐｌｅａｓｅ ｍａｋｅ ｓｕｒｅ ｔｈｅ ｐｏｌａｒｉｔｙ ｃｏｎｎｅｃｔｉｎｇ
ｉｓ ｃｏｒｒｅｃｔｌｙ ｗｈｅｎ ｃｏｎｎｅｃｔｉｎｇ ｔｈｅ ＵＳＢ ｗｉｒｅ
ｔｏ ｔｈｅ ｂａｔｔｅｒｙ ，ａｎｄ ｍａｋｅ ｓｕｒｅ ｔｈｅ ｐｏｌａｒｉｔｙ
ｃａｎ ｎｏｔ ｂｅ ｕｐｓｉｄｅ ｏｒ ｄｏｗｎ．
Ｃｈａｒｇｉｎｇ ｔｉｍｅ： ａｂｏｕｔ ３０ ｍｉｎｕｔｅｓ ； Ｆｌｙｉｎｇ ｔｉｍｅ： ａｂｏｕｔ ５ ｍｉｎｕｔｅｓ．
-7-
TROUBLE SHOOTING
Ａｌｌ ｔｈｅ ｓａｒｅ ｐａｒｔｓ ｂｅｌｏｗ ｃａｎ ｂｏｕｇｈｔ ｆｒｏｍ ｌｏｃａｌ ｄｉｓｔｒｉｂｕｔｏｒ．
X2-01A X2-02A
Upper body-Red
X2-01B
Upper body-Black
X2-03 X2-04
Blades Motor A
X2-07
Circuit board USB charger wire
X2-08
-8-
Lower body-Red
X2-05
Motor B Battery
X2-09
Transmitter
X2-02B
Lower body-Black
X2-06
BREAKDOWN & DIAGRAM
０５
０１
０２
０３
Ｃｏｄｅ Ｄｅｓｃｒｉｐｔｉｏｎ Ｑｕａｎｔｉｔｙ Ｃｏｄｅ Ｄｅｓｃｒｉｐｔｉｏｎ Ｑｕａｎｔｉｔｙ Ｃｏｄｅ Ｄｅｓｃｒｉｐｔｉｏｎ Ｑｕａｎｔｉｔｙ
01
02
03
Ｕｐｐｅｒ ｂｏｄｙ
Ｒｅｃｅｉｖｅｒ ｂｏａｒｄ
Ｒｏｔａｔｉｎｇ ｍｏｔｏｒ
1
04
Ｒｏｔａｔｉｎｇ ｂｌａｄｅ
1
2
Ｒｅｖｅｒｓｉｎｇ ｂｌａｄｅ
05
06
Ｔｒａｎｓｐａｒｅｎｔ ｐｉｅｃｅ
2
07
Ｂａｔｔｅｒｙ
08
09
Ｒｅｃｅｉｖｅｒ ｍｏｔｏｒ
Ｌｏｗｅｒ ｂｏｄｙ
2
1
０４
０６
０７
０８
０９
1
2
1
-9-
MAIN PARAMETER
９５ｍｍ ９５ｍｍ
９５ｍｍ
３５ｍｍ
95mm
95mm
35mm
3.7V/150mAh
-10-
Loading...