www.sylvania.com
QUICKTRONIC® POWERSENSE® T8
Universal Voltage Dimming Systems
High Efficiency Series
Lamp / Ballast Guide
32W T8 - SYLVANIA OCTRON® lamps
1-lamp QTP1x32T8/UNV DIM
2-lamp QTP2x32T8/UNV DIM
3-lamp QTP3x32T8/UNV DIM
4-lamp QTP4x32T8/UNV DIM
Primary Lamp Types
FO32, FBO32 & FBO31
Also operates:
FO30/SS, FO28/SS, FO25/SS, FO25,
FO17, FBO24 & FBO16
Key System Features
• Industry’s rst ballast that combines
dimming inputs from 0-10V and/
or two-wire AC dimming providing
maximum flexibility
• Compatible with low voltage and
power line fluorescent dimmers
• High Efciency
• NEMA Premium Electronic Ballast
Program compliant
• Lamp Detection Technology
• Universal voltage (120-277V)
• 100 - 5% Dimming Range
• PROStart® Programmed Rapid Start
• Anti-ash circuitry - turns on in
dimmed mode
• Operates at >42kHz
• QUICK 60+ ballast and lamp warranty
• RoHS compliant
• Lead-free solder and manufacturing
process
Application Information
SYLVANIA QUICKTRONIC
POWERSENSE ballasts
are ideally suited for:
• Occupancy sensors
• Daylight harvesting
• Energy management
• Load shedding
• New construction
• Retrot
ECS201R2 - 8/2011
SYLVANIA QUICKTRONIC High Efficiency,
POWERSENSE T8 electronic ballasts offer
several advantages:
• Wide Dimming Range: operate linear
fluorescent T8 lamps over a 100-5%
dimming range and provide true
versatility in controls selection.
• Industry’s Most Adaptable Dimming
Ballast: ballasts feature micro-controller
technology for compatibility with:
• low voltage controls
• power line uorescent dimmers
• any line voltage from 120V to 277V
• Unmatched Performance: patented
lamp detection technology that virtually
eliminates variations in brightness from
lamp-to-lamp and provides uniform
lighting throughout the dimming range.
At light levels of >75% unnecessary
lamp-coil power is turned off, delivering
energy efficiences comparable to nondimming Instant start electronic ballast.
This technology also eases installation
and troubleshooting by recognizing
failed lamps, faulty wiring or loose
connections, and shutting down.
System Information
QUICKTRONIC POWERSENSE ballasts operate from standard low
voltage (0-10VDC) fluorescent controllers or compatible 2-wire
power line fluorescent dimmers, making them ideal for individual
office lighting or automated building applications, both in new
construction and retrofit projects.
For the individual office or conference room, installation can be
streamlined by using a 2-wire power line fluorescent dimmer;
eliminating the need for additional control wires.
For more advanced systems, such as daylight harvesting or
building automation applications, standard low voltage devices
SAVINGS PER YEAR* vs LIGHT LEVEL
$50.00
$38.28
$40.00
$30.00
$19.80
$20.00
Savings per Year ($)
2 Lamp Fixture
$10.00
$0.00
0% 25% 50% 75% 100%
* FO32/XP lamps with QUICKTRONIC T8 POWERSENSE ballast
* Based on 4000 hrs/yr, $0.11/kWh, and 120V operation
* Savings per Year (@Light Level) = Cost of operation (100% Light Level) - Cost of operation (@Light Level)
(QTP T8 Dimming Ballast)
Light Level (%)
4 Lamp Fixture
When the problem is corrected,
the system restarts automatically.
• NEMA Premium Electronic Ballast
Program compliant. This program
promotes the use of high efficiency
T8 electronic ballasts by meeting
or exceeding the Ballast Efficiency
Factors, (BEF) established by the CEE,
(Consortium for Energy Efficiency). For
additional information on this program
go to: www.cee1.org or www.nema.org
(0-10VDC, Class 1 or 2) are used to control the lighting system.
In this daylight harvesting example, each lighting fixture (or
xture row) is controlled by it’s own photosensor; regulating
the light output to compensate for changes in natural daylight.
Depending upon the specific application, energy savings of up
to 60% compared to fixed output T8 electronic systems can be
realized.
All QUICKTRONIC POWERSENSE ballasts include a line voltage
protection circuit, which protects the ballast in the event that line
voltage is inadvertently applied to the low voltage control inputs.
Fixture
Window / Natural Light Source
Fluorescent Controllable
Lighting Systems
These ballasts are RoHS compliant
and feature lead-free solder and
manufacturing process.
Setting the standard for quality,
QUICKTRONIC POWERSENSE ballasts
are covered by the QUICK 60+®
warranty, the first and most
comprehensive lamp & ballast
system warranty in the industry.
DAYLIGHT HARVESTING SCENARIO
Light
1
Sensor 1
Fixture
2
Light
Sensor 2
Fixture
3
Desired Illuminance E
Constant setpoint value
Light
Sensor 3
POWERSENSE
T8 DIM
r
LINE
BLACK
NEUTRAL
WHITE
INSULATE
UNUSED LEADS
VIOLET
(+)
GREY (-)
SPECIFICATION DATA
Catalog # Date Type
Project Prepared by
Comments
T8 POWERSENSE
High Efficiency
QUICKTRONIC® POWERSENSE® Controls Information
Fluorescent Building
Controls Powerline 0-10 VDC Photo Occupancy Management
Manufacturer Controllers Controllers Cells Sensors Systems
Sylvania
www.sylvania.com/controls
Acuity Brand Controls
www.acuitybrandscontrols.com
Blue Ridge Technologies
www.brtint.com
Cooper Greengate
http://greengate.coopercontrol.com
CONTROLS
Encelium
POWERSENSE
www.encelium.com
Hunt Dimming
www.huntdimming.com
Lehigh Electric Products
www.lehighdim.com
Leviton
www.leviton.com
Sensor Switch
www.sensorswitch.com
Siemens Building Technology
http://sbt.siemens.com
Starfield Controls
www.starfieldcorp.com
Watt Stopper
www.wattstopper.com
Please contact controls manfacturer to order/specify controls. For the latest controls list go to www.sylvania.com
Also, for more information, refer to the LCA (Lighting Controls Association) site: http://lightingcontrolsassociation.org
Dimensions:
1 & 2 lamp enclosure
Overall: 9.5" L x 1.68" W x 1.0" H (241 x 43 x 25 mm)
Mounting: 8.90" (226 mm)
Weight: 1.1 lbs each (500 g)
3 & 4 lamp enclosure
Overall: 16.7" L x 1.68" W x 1.0" H (425 x 43 x 25 mm)
Mounting:16.2" (411 mm)
Weight: 2.1 lbs each (950 g)
Wiring:
Leads Only
Input & Control
Wiring Options:
LOW-VOLTAGE CONTROL
LINE
NEUTRAL
Class 1 or
Class 2
Please consult manufacturers listed for their latest control models and to order their controls.
Specifications subject to change without notice.
X X X X X
X X X X X
X X X X X
X X X X
X X X X
X X X
X X X
X X X X
X X
X X X X
X X X X X
Mounting
Length
Length
Mounting
411.3mm
(16.2")
Length
425mm
(16.7")
Height
25.4mm
(1.0")
Height
8.70 mm
Slot
Width
POWERLINE CONTROL
BLACK
WHITE
VIOLET
GREY (-)
(+)
0-10V
< 0.5mA
BLACK
WHITE
VIOLET
(+)
DC
GREY (-)
LINE
NEUTRAL
INSULATE
UNUSED LEADS
Control Specifications/model numbers may change.
Width
43mm
(1.68")
Controls Guide
X
Install and wire these ballast and controls
in accordance with the National Electrical
Code (NEC), all applicable Federal, State and
local electrical codes, as well as the specific
instructions provided with the compatible
control that you purchased. Installation should
be performed by qualified personnel only.
These instructions are guidelines only.
Installation may vary for different controls/
fixtures/applications. Be sure to follow the
control instructions and all applicable codes
and standards when installing dimming
systems.
Please contact controls manufacturer listed
in the OSRAM SYLVANIA Inc. controls cross
reference for compatible controls and
instruction wiring.
NOTES:
1. Dimming ballasts source < 0.5mA
(0-10VDC control input).
2. Powerline controls must be rated for the
type (e.g. Fluorescent Phase-control)
and size (e.g. 600W, 1000W, 1500W &
2000W etc.) of the connected load. Do
NOT use incandescent powerline controls;
incandescent dimmers are not rated for
fluorescent loads and are NOT compatible
with POWERSENSE ballasts.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Warning